• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.1-11
• /
• 2023

This study intended to develop a technique for quantitatively and 3-dimensionally predicting the potential failure zone and impulse that may occur when trees are fall down. The main outcomes of this study are as follows. First, this study established the potential failure zone and impulse calculation formula in order to quantitatively calculate the risks generated when trees are fallen down. When estimating the potential failure zone, the calculation was performed by magnifying the height of trees by 1.5 times, reflecting the likelihood of trees falling down and slipping. With regard to the slope of a tree, the range of 360° centered on the root collar was set in the case of trees that grow upright and the range of 180° from the inclined direction was set in the case of trees that grow inclined. The angular momentum was calculated by reflecting the rotational motion from the root collar when the trees fell down, and the impulse was calculated by converting it into the linear momentum. Second, the program to calculate a potential failure zone and impulse was developed using Rhino3D and Grasshopper. This study created the 3-dimensional models of the shapes for topography, buildings, and trees using the Rhino3D, thereby connecting them to Grasshopper to construct the spatial information. The algorithm was programmed using the calculation formula in the stage of risk calculation. This calculation considered the information on the trees' growth such as the height, inclination, and weight of trees and the surrounding environment including adjacent trees, damage targets, and analysis ranges. In the stage of risk inquiry, the calculation results were visualized into a three-dimensional model by summarizing them. For instance, the risk degrees were classified into various colors to efficiently determine the dangerous trees and dangerous areas.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.4
• /
• pp.77-87
• /
• 2004

It is important for hydrographers to extract the accurate cross section of a river for the hydrographical analysis of the topography. Aerial photographs were used to extract the cross section of a river for the advantages of the accuracy and economical efficiency in this study, while the direct measurement has been used in existing studies. An ortho-rectified photo map using imageries taken by the PKNU 2 (High-resolution, multi-spectral, aerial photographic system developed by our laboratory) was generated using the surveyed data and a digital map. The cross section of a river that was obtained from the ortho-rectified by the surveyed Kinematic data of GPS was compared with the result using ImageStation stereo-plotter of corp. Z/I Imaging. As a result of this study, the RMSE in the ortho-rect process using the surveyed GPS data was lowered as from 5.5788 pixels (about 2m) to 2.84 (about 1m) in comparison with it in the process using a digital map. The surveyed kinematic GPS in extraction of the cross section of a river was excellent as 6.6cm of the planimetric and precision in the confidence level of 95%. The correlation coefficient between the result from the using stereo-plotter and the extraction of cross section of a river using aerial photos was 0.8 hydrographical acquisition of it using PKNU 2 imagery will be possible.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.1
• /
• pp.68-82
• /
• 2017

Strengthening surveillance, one of the most important factors in the crime prevention environment of cultural heritages, has difficulty in evaluating and diagnosing the site. For this reasons, surveillance enhancement has been assessed by modelling the shape of cultural heritage, topography, and trees digitally. The purpose of this study is to develop the evaluation method of crime prevention environment for cultural heritage by using the 3D visual exposure index (3DVE) which can quantitatively evaluate the surveillance enhancement in three dimensions. For the study, the evaluation factors were divided into natural, organizational, mechanical, and integrated surveillance. To conduct the analysis, the buildings, terrain, walls, and trees of the study site were modeled in three dimensions and the analysis program was developed by using the Unity 3D. Considering the working area of the person, it is possible to analyze the surveillance point by dividing it into the head and the waist position. In order to verify the feasibility of the 3DVE as the analysis program, we assessed the crime prevention environment by digitally modeling the Donam Seowon(Historic Site No. 383) located in Nonsan. As a result of the study, it was possible to figure out the problems of patrol circulation, the blind spot, and the weak point in natural, mechanical, and organizational surveillance of Donam Seowon. The results of the 3DVE were displayed in 3D drawings, so that the position and object could be identified clearly. Surveillance during the daytime is higher in the order of natural, mechanical, and organizational surveillance, while surveillance during the night is higher in the order of organizational, mechanical, and natural surveillance. The more the position of the work area becomes low, the more it is easy to be shielded, so it is necessary to evaluate the waist position. It is possible to find out and display the blind spot by calculating the surveillance range according to the specification, installation location and height of CCTV. Organizational surveillance, which has been found to be complementary to mechanical surveillance, needs to be analyzed at the vulnerable time when crime might happen. Furthermore, it is note that the analysis of integrated surveillance can be effective in examining security light, CCTV, patrol circulation, and other factors. This study was able to diagnose the crime prevention environment by simulating the actual situation. Based on this study, consecutive researches should be conducted to evaluate and compare alternatives to design the crime prevention environment.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.117-125
• /
• 2014

Korea's first X-band SAR satellite KOMPSAT-5 has been launched in 2013, so the research related to the X-band SAR satellite image is required to increase the utilization of KOMPSAT-5. In this study, we generated a DEM(Digital Elevation Model) using X-band SAR satellite images based on three methods which are InSAR, radargrammetry and RPC(Rational Polynomial Coefficients), and evaluated the performance of each methods. The four stripmap mode TerraSAR-X images taken in Daejeon were used to generate DEM, and accuracy was evaluated using DEM by IKONOS RPC. As results, DEM produced by the InSAR showed the highest accuracy. Also, we knew that RPC could be effective method if you want to create a large area DEM which contains the various elevation.

• 한국지형공간정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.73-80
• /
• 2002

RFM is believed to be universally applicable to any type of the sensor. Most of researches carried out lately are concentrated on terrain-independent method, but the researches about approvement of accuracy by way of terrain-dependent method are required to increase a practical use of satellite imagery in nonprofessional groups. This research focused on a means to improve RFM solution, a matching technique, and a generation of DEM through a correlation analysis, with terrain-dependent solution. The result shows that accuracy problem which is caused by over-parameterization on RFCs was removed through correlation analysis, and it was possible to generate a accurate DEM with terrain-dependent solution. And also, the application of RFM with different satellite images show sensor independent characteristics of RFM

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.3
• /
• pp.61-74
• /
• 2016

The purpose of this paper is to analyze the relationship between the location of the epicenter of a medium-sized earthquake(magnitude 4.8) that occurred on January 20, 2007 in the Odaesan area with lineament features using a shaded relief map(1/25,000 scale) and satellite images from LANDSAT-8 and KOMPSAT-2. Previous studies have analyzed lineament features in tectonic settings primarily by examining two-dimensional satellite images and shaded relief maps. These methods, however, limit the application of the visual interpretation of relief features long considered as the major component of lineament extraction. To overcome some existing limitations of two-dimensional images, this study examined three-dimensional images, produced from a Digital Elevation Model and drainage network map, for lineament extraction. This approach reduces mapping errors introduced by visual interpretation. In addition, spline interpolation was conducted to produce density maps of lineament frequency, intersection, and length required to estimate the density of lineament at the epicenter of the earthquake. An algorithm was developed to compute the Value of the Relative Density(VRD) representing the relative density of lineament from the map. The VRD is the lineament density of each map grid divided by the maximum density value from the map. As such, it is a quantified value that indicates the concentration level of the lineament density across the area impacted by the earthquake. Using this algorithm, the VRD calculated at the earthquake epicenter using the lineament's frequency, intersection, and length density maps ranged from approximately 0.60(min) to 0.90(max). However, because there were differences in mapped images such as those for solar altitude and azimuth, the mean of VRD was used rather than those categorized by the images. The results show that the average frequency of VRD was approximately 0.85, which was 21% higher than the intersection and length of VRD, demonstrating the close relationship that exists between lineament and the epicenter. Therefore, it is concluded that the density map analysis described in this study, based on lineament extraction, is valid and can be used as a primary data analysis tool for earthquake research in the future.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.4
• /
• pp.97-110
• /
• 2007

A laser scanning technique has been attracting much attention as a new technology to acquire location information. This technique might be applicable to a wide range of areas, most notably in geomatics, due to its high accuracy of location and automation of high-density data acquisition. A alignment information extraction system on highway has been developed in this study by utilizing the advantages of the laser scanning technique. The system can accurately interpret the alignment information of highway and can be applied to actual works. To develop the alignment information extraction system on highway, an algorithm that can automatically separate a horizontal alignment into a straight line, a transition curve, and a circular curve was developed. It can increase its efficiency compared to the conventional methods. In addition, an algorithm that can automatically extract design elements of horizontal and vertical alignments of highway was developed and applied to an object highway. This yielded higher practicality with more accurate values compared to those from previous studies on the extraction of design elements of highway alignment. Furthermore, the extracted design elements were used to perform a virtual driving simulation on the object highway. Through this, data were provided for a visual judgment for judging visually whether the topography and structures were harmonized in a three-dimensional manner or not. The study also presents data that can serve as a basis to determine highway surface freezing sections and to analyze three-dimensional sight distance models. Through the establishment of a systematic database for diverse data on highway and the development of web-based operating programs, an efficient highway maintenance can be ensured and also they can provide important information to be used when estimating a highway safety in the future.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.3
• /
• pp.14-26
• /
• 2018

The Biotope Area Ratio (BAR) is a quantitative pre-planning index for sustainable development and an integrated indicator for the balanced development of buildings and outdoor spaces. However, it has been pointed out that there are problems in operations management: errors in area calculation, insufficiency in the underground soil condition and depth, reduction in biotope area after construction, and functional failure as a pre-planning index. To address these problems, this study proposes implementing LIM. Since the weights of the BAR are mainly decided by the underground soil condition and depth with land cover types, the study focused on the terrain and pavements. The model should conform to BIM guidelines and standards provided by government agencies and professional organizations. Thus, the scope and Level Of Detail (LOD) of the model were defined, and the method to build a model with BIM software was developed. An apartment complex on sloping ground was selected as a case study, a 3D terrain modeled, paving libraries created with property information on the BAR, and a LIM model completed for the site. Then the BAR was calculated and construction documents were created with the BAR table and pavement details. As results of the study, it was found that the application of the criteria on the BAR and calculation became accurate, and the efficiency of design tasks was improved by LIM. It also enabled the performance of evidence-based design on the terrain and underground structures. To adopt LIM, it is necessary to create and distribute LIM library manuals or templates, and build library content that comply with KBIMS standards. The government policy must also have practitioners submit BIM models in the certification system. Since it is expected that the criteria on planting types in the BAR will be expanded, further research is needed to build and utilize the information model for planting materials.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.212-240
• /
• 2022

This study is a multi-layered exploration of 「The Thirty-Six Scenery of Seongdeok Summer Mountain Resort(承德避暑山莊三十六景)」 (The 36th view of Kangxi) recited by Emperor Kangxi of China through literature study, ancient calligraphy diagrams, and field studies. The conclusion of tracing the landscape characteristics and implications contained in 「The 36th view of Kangxi」 through the analysis of the headword(標題語) and the interpretation of the Jeyeong poem(題詠詩) is as follows. 「The 36th view of Kangxi」 is an extension of the outer edge of the Eight Sceneries, and when compared to the existing Eight Sceneries peom and Eight Sceneries painting, it is found that the landscape is centered on the 'viewpoint' rather than the landscape object. In particular, it aimed to create a structured landscape centered on nine types of buildings represented by 'Jeon(殿)' and 'Jeong(亭)' was given. In particular, Yeouiju, located in Lake district, is a scenic country endowed with the character of a gardens in Garden, which is composed by collecting famous representative Chinese landscapes and landscapes of Sansu-si and Sanshu Painting. As a result of headword analysis to understand the characteristics of landscape components, 14 landscapes (38.9%) related to water elements and 13 landscapes(36.1%) related to mountain elements, the elements related to architecture and civil engineering were classified in the order of 3 cases(8.3%), and the elements related to the skylight were classified in the order of 2 cases(5.6%). However, in Jeyeong-si, the mention of landscape vocabulary for climate elements was overwhelming. In other words, in the poems of 「The 36th Scenery of Kangxi」, scenery vocabulary symbolizing 'coolness' such as 雲(cloud), 水(water), 泉(spring), 清(clear), 波(wave), 流(wave), 風(wind) and 無暑(without heat), etc. It is not a coincidence that it appears, and it is strongly attached to the sense of place of Summer Mountain Resort in Rehe(熱河). Among the 23 landscapes whose seasonal background was confirmed, the fact that the lower landscape is portrayed as the majority and the climate elements of the resort area are portrayed in three-dimensional and multi-dimensional ways are closely related to the period of enjoying the gardens of Kangxi, the main subject of the landscape. In addition, many animal and plant landscapes appearing in Jeyeong-si appear to be in the same context as the spatial attributes of not only recreation, but also contemplation and hunting. On the other hand, in Jeyeongsi, there are 33 wonders(91.7%) citing famous people and famous books through ancient poems, old stories, and ancient stories tends to be prominent. It is inferred that this was based on Kangxi's understanding and pride in traditional Chinese culture. In 「The 36th view of Kangxi」, not only a book-writing description of the feelings of being entrusted to the family sutras, but also the spirit of patriotism, love, self-discipline and respect for mother and filial piety are strongly implied. Ultimately, 「The 36th view of Kangxi」 shows the real scene of the resort, as well as the spiritual dimension, in a multi-faceted and three-dimensional way, and the spirit of an emperor based on the dignity of the royal family and the sentiments of a writer it deserves to be called a collection of imperial records that were intended to reveal.