• 대한산업공학회지
• /
• 제41권2호
• /
• pp.137-143
• /
• 2015

This thesis focuses on the 3D interface tab page type and mode of screen that affect the usability of the small screen devices such as smartphone. The experiments examined eight 3D UI designs, combinations of two modes (Portrait, Landscape) of screen, and four types (Vertical data mountain, Horizontal data mountain, Vertical carousel, Horizontal carousel). Twenty-six participants participated in the experiment. The completion time, preference and fun score were measured. The results showed that the vertical data mountain type provide the best performance in terms of the all conditions. The results of this study suggest a practical approach for the 3D UI tab page design for the small screen devices.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.749-750
• /
• 2008

It is often required to display 3-D data onto a 2-D screen and to examine and verify validity of data. LIDAR data is a good example. They represent 3-D spatial information in text format. However, it is very difficult to examine data on a 2-D screen. A 3-D data viewing system has been implemented and tested in order to solve the problem.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.122-122
• /
• 2001

In this research, an Electronic White Board Control System is developed that stores and prints the data written on the white board. This control system is constructed using an embedded single board PC, whose function is the acquisition(from CCD image sensor system), processing and storing of the data on the screen. The properties of this system are as follows: 1. The system is able to move the screen on the right and left. 2. The system is able to output the data written on the screen to a connected printer. 3. The system is controlled by an external remote PC connected to the system by serial line as well as by the keys on the control panel. The data written on the screen can be sent to the external PC and then can be modified and stored...

• 대한지역사회영양학회지
• /
• 제28권3호
• /
• pp.206-219
• /
• 2023

Objectives: Screen time refers to the time spent using screen media, such as televisions, smartphones, computers, or tablets. Excessive exposure to screen media has been reported to negatively impact young children's health and development, including overweight, short sleep duration, and language delays. This study examined the association of screen time and mealtime media use with dietary behaviors among preschool children. Methods: A cross-sectional survey was conducted on parents of children aged three to five years using the online questionnaires of the Nutrition Quotient for Preschoolers (NQ-P) and the Dietary Screening Test (DST). Data from 261 children's parents were analyzed. Results: Of the 261 children, 96.9% used screen media, 55.6% used screen media for two hours or more daily, and 30.7% were exposed to screen media during meals. The NQ-P scores were significantly lower in the children with longer screen time and mealtime media use. Children who used screen media for two hours or more and those exposed to screen media during meals consumed kimchi less frequently and confectionery and sugar-sweetened beverages more frequently than children who used less than two hours and were not exposed to screen media during meals. In addition, they were more likely to be picky about food, refuse to eat, and less likely to feed themselves than children with shorter screen time and no mealtime media use. Conclusions: This study reported an association between unhealthy dietary behaviors, feeding difficulties, and screen time and mealtime media use among preschool children. Further research should explore effective strategies for reducing children's screen time.

• 대한기계학회논문집
• /
• 제12권3호
• /
• pp.590-598
• /
• 1988

본 연구에서는 난류유동이론을 적용하여 2차원 스크린의 후류에 관한 유동특 성을 연구하였다. 이를 위해 적합한 난류모델 및 스크린의 존재를 고려한 수치해석 방법을 연구하였다. 스크린의 저항이 커서 스크린 하류유동이 역류가 되는 경우도 포함하였다.

• 한국게임학회 논문지
• /
• 제16권3호
• /
• pp.117-126
• /
• 2016

스크린 클라이밍은 스크린 스포츠의 하나로 컴퓨터 시스템에 의해 내용이 인공암벽에 투사되며 사용자와의 상호작용에 의해 진행된다. 본 논문에서는 어린이의 발달과정과 스포츠 클라이밍에 대한 동기부여에 초점을 맞추어 고대동굴탐험을 소재로 한 스크린 클라이밍 게임을 구현하였다. 게임의 내용은 프로젝터로 인공암벽에 투사하며, 사용자와의 상호작용은 키넥트의 뎁스 정보를 이용해 사용자의 입력을 받음으로써 이루어진다. 이 게임은 어린이 대상 전시 행사에서 높은 관심을 보였으며, 앞으로 추가적인 스크린 클라이밍 게임 구현이 이루어져야 한다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.984-990
• /
• 2017

상용 CFD 프로그램 Flow-3d를 활용하여, 표면 장력 탱크 적용을 위한 메시 스크린의 모델링 및 추진제 배출 해석을 수행하였다. Flow-3d 내 거시적 다공성 매체 모델을 사용하였으며, $350{\times}2600$, $400{\times}3000$, $510{\times}3600$ DTW 메시 스크린에 대한 공극률, 모세관압, 항력계수를 스크린 모델에 대입 후, 기포점 측정 시뮬레이션을 수행하였다. 시뮬레이션 결과를 실험 데이터와 비교하였으며, 메시 스크린 모델링의 적절성을 검증하였다. 이를 기반으로 스크린 모델을 포함한 PMD 구조체에 대한 추진제 배출 해석을 수행하였다. 추진제는 액상의 NTO를 가정하였으며, $3{\times}10^{-3}g$ 가속 조건에서 초기 유량을 만족하도록 void를 유입시켰다. 메시 스크린을 통한 차압은 초기 약 270 Pa에서 시간에 따라 증가하였으며, 스크린 모델의 예상 기포점과 유사한 630 Pa에 이르기까지 액상 추진제 배출을 지속하였다.

• 대한기계학회논문집B
• /
• 제24권3호
• /
• pp.419-425
• /
• 2000

Multiple layer of wire screen is widely used in many compact devices to filter particulates and to heat or cool fluids. However, data of flow resistance and heat transfer through such layers are rare to find and thus they are experimentally investigated in this study. Compressed air is made to flow through it to find the Ergun constants over a wide range of the Reynolds number. Also, unsteady heating of the wire screen is performed to find the equivalent heat transfer coefficient between the screen and the air by fitting the unsteady air temperature. The obtained coefficients are expressed in terms of the Reynolds number and the Prandtl number.

• Ocean and Polar Research
• /
• 제28권4호
• /
• pp.385-393
• /
• 2006

Screening performance of the existing intake screens (drum and travelling screen) on mass impingement of marine animals, a euphausiid, Euphausia pacifica and a scyphozoan medusae, Aurelia aurita that have often clogged intake screens of the Uljin Nuclear Power Plant, was tested. The maximum tolerable densities of marine animals in the inflowing seawater upon the screen were estimated with two different approaches. First the maximum density of jellyfish was calculated from (1) passing amount of seawater per unit time through the screens and (2) the covered area of animals on the screens clogged. The maximum density of krill tolerable in the drum screen was cited from a simulated record of Uljin NPP, then those in the travelling screens were also calculated using the data of drum screen and ratio of seawater amount passing through the screens under the condition of 0.5m water column (W.C.) of the differential pressure (AP) produced by screens, an established permissible limit of ${\Delta}P$. Secondly, the screening performances were also tested by hydrodynamic measurements with various screen models in a circulating water channel equipped with a speed-controlling pump and a differential pressure gauge. From the first approach, the maximum tolerable densities of drum and travelling screen were calculated as 2.0 and $1.5ind/m^3$ for the Jellyfish and 900 and $680ind./m^3$ for the euphausiid, respectively. These densities estimated from the second approach were 2.1 and $0.8ind/m^3$ for the jellyfish and 1059 and $504ind/m^3$ for the euphausiid, respectively. These estimates were compared with the data from historic clogging events to evaluate the practical performance of these intake screens. The comparisons suggest a newly improved intake-screen of which performance should be at least seven times (approximately) better than the existing ones ior the krill and 3.2 times for the jellyfish, respectively, for preventing mass impingement, and for maintaining the condition of the differential pressure between the screens below 0.3 m W.C.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.177-180
• /
• 2005

Three dimensional shaded images are standard visualization method for CAD models on the computer screen. Therefore, much of the effort in the visualization of CAD models has been focused on how conveniently and realistically CAD models can be displayed on the screen. However, shaded 3D CAD data images captured from the screen may not be suitable for some application areas. Technical document, either in the paper or electronic form, can more clearly describe the shape and annotate parts of the model by using projected 2D line drawing format viewed from a user defined view direction. This paper describes an efficient method for generating such a 2D line drawing data in the vector format. The algorithm is composed of silhouette line detection, hidden line removal and cleaning processes.