• Proceedings of the ESK Conference
• /
• 1995.04a
• /
• pp.51-51
• /
• 1995

인체 CAD 모델링 시스템은 장비와 인체를 모델링하여설계 초기단계에서 부터 별도의 Mock-up 없이 전 벙위의 운용자에 대한 작업자세의 안락도(Comfort), 동작한계(Reach), 적 합성(Fit), 시계(Vision)등 제반 작업공간 설계 및 평가에 수반되는 고려요소들을 보다 과학적 이고 합리적으로 반영할 수 있는 도구로 인식되고 있다. 본 연구는 크게 한국군 전차병의 인체 CAD 모델의 설계와 설계된 인체 모델을 활용한 한국형 전차 작업공간 평가로 구성되었다. 한국 군 전차병의 인체 CAD 모델링에서는 전차병의 인체 측정자료를 이용하여 5%, 50%, 95%치 전차병 에 대한 선 자세와 앉은 자세의 인체 모델을 설계하였으며, 보다 정확한 인체 모델의 구현을 위 해인체의 기능적 치수에 대한 실측치와 CAD 설계치와의 차이를 비교, 보정하여 줌으로써 작업공 간 평가시 보다 정확한 결과를 얻을 수 있도록 하였다. 한국형 전차 작업공간 평가에서는 설계 된 인체 모델과 한국형 전차 주요 구성품의 CAD 모델을 활용하여 각 승무원의 작업역을 분석하였고, 승무원 해치, 주요 조종장치의 운용 적합성, 판넬류 등의 위치 적합성에 대해 분석, 평가하였다. 본 연구를 통해 무기체계를 대상으로 하여 CAD 프로그램을 이용한 Man-Machine Interface에 대한 검토가 이루어 졌으며, 기존의 도면이나, Mock-up, Prototype에 의존하던 작업공간 타당성 검토가 CAD를 이용하여 3차원적으로 이루어 질 수 있는 기반을 마련하였다는데 의의가 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.356-360
• /
• 2015

기존의 하천관리는 이 치수에 중점을 두었다면 최근에는 환경의 중요성을 인식하고 하천복원사업을 통해 주변환경을 개선하여 자연과 공존하는 방향으로 바뀌고 있다. 하천에 분포하는 다양한 종류의 식생은 지형변화, 유속 및 수위 변화 등 직 간접적으로 하천에 영향을 미치고 있다. 따라서 효과적인 하천관리를 위해서는 하천흐름에 대한 식생의 영향을 이해하고 분석하는 것이 필요하다. 본 연구에서는 다차원 수리 수질 통합분석이 가능한 EFDC모형을 이용하여 홍수터 식생에 의한 하천의 수리특성 변화를 모의하였다. 금강수계 공주보~백제보 구간에 대한 수치지도 및 수심측량 정보를 바탕으로 작성된 3차원 정밀지형도와 30~50 m 간격의 직교곡선격자망을 이용하여 지형을 구축하고, 홍수터 식생에 의한 흐름저항을 반영하기 위한 현장조사를 통해 작성된 식생분포지도를 토대로 교목류(Tree), 관목류(Shrub), 초본류(Herb), 수체(Water) 4가지로 구분하여 분포밀도, 흉고직경, 교목의 높이를 모형에 적용하였다. 2일 간의 보 운영조건에 따라 상류의 공주보 방류량과 하류의 백제보 수위를 경계조건으로 분석을 실시하고, 동일기간 61개 관측지점 중에서 상 중 하류 4개의 임의지점에 대하여 유속측정결과와 모의결과의 비교를 통해 모형을 검증하였다. 홍수터가 완전히 잠겨 식생의 영향을 크게 받는 고유량 조건에 대하여 식생의 적용 여부에 따른 수리특성 변화를 살펴본 결과 홍수터의 경우 일부구간에서 유속이 감소하였으나 인근 주수로의 유속은 증가하는 것으로 나타났다. 하천수위의 변화는 미미한 것으로 나타났다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.9
• /
• pp.1043-1048
• /
• 2014

As micro screws feature reduced screw lengths and pitches, the resulting clamping force diminishes because of the reduced length of the actual joints. The elements of the clamping force are material, geometry, and friction. We studied the shrinking size of the screw and the methods to improve the clamping force by changing the material. We developed a micro screw using SWCH18A and SUS XM7 materials, and obtained the precision and thickness of the pitch through three-dimensional measurement. We also measured the external resistance of the micro screw by applying the Vicker's hardness test and conducted a break surface analysis using a break torque test and SEM for obtaining the break characteristics.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.6
• /
• pp.938-948
• /
• 2009

The purpose of this study was to offer typical facial shapes Korean women in their 20's to 50's. We used facial photographs of 600 Korean women obtained from $2003\sim2004$ Size Korea Project and we measured these photographs indirectly in this study by utilizing the Venus face2D program. Total 62 measurements on the face were measured and analyzed by statistical methods. The results were as follows. First of all, the mean of face length was 196mm, top face length was 62.3mm, middle face length was 68.9mm, bottom face length was 66.5mm, mean of forehead width was 125.1mm. As based on those average sizes, we proposed a average facial size and shape of Korean women and a average facial size and shape of 20's, 30's, 40's and 50's in this study. When examined characteristic of 20's facial shape, it was recognized that the width of forehead was wider and the width of gnathion was smaller than other age groups. In the characteristic of 30's facial shape, the ratios of facial length, top of face, middle of face and bottom of face were balanced well, as comparing with other age groups. Overall, the values of facial measurement of 30's were similar to the averages of total women. In the facial shape of 40's, mean length and width of face each were the smallest among each age group. The eye shape of 40's was more drooped than the average eye shape and the protrusion of the zygomatic bone was significantly different. In case of the facial shape of 50's, it was similar to the facial shape of 40's, but mean lengths and widths of 50's face were slightly larger than the values of 40's. The eye shape of 50's was more drooped than average group and the eye length was the smallest among all age groups.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.2
• /
• pp.205-212
• /
• 2020

The purpose of this study is to evaluate the validity of primary anterior zirconia crown made with Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) technology by analyzing fracture strength and translucency parameter. Zirconia crown was designed with CAD software, using 3D scanned data of #61 tooth model. Crown fabrication was performed with CAM machine using zirconia block. Zirconia crowns were divided into 3 groups according to thickness(0.3, 0.5, and 0.7 mm), and fracture strength was compared with 1.0 mm thickness of resin strip crown. The compressive force was applied with universal testing machine at 30° along the incisal edge at increments of 1 mm/min. For translucency evaluation, 0.3, 0.5, and 0.7 mm thickness of zirconia specimens were fabricated and translucency was measured with spectrophotometer. Among zirconia groups, there was a significant increase in fracture strength as thickness increased (p < 0.05). The fracture strength of zirconia crown was significantly higher than resin strip crown in all groups (p < 0.05). Translucency parameter was highest in 0.3 mm group, and significantly decreased as thickness increased to 0.5 and 0.7 mm (p < 0.05). Thin primary anterior zirconia crown can be designed and fabricated according to individual needs by using CAD/CAM. Restoration with thin crown would reduce the amount of tooth reduction, risk of pulp exposure, and make more esthetic restoration possible.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.3
• /
• pp.45-54
• /
• 2000

The effect of electropolishing far stamped leadframe on the removal of the edge burr and residual stress relief was examined. The present study showed that the electropolishing could be used for enhanced surface quality of stamped leadframes. The electropolishing was performed at the condition of 60% phosphoric acid electrolyte, 5 ampere of current and 3 cm electrode gap at $70^{\circ}C$ for 2 minutes for Alloy42 type leadframe, and $50^{\circ}C$ for 1.5 minutes for C-194 type leadframe. The FWHM values from X-ray diffraction showed that residual stress of electropolished leadframe recovered to the level of as-received raw materials and surface roughness measured by using AFM tuned out to be improved by 0.079 $\mu\textrm{m}$ and 0.014 $\mu\textrm{m}$ ($R_{rms}$) far alloy 42 and C-194 type leadframes, respectively. The plated thickness using XRF showed the improved uniformity in thickness variation by 0.4~0.5 $\mu\textrm{m}$ and grain growth, which is favorable for interface adhesion, was also observed from the bake test samples. We could certify dimensional stability of leadframe with inspection by means of 3D-topography and hardness measurements.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.841-847
• /
• 2014

Urban runoff models have been continuously developing with concerns for urban flood. Recently, models that be able to quantitatively analyze surface inundation caused by overflowed water from storm sewer were also developed by coupling 1-dimensional sewer model and 2-dimensional surface flow model. However, only overflowed water from storm sewer can be analyzed by the models have been developed until now. They are limited to be not able to analyze surface inundation caused by surface runoff that could not flow into the storm sewer. In order to overcome the limitation, basin-overlap method was devised adding a dummy 1-dimensional sewer layer to the model, so it can consider the efficiency of inflow to the storm sewer system. XP-SWMM 2011 is applied for urban runoff model and the flood event occurred on July 27, 2011 in basin-shaped Sadangcheon watershed is chosen for study inundation event. According to simulation results basin-overlap method reappear the observed inundation event more precisely than traditional method. This results suggest that drainage system has to be improved for reducing inundation caused by surface runoff and would be used as considerations for planning an urban basin design magnitude.

• Fashion & Textile Research Journal
• /
• v.1 no.3
• /
• pp.252-258
• /
• 1999

The aims of this study is to classify the lower somatotype of adult women and appearance analysis on the shape of flare skirts by using the image processing. Also We have made skirts in order to analyze the various types of appearance of flare skirts by using the image processing. The subjects for our wear test lower somatotype, who were controlled in their waist, abdomen and hip shapes. The flare skirts used for wear test were 112 types(combinated 14 fabric type and 8 lower somatotype). The effect of lower somatotype on the shape of flare skirts was determined by the horizontally hem line section shape and the silhouette of flare skirts with image processing. The data were analyzed by using analysis of variance and Turkey, Duncan multiple range test. The results obtained are summarized as follows: It is shown that the fabric weight elongation differs in fabrics properties, in direction of textures. The shape horizontal section of flare skirt hem line has differed with the number of nodes, wave-height of nodes and breadth of silhouette by fabrics properties and lower somatotype. It is noticed that the breadth of flare skirts by the silhouette has high correlation with the drape ability of fabrics and lower somatotype. Results for our flare skirts show changes in amplitude and mean with fabrics, somatotype. Therefore we can say that gray-level histograms are correlated with changes in appearance, differences in drape spacing and related fabric properties and their somatotype.

• Archives of design research
• /
• v.14
• /
• pp.1-7
• /
• 1996

Designers often hesitate to decide the shape, size, and layout of a product. Though ergonomic principles and data are absolutely needed in this process, they don have enough guidelines to refer. For the refrigerator designers, they also are not convinced of their decision: the vertical position of the freezing and refrigerating rooms, the height of shelves, the shape of door-handle, etc. To support the refrigerator design, we applied several ergonomic methods to the evaluation of refrigerator. EMG was measured to evaluate the load of users lumbar muscle. Based upon the experimental EMG data, we developed a model to estimate the relative load corresponding to the height of refrigerator shelves. Two different layouts of a refrigerator, R/F and F/R styles, were compared with the model. A three-dimensional motion analysis method was used to evaluate the users motion of using a refrigerator. Ten door-handles with the different shapes and positions were evaluated by tracking the rotations of the users arm. Video protocol analysis was used to evaluate the user interface of a control panel in a refrigerator. Finally, we suggested several ergonomic design guidelines based on the facts found in this research and the anthropometric data of the Korean adults. The results of this study can be applied to the ergonomic design of refrigerators