• 제목/요약/키워드: 3 차원 파랑하중

검색결과 20건 처리시간 0.024초

파랑하중을 적용한 3차원 플로팅 구조물 해석

  • 송화철;박종서
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2011년도 춘계학술대회
    • /
    • pp.192-194
    • /
    • 2011
  • 육상의 자원고갈로 인한 해양자원의 관심 증가로 플랜트 사업의 수요가 증가함에 따라 플로팅 구조물의 안전성 확보를 위한 구조해석이 필요하다. 이 연구에서는 범용 유한요소 프로그램인 ABAQUS를 사용하여 3차원 플로팅 구조물의 상부구조물에 정적하중과 진폭의 크기가 다른 파랑하중을 적용하여 모멘트 및 변위를 비교한다.

  • PDF

착저식 OWC 파력발전장치의 파에너지 흡수효율 및 파랑하중 계산 (Prediction of Wave Energy Absorption Efficiency and Wave Loads of a Three-Dimensional Bottom-Mounted OWC Wave Power Device)

  • 홍도천;홍기용
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제13권1호
    • /
    • pp.47-52
    • /
    • 2010
  • 근해에 설치되는 3차원 착저식 OWC 파력발전 챔버 구조물의 파 에너지 흡수효율과 구조물에 작용하는 1차 및 시간 평균 2차 파랑하중의 해석기법을 보였다. 쌍동형 OWC챔버 내부의 변동압력을 각 챔버의 내부 자유표면 경계조건에 도입하였으며 챔버 내부는 Rankine, 외부는 유한수심 3차원 자유표면 Green함수에 연계된 하이브리드 적분방정식을 사용하여 포텐셜 유동을 해석하였다. 수치실험 결과로서 3차원 착저식 OWC 파일럿 플랜트의 파력발전 1차변환 효율과 구조물에 작용하는 반복 및 지속적인 파랑하중을 제시하였다.

3차원 플로팅 구조물의 반강접 접합부 해석 (Analysis of Semi-Rigid Connections on 3D Floating Structures)

  • 박종서;송화철
    • 한국항해항만학회지
    • /
    • 제36권3호
    • /
    • pp.175-180
    • /
    • 2012
  • 플로팅 상부구조물은 일반 건축물과 형태는 같지만 기초가 땅이 아닌 하부 부체에 지지되는 구조물로 파랑하중에 의한 영향을 크게 받으며, 파랑하중에 의한 하부구조물의 변형이 접합부에 영향을 미쳐 상부구조물의 이용자에게 사용성 및 안전성의 문제를 발생시키게 된다. 이에 따라 본 논문에서는 3차원 플로팅 구조물의 상부구조물과 하부구조물을 일체화한 전해석을 통하여 강접합과 반강접 접합에 대해 탄성 해석을 실시하였다. 구조물의 전해석과 하부구조물을 제외한 분리해석을 비교 분석 하였으며 탄성 해석을 통해 파랑하중의 CASE를 나누어 파랑하중의 변화에 따른 구조물의 모멘트 및 변위를 접합부에 따라 분류하고 비교하였다.

쌍동선의 파랑 동하중 추정 (Computations of Dynamic Wave Loads of a Catamaran)

  • 전호환;김문성;양진호
    • 대한조선학회논문집
    • /
    • 제36권2호
    • /
    • pp.50-60
    • /
    • 1999
  • 안전하고 경제적인 쌍동선형을 설계하기 위해서는 횡갑판(cross deck)에 작용하는 파랑 동하중의 정확한 추정이 필요하다. 본 논문에서는 Lee 등[3]이 제시한 2차원 스트립 방법을 6자유도 운동을 갖는 3차원의 경우로 확장하여 임의 입사파에서 파랑하중(수직 및 수평 전단력, 굽힘모멘트 및 비틀림모멘트)을 추정하였고, 발표된 계산 결과(스트립 방법 및 3차원 패널법) 및 Wahab 등[2]의 실험 결과와 비교하였다. 일반적으로 2차원 결과보다 3차원 방법이 실험 결과와 잘 일치하였으나, 같은 이론을 사용한 3차원 방법에 있어서도 몇몇 경우에 계산값의 차이가 있었다. 파랑하중 추정의 정도를 향상시키기 위해서 점성항의 고려 및 엄밀한 속도항의 고려가 필요하다고 생각된다.

  • PDF

계류시스템을 가진 부유식 파력발전기의 동적거동 해석 (Dynamic Analysis of Floating Wave Energy Generation System with Mooring System)

  • 최규석;손정현
    • 대한기계학회논문집A
    • /
    • 제37권2호
    • /
    • pp.257-263
    • /
    • 2013
  • 본 논문에서는 파력에너지를 전기에너지로 변환시키는 파력발전기를 다물체 동역학을 이용하여 모델링 하였으며, 계류시스템이 부유식 파력발전기에 미치는 영향에 대해서 분석하였다. 계류시스템이 파력발전기에 미치는 영향을 줄이기 위한 연구가 많이 이루어지고 있다. 구속방정식과 힘 요소를 이용하여 다물체 시스템을 모델링 하였으며, 3 차원 파랑하중을 적용하여 부유체에 작용하는 파력을 모델링 하였다. 파력발전기의 거동과 발전량을 분석하기 의해 상용 다물체 동역학 해석프로그램인 MSC/ADAMS 를 이용하였다. 계류시스템이 있을 때와 없을 때의 결과를 비교하였고, 특히 극한 파랑하중이 작용했을 때의 시뮬레이션을 통해 파력발전기의 안정성을 평가하였다.

쌍동선의 운동 및 파랑하중 해석 (Analysis of Motions and Wave Loads of Twin-Hull Ships in Waves)

  • 구자삼;조효제;이승철
    • 한국해양공학회지
    • /
    • 제13권4호통권35호
    • /
    • pp.132-142
    • /
    • 1999
  • A three-dimensional linearised potential theory is presented for the prediction of motions and dynamic structural responses of twin-hull ships travelling with forward speed in regular waves. Comparisons between theoretical and experimental results are shown for the motion responses and lateral wave loads of an ASR(anti-submarine rescue) catamaran. In general, good agreement between theory and experiment is found except for some discrepancies that are believed to be caused by neglect of forward speed effects on free surface.

  • PDF

복합요소법을 이용한 3-차원 해양구조물의 동적응답 (Hybrid Element Method for Dynamic Responses of Three-Dimensional Offshore Structures)

  • 이태갑;박우선;편종근
    • 한국해안해양공학회지
    • /
    • 제2권3호
    • /
    • pp.152-161
    • /
    • 1990
  • 본 논문에서는 임의형상 3-차원 해양구조물의 동적응답산정을 위한 복합요소법에 대해서 연구하였다. 유체의 동압에 의한 하중은 관성력이 중요하다고 가정하여 점성효과는 무시하였다. 해석적고유급수해를 사용하여 회절 및 방사문제를 해결하는 복합요소법의 수식화과정을 체계적으로 정리하였으며, 임의형상 3-차원 구조물의 회절 및 방사문제를 해결할 수 있는 전산프로그램을 개발하여 여러 형상의 구조물에 대해서 예제해석을 수행하였다. 타문헌의 결과와의 비교를 통하여, 복합요소법을 이용한 파랑하중 산정기법 및 본 연구에서 개발한 전산프로그램의 타당성을 입증하였다.

  • PDF

규칙파중을 항행하는 선박의 파랑하중해석 (Analysis of Wave Loads of Ships with Advancing Speed in Regular Waves)

  • 이승철;도덕희;구자삼
    • 동력기계공학회지
    • /
    • 제14권1호
    • /
    • pp.53-58
    • /
    • 2010
  • A three-dimensional source distribution method is presented for the prediction of motions and vertical bending moments of ships travelling with forward speed in regular waves. Comparisons between theoretical and experimental results are shown for the motion responses and vertical bending moment of the S175 container ship model by Watanabe et al. The model ship was made of synthetic resins so as to simulate bending rigidity of a full scale ship. Numerical results are compared with experimental and numerical ones obtained in the literature. The results of comparison confirmed the validity of the proposed approach.

3 차원 시간영역 근사비선형 2 차경계요소법에 의한 선체의 대진폭 운동 및 파랑하중 계산 (Estimation of Large Amplitude Motions and Wave Loads of a Ship Advancing in Transient Waves by Using a Three Dimensional Time-domain Approximate Body-exact Nonlinear 2nd-order BEM)

  • 홍도천;홍사영;성홍근
    • 대한조선학회논문집
    • /
    • 제47권3호
    • /
    • pp.291-305
    • /
    • 2010
  • A three-dimensional time-domain calculation method is of crucial importance in prediction of the motions and wave loads of a ship advancing in a severe irregular sea. The exact solution of the free surface wave-ship interaction problem is very complicated because of the essentially nonlinear boundary conditions. In this paper, an approximate body nonlinear approach based on the three-dimensional time-domain forward-speed free-surface Green function has been presented. The Froude-Krylov force and the hydrostatic restoring force are calculated over the instantaneous wetted surface of the ship while the forces due to the radiation and scattering potentials over the mean wetted surface. The time-domain radiation and scattering potentials have been obtained from a time invariant kernel of integral equations for the potentials which are discretized according to the second-order boundary element method (Hong and Hong 2008). The diffraction impulse-response functions of the Wigley seakeeping model advancing in transient head waves at various Froude numbers have been presented. A simulation of coupled heave-pitch motion of a long rectangular barge advancing in regular head waves of large amplitude has been carried out. Comparisons between the linear and the approximate body nonlinear numerical results of motions and wave loads of the barge at a nonzero Froude number have been made.

원형 실린더에 의한 3차원 비선형 산란 문제의 수치해석

  • 성홍근;최항순
    • 한국해안해양공학회:학술대회논문집
    • /
    • 한국해안해양공학회 1998년도 정기학술강연회 발표논문 초록집 Annual Meeting of Korean Society of Coastal and Ocean Engineers
    • /
    • pp.88-93
    • /
    • 1998
  • 수치 파수조기법은 해양구조물에 작용하는 비선형 파랑하중을 해석할 수 있는 가장 유망한 도구로 인식되고 있다. 이러한 수치 파수조기법은 새롭고 다양한 형태의 해양구조물에 대한 정확하고 엄밀한 설계는 물론이고, 실험 조파수조의 여러 가지 문제점을 극복하기 위해서도 매우 필요한 기법이라고 할 수 있다(Kim, 1995). 수치 과수조기법을 위한 경계치 문제 해석법으로는 고차경계요소법을 이용한 해석법이 가장 효율적인 것으로 알려져 있다. (중략)

  • PDF