• Journal of electromagnetic engineering and science
• /
• v.17 no.3
• /
• pp.159-164
• /
• 2017

This article proposes a design of chipless RFID tag with dipole array structure that is fully printable using conductive ink. The proposed tags encode data based on spectral signature modulations. The reading range is considerably increased (2 m) while maintaining low transmission power (1 mW). Several prototype chipless RFID tags were fabricated and measured in the SHF and UHF bands. The proposed dipole array structure enhances the antenna gain of the passive tags and contributes to overcoming the low conductivity of conductive ink. In order to verify the utility of our proposal, the tags are manufactured on paper, using conductive ink, for the purpose of economic mass production.

• The KSFM Journal of Fluid Machinery
• /
• v.2 no.3 s.4
• /
• pp.24-29
• /
• 1999

The ASME strainers have been newly installed at the suction side of each reactor coolant pump to get rid of the foreign materials which may damage the pump impeller or interfere with the coolant path of fuel flow tube or primary plate type heat exchanger. The strainer was designed in accordance with ASME SEC. III, DIV. 1, Class 3 and the structural integrity was verified by seismic analysis. The screen was designed in accordance with the effective void area from the result of flow analysis for T-type strainer. After installation of the strainer, it was confirmed through the field test that the flow characteristics of primary cooling system were not adversely affected. The pressure loss coefficient was calculated by Darcy equation using the pressure difference through each strainer and the flow rate measured during the strainer performance test. And these are useful data to predict flow variations by the pressure difference.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3318-3326
• /
• 2010

Five new series of 3,4-ethylenedioxythiophene derivatives carrying important pharamacophores, viz., amide, ester, ether and active secondary aryl moieties have been designed and synthesized through multistep reactions starting from thiodiglycolic ester and diethyl oxalate. They have been characterized by elemental and spectral data. All the target compounds have been screened for their anticonvulsant activity at three different models viz. maximal electroshock (MES), subcutaneous metrazole (scMET), and 6 Hz screen and evaluated for their neurotoxicity in rotorod model. Compound 6a emerged as lead with no neurotoxicity. All the five series of compounds are safe in the toxicity studies at the maximum dose of 300 mg/kg of body weight. Amongst the tested compounds, the ester pharmacophore with thioamide fragment has showed better activity than the other analogs.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.5
• /
• pp.561-569
• /
• 1999

The effects of longitudinal heat conduction on the performance of heat transfer surfaces are investigated by using a single-blow method. In the transient testing method for determining the heat transfer characteristics, exponential inlet temperature variations are made by using screen-mesh heater with small time constant and low frontal velocities of the test section, and the experimentally determined inlet temperature profile is used as the inlet fluid temperature condition. The effects of longitudinal heat conduction are negligible only if $\gamma^\act<0.05\;and \;N_{tu}\le3$ and should be considered if $N_{tu}\le3$ The test results ate compared with the existing theoretical and experimental data and the validity of this technique is confirmed by the good agreement.

• International journal of advanced smart convergence
• /
• v.11 no.3
• /
• pp.150-156
• /
• 2022

Recently, the use of Unreal Engine for animation production is increasing. In this situation, Unreal Engine's 'MetaHuman Creator' helps make it easier to apply realistic characters to animation. In this regard, we tried to produce animations using 'MetaHuman' and verify the effectiveness and differences from the animation production process using only Maya software. To increase the efficiency of the production process, the animation process was made with Maya software. We tried to import animation data from Unreal Engine and go through the process of making animations, and try to find out if there are any problems. And we tried to compare animations made with realistic 'MetaHuman' characters and animation works using cartoon-type characters. The use of the same camera lens in realistic character animations and cartoon character animations produced based on the same scenario was judged to be the cause of the lack of realistic animation screen composition. The analysis revealed that a different approach from the existing animation camera lens selection is required for the selection of the camera lens in the production of realistic animation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.27-33
• /
• 2009

Content used in mashups is typically obtained from a third party source through a public interface or API (web services). Other methods of obtaining content for mashups include Web feeds (e.g. RSS or Atom), and screen scraping. A mashup or meshup Web application has two parts: A new service delivered through a Web page, using its own data and data from other sources. The blended data, made available across the Web through an API or other protocols such as HlTP, RSS, REST, etc. There are many types of mashups, such as consumer mashups, data mashups, and Business Mashups. The most common mashup is the consumer mashup, which are aimed at the general public. Examples include Google Maps, iGuide, and RadioClouds. 4D Wall-map display is data mashups combine similar types of media and information from multiple sources into a single representation. This technology focus data into a single presentation and allow for collaborative action among ITS-related information sources.

• Toxicological Research
• /
• v.16 no.2
• /
• pp.109-116
• /
• 2000

The purposes of our study were to optimize the conditions of the screening and testing methods for endocrine disruptors, to characterize these assays using several compounds with well-defined endocrine activity, and to compare the sensitivity between these assays currently undergoing validation. Two in vitro test systems, MCF-7 cells proliferation (E-screen assay) and competitive binding to estrogen receptors (ER) were selected to evaluate the estrogenic effects. 17$\beta$-Estradiol (E2) and diethylstilbestrol (DES) were used as a positive control in vitro test. Also, E2 and ethinyl estradiol (EE) were used as a positive control in vivo uterotrophic assay. In in vitro test, E2 and DES showed a strong estrogenic response at concentration of 1.0 nM. In uterotrophic assay, E2 (0.3 $\mu\textrm{g}$/kg) and EE (0.3 $\mu\textrm{g}$/kg) produced a significant increase in uterus and vagina weight in both immature and ovariectomized rats. Although we did not com-pared the specificity between in vivo and in vitro assays, these assay systems may serve as a good tool for endocrine disruptors screening methods. Our data indicate that these assay systems exhibit some difference in their sensitivity to the same estrogenic compounds. Therefore, as a first rapid screening assay for estrogenic activity qf unknown chemicals, at least two assay systems should probably be carried out with a view of high sensitivity and standardization conditions. Also, a careful validation tests are necessary to obtain a reasonable degree of reproducibility.

• Journal of Information Technology Services
• /
• v.11 no.3
• /
• pp.161-175
• /
• 2012

A novel concept of ICT based service, which is called N-device service, is proposed and implemented in the form of N-device smart education services. The N-device services are different from the existing N-screen services in terms of the number of devices a user is using for a specific service at the same time. A N-device service consists of several smart devices which are different in size, software and hardware platform, mobility, manufacturer and the like by fully utilizing the characteristic of each device. The major and unique features of N-device services are analyzed and depicted in a strict way. Those are shared role for each device, service by configurable device, one sensor multiple use, real-time data sharing, role shifting and new market creation. It is turned out that the N-device service is more human centric compared with existing ICT based services and can give richer digital experience to users because non-existent services become possible with the new concept. However, there exist several barriers to be implemented and commercialized in the real world. Those include high development cost and time, small market and different application platforms of devices. These barriers can be overcome by technical advances and cooperation between relevant parties. The smart education is very prominent area, in which the novel concept can be applied with high priority because Korean government announced its plan to boost up new educational services with big budget and these are acceptable by enthusiastic Korean parents and students. That's why the N-device service is implemented in the education area, which is called as "livessam(live teacher)," with four smart devices, IPTV, tablet PC, PC and smart phone. By providing both detailed service scenario and techniques, we shows that the novel education service is technically feasible and acceptable by teachers and students.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.432-435
• /
• 2002

We have developed and proposed the heavy ion CT system which consists of fluorescent screen and CCD camera equipped with image intensifier. In our system, we have measured the residual range of particles that passed a phantom and reconstructed the CT image for the distribution of relative stopping power by filtered back projection method with Shepp '||'&'||' Logan filter. The heavy ion $\^$12/C accelerated up to 400 MeV/u by HIMAC (Heavy Ion Medical Accelerator in Chiba) was used. Intensity of the beam output changes like macro pulse, the period being 3.3 sec and the width being 2 sec. The series of data was acquired in synchronizing with the pulse, leading to the improvement of S/N in the CT image. The fundamental performance was experimentally evaluated in the proposed system. The spatial resolution was estimated to be about 1 mm and the density resolution (electron density referred to water) to be about 0.01.

• Journal of Sasang Constitutional Medicine
• /
• v.19 no.2
• /
• pp.170-178
• /
• 2007

1. Objective This study was aimed to screen the potential antitumor activity of one kinds of Korean medicinal herb extracts against cancer cell lines and to evaluate the growth inhibition effect of L-1210 and S-180 cancer cell lines. 2. Methods It confirmed Anemarrhena asphodeloides extracts to screen the potential antitumor activity. Then, it was extracted with 4 kinds of solvents ; hexane, ethyl acetate, butanol and $H_2O$, and the Growth inhibition effect of these extracts were determined against cancer cell and normal cell. The results were as follows : The IC50(50% inhibitory concentration) values of Anemarrhena asphodeloides extracts were shown to be $253{\mu}g/ml$ against L-1210 cell lines. The IC50 values of ethyl acetate extracts were shown to be $915{\mu}g/ml$ against L-1210 cell lines. The IC50 values of butanol extracts were shown to be $52.3{\mu}g/ml$, $485{\mu}g/ml$ against L-1210, S-180 cell lines, respectively. The butanol extracts were more selectively effective than other extracts to cancer cell lines. 3. Conclusion From these data, it could be concluded that the Anemarrhena asphodeloides extracts to the Growth inhibition effect of L-1210 and S-180 cancer cell lines.