• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2006.06a
• /
• pp.5-8
• /
• 2006

본 논문에서는 3차원 좌표를 얻을 수 있는 카메라 Calibration 알고리듬을 확립하고, View Frustum(V.F.) 모델을 이용하여 도로의 영상을 모델화하였다. 그리고 주행하는 차선 내에 존재하는 선행차량의 위치측정 및 차량까지의 거리를 정확히 인식하기 위해 피칭오차를 보정하며 실시간으로 계측하는 알고리듬을 제안하였다. 기존의 많은 추돌 경보시스템(CWS)들은 도로가 평면이라 가정하여 도로와 차량사이의 기하적인 변화에 따른 오차 특성을 고려하지 않았다. 이를 보완하고자 본 논문에서는 카메라 Calibration 알고리듬을 적용하여 실세계 좌표계와 영상좌표계 사이의 기하해석으로 사영행렬을 추출하였고, V.F. 모델을 이용하여 소실점의 기하적인 해석을 통하여 차량의 피칭변화에 따른 오차특성을 실시간으로 보정하였다. 실험결과 거리의 오차를 2%이하로 줄일 수 있어 피칭변화에 강인함을 확인할 수 있었다.

• Journal of Game and Entertainment
• /
• v.2 no.1
• /
• pp.35-44
• /
• 2006

Objective of this study is to develop a 3D car navigation system that shows the driving direction to a destination through real-time 3-D panoramic views of the route. For the purpose, a new searching process was established to find the optimal driving direction based on the driver's current location and the real-time traffic situation and the TIP (tour into the picture) method was extended to implement a wide virtual environment. A virtual environment was built up by applying the extended TIP method to the panoramic images taken at a constant distance from a real road, and then, displayed 3-D navigation as clear as the real images. The car navigation system developed in this study provides the optimal driving direction and real-time traffic situation using 2-D navigation module and 3D navigation module.

• Journal of Broadcast Engineering
• /
• v.28 no.3
• /
• pp.329-332
• /
• 2023

3D Object Detection using deep neural network has been developed a lot for obstacle detection in autonomous vehicles because it can recognize not only the class of target object but also the distance from the object. But in the case of 3D Object Detection models, the detection performance for distant objects is lower than that for nearby objects, which is a critical issue for autonomous vehicles. In this paper, we introduce a technique that increases the performance of 3D object detection models, particularly in recognizing distant objects, by generating virtual 3D vehicle data and adding it to the dataset used for model training. We used a spherical point tracing method that leverages the characteristics of 3D LiDAR sensor data to create virtual vehicles that closely resemble real ones, and we demonstrated the validity of the virtual data by using it to improve recognition performance for objects at all distances in model training.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.162-171
• /
• 2012

In this study, a new dynamic interaction analysis method for tilting trains and curved track is presented. Three dimensional lumped parameter vehicle elements are used to model tilting train, and the proposed analysis technique can simulate driving direction change of vehicle, the effect of track cant, wheel-rail contact angle, and tilting angle of tilting trains, etc. The proposed method passed several basic verification tests, and it is expected that the suggested method is applicable for practical problems.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.6
• /
• pp.711-720
• /
• 2002

A 3-D numerical model, which could demonstrate the static and dynamic responses of a curved bridge more precisely with the moving vehicles, was developed The dynamic response induced by the centrifugal rolling motion of vehicle was identified according to the variations of the partial grade and the curvature of the slab. Dynamic characteristics of the curved bridge with the moving vehicle were analyzed under the condition of support types and two different support systems. Parametric studies were conducted to compare the efficiency of load distribution in the curved bridge. In general, while the vehicle was crossing the curved bridge, negative reaction occurred in the inside of the girder. The final result showed that the support system located outside the girder was more advantageous than other systems, and the characteristics of load distributions differed from the others in the various conditions of support systems.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.3
• /
• pp.108-115
• /
• 2006

In this paper, a recognition algorithm of the straight line components of lane markings and an obstacle in the travelling lane region is proposed. This algorithm also involve the pitching error correction algorithm due to traveling vehicle's fluctuation. In order to reduce their error a practical road image modelling algorithm using V.F. model and camera calibration procedure are suggested to adapt the geometric variations. It is obtained the 3D world coordinate data by the 2D road images. In experimental test, we showed that this algorithm is available to recognize lane markings and an obstacle in the traveling lane.

• International Journal of Highway Engineering
• /
• v.7 no.4 s.26
• /
• pp.185-202
• /
• 2005

In this research, to get over restrictions of a field expreiment, we modeled a planning road through the 3D Virtual Reality and achieved data about dynamic response related to sector fluctuation and about driver's visual behavior on testers' driving the Driving Simulator Car with Eye Camera. We made constant efforts to reduce the non-reality and side effect of Driving Simulator on maximizing the accord between motion reproduction and virtual reality based on data Driving Simulator's graphic module achieved by dynamic analysis module. Moreover, we achieved data of driver's natural visual behavior using Eye Camera(FaceLAB) that is able to make an expriment without such attaching equipments such as a helmet and lense. In this paper, to evaluate the level of road's safety, we grasp the meaning of the fluctuation of safety that drivers feel according to change of road geometric structure with methods of Driving Simulator and Eye Camera and investigate the relationship between road geometric structure and safety level. Through this process, we suggest the method to evaluate the road making drivers comfortable and pleasant from planning schemes.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.5
• /
• pp.717-732
• /
• 2017

Recently, the construction of underground structure such as a double-deck tunnel is increasing to manage rapid growth of roadway traffic volume. Double-deck tunnel includes middle slab to separate upper and lower road inside, and various sources affect the dynamic behaviour of middle slab due to dynamic loading of vehicle. Therefore, it is important to investigate the dynamic response of middle slab precisely to apply it to design and analysis of double-deck tunnel. In this study, dynamic analysis model of middle slab considering structural type, design velocity, vehicle load, and surface roughness, etc. is built. 3-dimensional dynamic analysis is performed to assess dynamic response of middle slab. Consequently, Dynamic Magnification Factor which represents dynamic response of middle slab shows maximum in case of elastomeric bearings (EB) and average roughness (Grade C). It is also expected that dynamic response can be reduced under the condition of good roughness (Grade B) and fixed bearings (FB).

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.4
• /
• pp.136-147
• /
• 2021

Autonomous driving-related technologies are developing step by step by applying the degree of driving. It is essential that operational management technology for roads where autonomous vehicles move should also develop in line with autonomous driving technology. However, in the case of road operation management, it is currently managed using only two-dimensional information, showing limitations in the systematic operation management of lane and facility information and maintenance. This study proposed a plan to construct an operation management system architecture capable of 3D spatial information-based operation management by designing a convergence database that can process real-time big data with high-definition road map data. Through this study, when using a high-definition road map based operation management system for lane and facility maintenance in the future, it is possible to visualize and manage facilities, edit and analyze data of multiple users, link various GIS S/W and efficiently process large scale of real-time data.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.3
• /
• pp.97-108
• /
• 1995

A 3-dimensional double track vehicle model, that has 12-degress-of-freedom, was proposed to analyze handling and riding behaviours of an automotive car. Nonlinear characteristics of the suspension and steering systems of the vehicle model were considered in its equations of motion, which were solved by using the 4th-order Runge-Kutta integration method. Computer simulations for lane change, steady-state handling, and running-over-bump manoeuvres were made and verified by vehicle tests on proving ground. The computed results of the proposed model showed better agreement with test results than those of the conventional 2-dimensional single track model did. Especially they showed good accuracy near the characteristic speed and in high lateral accelerated manoeuvres.