• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.6
• /
• pp.61-67
• /
• 2018

The face milling cutter, which is mainly used for the face milling, is used to cut the Carbon steel(SM20C) in the machining center for 5 times and 10 times respectively. This study clarify the dimensional accuracy characteristics according to the number of fine machining varied the condition of cutting depth, table feed speed and spindle speed. Cutting depth is varied 0.05~0.2mm, table feed speed is varied 0.05~0.2mm/min and spindle speed is varied 1500~2500rpm. As a result, the dimensional accuracy was stable 6 times machining with table feed speed 150mm/min and 10 times machining with table speed 100mm/min and cutting depth 0.05mm regardless times of machining.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.10
• /
• pp.45-51
• /
• 2021

In this paper, we propose a 3D design method of the vacuum forming method of the front part to improve the lightness and production efficiency of agricultural electric vehicles. For agricultural electric vehicles, lightness and production efficiency are more important than the strength of materials for collision protection. In this paper, we propose a vacuum forming design method that can replace complex machining processes such as laser machining, bending, and painting. The main purpose of this research is to improve product stability, productivity and convenience through 3D design of the front part and development of vacuum forming mold technology. Research procedure follows the 3D modeling of the front part using CATIA, finite element analysis for the structural stability using ABAQUS, manufacturing prototype for the investigation of the dimensions using 3D scanner and actual driving test under agricultural electric vehicle usage environment. The results verifies the proposed 3D design method of the vacuum forming method and are expected to be widely used by agricultural workers through the simplification of the production process of agricultural electric vehicles.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.6
• /
• pp.364-373
• /
• 2009

In this paper, we suggest the method for constructing parameterized human body model which has any required body sizes from 3D scan data. Because of well developed 3D scan technology, we can get more detailed human body model data which allow to generate precise human model. In this field, there are a lot of research is performed with 3D scan data. But previous researches have some limitations to make human body model. They need too much time to perform hole-filling process or calculate parameterization of model. Even more they missed out verification process. To solve these problems, we used several methods. We first choose proper 125 3D scan data from 5th Korean body size survey of Size Korea according to age, height and weight. We also did post process, feature point setting, RBF interpolation and align, to parameterize human model. Then principal component analysis is adapted to the result of post processed data to obtain dominant shape parameters. These steps allow to reduce process time without loss of accuracy. Finally, we compare these results and statistical data of Size Korea to verify our parameterized human model.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.6
• /
• pp.155-164
• /
• 2020

In this paper, we proposed the dimensional system and pattern of middle-aged women's rashguard swimwear for breast cancer patients. First, a survey of 37 breast cancer patients was conducted to determine the preferred swimsuit design for breast cancer patients. According to a survey of breast cancer patients, a rashguard swimwear with a low-exposure chest was designed. It has a pocket shape in which the cap is easy to insert and the cap is fixed. Second, we developed a dimensional system for swimsuits for breast cancer patients. Using direct measurement data from Size Korea for 1,625 women aged 30 to 69, 17-sizes for breast cancer patient's swimsuits were set through cross-analysis of major dimensions, with a coverage rate of 74.3%. It also extracted a standard size of bust circ. 90cm, hip circ. 95cm, and trunk circ. 150cm. Third, we developed a pattern for the central size of the swimsuit for breast cancer patients. For this purpose, we first produced the first central size pattern, and then completed the pattern after modifying it through the second and third wearing experiments. Experimental suits were produced at each pattern-making stage to evaluate wearing fit and motion suitability. Finally, the reduction rate of each dimension item for optimal pattern production was obtained, and the lashguard swimwear pattern for breast cancer patients was developed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1B
• /
• pp.89-100
• /
• 2010

The performance evaluation of a conventional Wave Resonator at the entrance of harbors against solitary wave has been performed using 3D numerical wave flume. A wave resonator has been designed for the attenuation of the transmitted wave energy by trapping the short periodic incident waves only. In this study, however, the controlled performance of the wave resonator by its various widths has been numerically investigated for solitary waves. Source distribution method based on the Green function and the 3D one-field Model for immiscible TWO-Phase flows (TWOPM-3D) using 3D numerical wave flume were used for the short-periodic waves and the solitary waves, respectively, and these models were verified through the comparisons with the previous experimental and numerical results by other researchers. It was confirmed that the wave resonator is effective enough to control the solitary waves as well as the periodic waves when it compares with the case of no resonance system. Further, it was found that there is the optimal width of a wave resonator to attenuate the target solitary waves.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.8
• /
• pp.921-926
• /
• 2014

In this paper, the characteristics of inset fed microstrip antenna loaded with CSLR(complementary single loop resonator) are studied. Effective permeability parameters of the SLR unit cell is retrieved from simulated scattering parameters, and structure parameters of the SLR unit cell are selected so that effective permeability is negative value at the operating frequency. The optimized inset fed microstrip antenna loaded with SLR for a $3{\times}3$ array in the ground plane of a conventional patch antenna is designed and simulation results of return loss and radiation pattern are shown. At resonant frequency 2.82 GHz, the overall dimension of the proposed antenna is reduced by approximately 56.8% compared to the conventional inset fed antenna. Simulation results are obtained by 3D FEM solver(Ansoft's HFSS).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1837-1840
• /
• 2009

최근 자연형하천 조성사업과 하천복원 등을 목적으로 하천의 치수, 이수적인 기능뿐만 아니라 생태적인 기능을 고려한 하천설계를 위하여 많은 노력들을 하고 있다. 이와 같은 목적으로 하천의 생태적 통로가 단절되는 것을 막기 위해 하천 횡단 구조물인 보와 낙차공에 어도를 설치하고 있다. 하지만 현재 어도 설계는 어도 내의 흐름특성을 정확히 고려하지 못하고 설계되어 어도 본래의 기능을 수행하지 못하는 경우가 많았다. 그 이유는 현장 상황에 따라 어도의 종류와 형태가 다양하게 설계되고 있는 것에 반해 이를 검토할 수 있는 방법이 수리실험으로 한정되어 있어서 어도내 흐름특성을 결정하기 어렵기 때문이다. 어도 설계를 위한 수리실험은 시간적, 공간적 및 경제적인 제약으로 인해 다양한 형태의 어도 조건과 수리조건을 검토하기에는 현실적으로 어려움이 있는 반면에 수치모의는 매개변수 결정에 어려움이 있지만 수리실험에 비해 다양한 형태와 수리조건에 대해 간편하게 흐름특성을 예측할 수 있는 장점이 있다. 따라서 본 연구에서는 어도 설계시 간편하게 어도내 흐름특성을 예측할 수 있도록 기존에 사용되고 있는 수리실험 결과와 수치모의 기법을 이용한 흐름해석 결과를 비교하여 보았다. 수치모의는 3차원 흐름모형인 FLOW-3D를 이용하였고, 어도 형태는 도류벽식 어도를 대상으로 수행하였다. 수행 결과 수리실험과 비교하여 수심별로 최대 13% 정도의 오차를 보이고 있으며, 최대유속 발생 지점을 비교한 결과 하폭의 6% 정도 오차를 보였다. 따라서 최종 설계 이전에 어도의 흐름특성을 예측하기 위한 방법으로 FLOW-3D를 사용한다면 충분히 활용 가능할 것으로 판단된다.

• Science of Emotion and Sensibility
• /
• v.7 no.2
• /
• pp.157-161
• /
• 2004

The clothing by bias-cut fabric are outstanding in their shilluettes mainly due to their high level of drapability. The clothing, however, need a specific cutting process for being even trimming line skirts. The 3-D trimming system developed in the study has been successful in making high-quality skirts with extremely even trimming line. The system is expected to make quality apparel in shorter manufacturing time.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1476-1481
• /
• 2009

최근 기상이변과 국지성 호우로 인한 홍수피해를 경감하기 위해 국가차원과 더불어 지역단위의 홍수방어대책이 많은 사업을 통해 제시되고 있다. 대표적인 예로 풍수해저감종합계획과 하천기본계획 등을 들 수 있는데 이러한 사업들은 실제 피해지역에 대한 원인과 대책을 제시함과 동시에 홍수 등의 피해가 예상되는 위험지역에 대해서도 그 원인과 대책을 제시해야한다. 따라서 피해발생이 예상되는 지역을 예측하고 그 원인을 찾는데 있어 최근 홍수범람해석에 대한 필요성이 점차적으로 증대되면서 다양한 해석모형과 프로그램들이 개발되었고 현재까지도 홍수범람분석에 관한 활발한 연구들이 이루어지고 있다. 그러나 홍수범람구역을 결정하기 위한 과정은 GIS Tool에 대한 이해도 부족, 원 자료의 부족, 지형 구축을 위한 자료생성의 어려움 등과 같은 다양한 문제점들을 내포하고 있다. 특히, 홍수범람구역의 결정을 위한 전산프로 그램의 기능향상은 점차 향상되는데 비해 지형구축 등과 같은 범람해석 프로세스 내에서 상당한 수작업이 요구되는 바 작업소요시간이 많이 요구되는 단점으로 인해 실무자들에게 널리 적용되는데 있어 걸림돌이 되고 있는 실정이다. 따라서 본 연구에서는 실무적 관점에서 홍수범람해석의 요구빈도가 높은 중소규모 자연하천을 대상으로 두가지 해석 기법을 통하여 홍수범람해석을 수행하여 해석 과정 및 결과 등을 비교하였다. 첫 번째 기법으로 홍수범람해석을 수행하는데 있어 실용성, 신속성 등이 고려된다고 판단되는 Civil 3D를 이용하여 수치지형도 및 측량자료와 같은 원 자료로부터 3D 지형을 구축하고 Civil 3D의 Extension 프로그램인 HEC-RAS Tool과 1차원 수리모형인 HEC-RAS를 전 후처리에 연계함으로서 각 대상유역별, 빈도별 홍수위에 따른 홍수범람구역과 수심 및 범람지역을 우선적으로 분석하였다. 두 번째 기법으로서 실무에서 주로 이용되고 있는 ArcGIS를 이용하여 3D 지형을 구축하고 Hydrologic Engineering Center (HEC)와 Environmental Systems Research Institute(ESRI)의 협력개발로 개발된 HEC-GeoRAS와 HEC-RAS 모형을 전 후처리에 연계하여 홍수범람해석을 수행하였다. 이들 두 가지 기법을 통한 홍수범람해석의 과정과 결과에 대해 정량적, 정성적 비교를 수행하였으며, 두 기법간의 차이점 및 효율성을 제시하였다. 본 연구의 결과는 보다 실용적이면서도 정밀한 홍수범람구역의 결정, 홍수범람 예상도 등의 재해지도 작성, 치수경제성 분석 등에 있어 도움이 될 것으로 판단된다.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.5
• /
• pp.117-126
• /
• 2020

In this study, a 3D simulation program was used to produce a bodice prototype of a middle-aged male in their 40s and 50s and then analyze the appearance evaluation and airgap, sectional view, color distribution through virtual wearing to compare and analyze the differences between patterns. Through this, it was intended to provide basic data necessary for pattern development to companies that manufacture and produce clothing for middle-aged men. As a result of analyzing, J pattern was analyzed as the most suitable body shape pattern for middle-aged men. E pattern was too tight and L pattern and N pattern had too much spaces. However, J patternt was analyzed that correction was necessary in setting center back and center front length. The aging phenomenon in which the back is slightly bent forward and shoulders are also inclined is expected to appear, so it is necessary to adjust the front-to-back length, shoulder angle, and shoulder length. It is considered that after developing the research pattern by modifying J pattern, it is necessary to develop a body shape prototype for middle-aged men through actual clothing experiments on middle-aged men.