• YAKHAK HOEJI
• /
• v.44 no.2
• /
• pp.155-161
• /
• 2000

New cephalosporin antibiotics , 3-[(4-carboxy-5-ethylthioisothiazol-3-yl)oxymethyl]-7-[(1H-tetra-zol-1-yl)acetamido]-3-cephem-4-carboxylic acid 2, 3-[(4-carboxy-5-ethylthioisothiazol-3-yl) oxymethyl]-7-[(2-aminothiazol-4-yl)acetamido]-3-cephem-4-carboxylic acid 3, 3-[(4-carb oxy-5-ethylthioisothiazol-3-yl)-oxymethyl]-7-[5-(ethylthio-3-hydroxyisothiazol-4-yl)carboxamido]-3-cephem-4-carboxylic acid 4, 3-[(4-car-boxy-5-ethylthioisothiazo1-3-yl)oxymethy1]-7-[(Z)-2-(fur-2-yl)-2-(methoxyimino)acetamido]-3-cephem-4-carboxylic acid 5, 7-[(Z)-2-(2-aminothiazol-4-yl)-2-[(alkoxyimino)acetamido]-3-[(4-carboxy-5-ethylthioisothiazol-3-yl)oxymethyl]-3-cephem-4-carboxylic acid 6-8 were synthesized. Antibacterial activities and structure-activity relationships of these new cephalosporin derivatives were examined. Among them, 7-[(Z)-2-(2-aminothiazol-4-yl)-2-(1-carboxy-1-methylethoxyimino)acetamido]-3-[(4-carboxy-5-ethylthylth-ioisothiazol-3-yl)oxymethyl]-3-cephem-4-carboxylic acid 7 exhibited good antibacterial activities compared to cefotaxime and ceftriaxone.

• Microbiology and Biotechnology Letters
• /
• v.26 no.6
• /
• pp.537-544
• /
• 1998

The cultivation conditions of transformant Alcaligenes eutrophus AER5 harboring cloned phbC gene for mass production of poly (3-hydroxybutyrate-3-hydroxyvalerate)[P(3HB-3HV)] containing high molar fraction of 3-hydroxyvalerate (3-HV) were investigated. In two-stage batch cultivation, transformant accumulated P(3HB-3HV) containing 52.2 mol% of 3HV compared to 30 mol% of parent strain A. eutrophus H16. The increased 3-HV molar fraction was due to the amplified activity of PHB synthase participating in condensation of 3-HB and 3-HV. To increase efficiency of P(3HB-3HV) accumulation, fructose was added along with precursor compound valerate, and total cell mass and P(3HB-3HV) concentrations remarkably increased, but not 3-HV molar fraction. The effect of magnesium ion showed that P(3HB-3HV) concentration and 3-HV molar fraction were significantly increased upto 6.1 g/L and 71.3 mol% at 0.01 g/L of MgSO$_4$, respectively. The efficiency of several pH adjuster, NaOH, NaOH and (NH$_4$)$_2$SO$_4$, and NH$_4$OH, on total cell mass, p(3HB-3HV) concentration, and 3-HV molar fraction was also compared. To overcome the disadvantage of two-stage cultivation, one-stage intermittent fed-batch cultivation was attempted, such a way 10.0 g/L of fructose was supplied for cell growth at initial 36 hr and then 10.0 g/L of valerate and 5.0 g/L of fructose were applied to induce the accumulation of P(3HB-3HV), consequently, 10.4 g/L of P(3HB-3HV) with 38 mol% of 3-HV fraction could be obtained after 72 hr. These results can be used for elucidating cultivation strategy for mass production of P(3HB-3HV) containing high 3-HV molar fraction using transformant A. eutrophus AER5 harboring cloned phbC gene.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.1
• /
• pp.7-12
• /
• 2017

3YSZ + (x) $Al_2O_3$ composites (x = 20, 40, 60, 80 wt%) were fabricated and the influences of particle sizes of $Al_2O_3$ on their microstructures and mechanical properties were investigated with XRD, SEM, vickers hardness and fracture toughness. $Al_2O_3$-3YSZ composites containing $Al_2O_3$ powder of a $0.3{\mu}m$ and an $1.0{\mu}m$, which are here in after named as $Al_2O_3$($0.3{\mu}m$)-3YSZ and $Al_2O_3$($1.0{\mu}m$)-3YSZ, respectively, were made by mixing raw materials, uni-axial pressing and sintering at $1,400^{\circ}C$, $1,500^{\circ}C$, and $1,600^{\circ}C$. $Al_2O_3$($0.3{\mu}m$)-3YSZ composites show the higher density and the better mechanical properties than $Al_2O_3$($1.0{\mu}m$)-3YSZ composites. The Vickers hardness of the $Al_2O_3$($0.3{\mu}m$)-3YSZ composites show a peak value of 1,997 Hv at the content of 60 wt% $Al_2O_3$, which is a slightly higher value in comparison with 1,938 Hv of the $Al_2O_3$($1.0{\mu}m$)-3YSZ composite. However, the fracture toughness of $Al_2O_3$-3YSZ composites monotonically increases with decreasing the content of $Al_2O_3$ without any peak values. $Al_2O_3$($0.3{\mu}m$)-3YSZ and $Al_2O_3$($1.0{\mu}m$)-3YSZ composites sintered at $1,600^{\circ}C$ have a maximum value of a $6.9MPa{\cdot}m^{1/2}$ and a $6.2MPa{\cdot}m^{1/2}$, respectively at the composition of containing 20 wt% $Al_2O_3$. It should be noticed that the mechanical properties and the sintering density of the $Al_2O_3$-3YSZ composites can be enhanced by using more fine $Al_2O_3$ powder due to their denser microstructure and smaller grain size.

• Journal of the Korean Vacuum Society
• /
• v.11 no.3
• /
• pp.183-188
• /
• 2002

In the present study AI$(CH_3)_3)$films were deposited by the ALD technique using trimethylaluminum(TMA) and ozone to improve the quality of the AI$(CH_3)_3)$ films, since the $OH^-$ radicals existing in the AI$(CH_3)_3)$ films deposited using TMA and $H_2O$ degrade the physical and the dielectric properties of the AI$(CH_3)_3)$ film. The XPS analysis results indicate that the $OH^-$ radical concentration in the AI$(CH_3)_3)$film deposited using $O_3$is lower than that using $H_2O$. The etch rate of the AI$(CH_3)_3)$film deposited using $O_3$is also lower than that using $H_2O$, suggesting that the chemical inertness of the former is better than the latter. The MIS capacitor fabricated with the TiN conductor and the $Al_2$O$_3$dielectrics formed using $O_3$offers lower leakage current, better insulating property and smaller flat band voltage shift $({\Delta}V_{FB})$.

• Journal of the Korean Chemical Society
• /
• v.38 no.5
• /
• pp.377-381
• /
• 1994

New bis-crown ethers containing siloxane chain were synthesized. 1,3-Bis(trimethylsiloxy)-1,3-dimethyl-1,3-dipentaoxacyclohexadecamethyl disiloxane (1) was synthesized by reaction of 3-methylene-16-crown-5 (8) with 1,3-bis(trimethylsiloxy)-1,3-dimethyl disiloxane (10) in the presence of Pt catalyst. 1,1,3,3,5,5-Hexamethyl-1,5-dipentaoxacyclohexadecamethyl trisiloxane (2) was synthesized by the reaction of crown ether (8) with 1,1,3,3,5,5-hexamethyl trisiloxane (11) in the presence of Pt catalyst. 3-Methylene-13-crown-4 (7), 3-methylene-16-crown-5 (8), and 3-methylene-19-crown-6 (9) were synthesized by the reaction of triethylene glycol (3), tetraethylene glycol (4), and pentaethylene glycol (5) respectively with 3-chloro-2-chloro-methyl-1-propene (6) in the presence of NaH.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.2
• /
• pp.152-164
• /
• 1995

$xPb(Fe_{1/2}Nb_{1/2})O_3 - (1 - x)Pb(Mg_{1/3}Nb_{2/3})O_3$ powders were synthesized by the molten salt synthesis method using the NaC!- KCI flux with 1 : 1 molar ratio, and their powders and dielectric properties were investigated. The synthesized powders showed less agglomerated shape with the average particle size of less than $2 \mu\textrm{m}$. The composition $x0.3Pb(Fe_{1/2}Nb_{1/2})O_3-0.7Pb(Mg_{1/3}Nb_{2/3})O_3$ could be sintered at $1000{\times}C$ and its dielectric constnat was over 11, 000.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.3
• /
• pp.27-33
• /
• 2003

The image-based 3D modeling is the technique of generating a 3D graphic model from images acquired using cameras. It is being researched as an alternative technique for the expensive 3D scanner. In this paper, we propose the image-based, 3D modeling system using calibrated stereo cameras. The proposed algorithm for rendering, 3D model consists of three steps, camera calibration, 3D reconstruction, and 3D registration step. In the camera calibration step, we estimate the camera matrix for the image aquisition camera. In the 3D reconstruction step, we calculate 3D coordinates using triangulation from corresponding points of the stereo image. In the 3D registration step, we estimate the transformation matrix that transforms individually reconstructed 3D coordinates to the reference coordinate to render the single 3D model. As shown the result, we generated relatively accurate 3D model.

• Korean Journal of Microbiology
• /
• v.40 no.1
• /
• pp.60-64
• /
• 2004

We tested gentamicin - resistant bacteria isolated from hospital sewage to confirm the presence of aac(3)II encoding aminoglycoside- (3)-N- acetyltransferase by dot-blot hybridization. A probe from the internal fragment of aac(3)II was hybridized to DNA from 41 % (39/95) of gentamicin resistant isolates. PCR was performed with primers from aac(3)II and Tn3. Of 39 strains, 13 strains had Tn3-aac(3)II structure. Minimal inhibitory concentration (MIC) test demonstrated that 18 strains containing Tn3-aac(3)II showed higher resistance to gentamicin than those of other strains. Thirteen strains were identified as 5 Escherichia coli, 3 Acinetobacter johnsonii, 2 Enterobacter agglomerans, 2 Micrococcus luteus, and 1 Pseudomonas facilis. These results suggest that gentamicin-resistant determinant of Tn3-aac(3)II structure was widely distributed in the gentamicin-resistant bacteria.

• Journal of the Korean Ceramic Society
• /
• v.38 no.8
• /
• pp.705-709
• /
• 2001

SrTiO$_3$에 Pr$^{3+}$ 이온, 또는 Pr$^{3+}$ 이온과 Ga$^{3+}$ 이온을 첨가하여 합성한 형광체와 floating zone method로 성장시킨 단결정의 PL 특성을 조사하였다. 분말 형광체와 단결정에서 모두 Ga$^{3+}$ 이온이 함께 첨가되었을 때 적색 발광 세기가 크게 증가하였다. XRF(X-Ray Fluorescence) 측정결과 Ga$^{3+}$ 이온이 함께 첨가되었을 때 SrTiO$_3$결정 격자내의 Pr$^{3+}$ 이온의 농도가 증가하였다. Ga$^{3+}$ 이온이 함께 첨가되었을 때 적색 발광 세기가 증가하는 것은 첨가된 Ga$^{3+}$ 이온이 결정내 발광 center인 Pt$^{3+}$ 이온의 농도가 증가시켰기 때문이며, 또한 Ga$^{3+}$ 이온이 hole trap center로 작용하기 때문인 것으로 생각된다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.8 no.3
• /
• pp.198-203
• /
• 1992

Theoretical predictions of the atmospheric equilibrium involving $HNO_3, NH_3 and NH_4NO_3$ were compared with atmospheric measurements of particulate nitrate$(NO_3^-)$, $HNO_3$ and $NH_3$ concentration by triple filter pack sampler and Andersen air sampler in Seoul from 8th to 11th Oct 1991. The measured $HNO_3-NH_3$ concentration product K was higher than equilibrium costant Kc calculated from thermodynamic data of $HN_4NO_{3(s)} -HNO_{3(g)} -NH_{3(g)}$. The cause of K is greater than Kc was the result of air pollution, partcicularly anthropogenic $NH_3$.