• Title/Summary/Keyword: 3차원 공진 모드

Search Result 23, Processing Time 0.023 seconds

Modal characteristics of a stick resonator in a two-dimensional photonic crystal slab (2차원 광결정 박막위에 제작된 막대형 공진기의 모드 특성)

  • 김세헌;김국현;권순홍;김선경;이용희
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2003.07a
    • /
    • pp.224-225
    • /
    • 2003
  • 이 연구에서는 광결정 (photonic crystal) 박막 (slab) 위에 제작된 막대형 공진기의 공진모드의 특성을 보고한다. 먼저 3차원 FDTD 방법을 이용하여 각각의 공진 모드들의 모드 형태, 공진주파수, 품위값(Q factor) 등을 구하였다. 광결정 격자의 주기가 $\alpha$ 일 때, 슬랩의 두께는 0.4 $\alpha$ , 구멍의 반지름은 0.35 $\alpha$ 로 하였다. 슬랩의 굴절률 (n) 은 실험에서 사용한 InP의 1.55 $\mu$m 에서의 굴절률 값인 3.4 로 정하였다. (중략)

  • PDF

Resonant Mode Analysis of Microwave Film Bulk Acoustic Wave Resonator using 3D Finite Element Method (3차원 유한 요소법을 이용한 초고주파 압전 박막 공진기의 공진 모드해석)

  • 정재호;송영민;이용현;이정희;고광식;최현철
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.12 no.1
    • /
    • pp.18-26
    • /
    • 2001
  • In this paper, the resonant characteristics and modes of the film bulk acoustic wave resonator (FBAR) used in 1~2 GHz frequency region are analyzed by it's input impedance which was calculated by three dimensional finite element method formulated as eigenvalue problem using electro-mechanical wave equation and boundary condition. It was extracted that the resonant and the spurious characteristics considering the effects of electrode area and shape variation and unsymmetry of upper and lower electrode. Those effects couldn't be analyzed by on dimensional analysis, e.g. Mason equivalent model. The simulation result was confirmed by comparing with the simulation data from Mason model analysis and the measured data of the ZnO FBAR fabricated using micro-machining technique. Also, through the simulation of the area variations of FBAR, it was obtained that the optimum ratio of length and thickness is 20:1 and the minimum ratio is 5:1 to operate thickness vibration mode.

  • PDF

Resonance Characteristics for 3-Dimensional Circular Wind Tunnel (3차원 원형 풍동의 공진 특성)

  • Baik, Ki-Young;Lee, In;Shin, Hyun-Dong
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.14 no.5
    • /
    • pp.1096-1103
    • /
    • 1990
  • A finite element method is used for analyzing the resonant characteristics of three- dimensional wind tunnel with circular cross section. The resonant frequencies of wind tunnel is nearly constant in Mach number range of 0.0-0.2. The resonant frequencies and modes of three-dimensional low speed wind tunnel have been calculated. The 20-node isoparametric element gives accurate results compared with the experimental results.

Compact Triple-Mode Bandpass Filter Using a Cylindrical Dielectric Resonator (원통형 삼중모드 유전체 공진기를 이용한 대역 통과 여파기의 설계)

  • Jang, Geon-Ho;Park, Nam-Shin;Kim, Byung-Chul;Lee, Don-Yong;Won, Jung-Hee;Wang, Xu-Guang
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.26 no.1
    • /
    • pp.30-38
    • /
    • 2015
  • In this paper, the design of a compact triple-mode bandpass filter using a high-Q cylindrical dielectric resonator is proposed. In detail, the triple $TE_{01{\delta}}$ modes along three orthogonal axes are used and novel coupling structure in the metallic enclosure is adopted to introduce the coupling between the resonant modes. Due to the cross coupling, the proposed bandpass filter has an asymmetric frequency response with flexible three transmission zeros, one of which can be located very close to the passband edge to provide an extremely sharp skirt characteristic with low insertion loss. The proposed filter is about 60 % miniaturized compared with conventional single-mode dielectric resonator filter. The proposed bandpass filter design is validated by the circuit and 3D EM simulations and measurements compared to the target specifications.

Computational Study on Resonant Characteristics of Industrial High-Power Magnetron Oscillators (산업용 고출력 마그네트론의 공진 특성 연구)

  • Jung, Sun-Shin;Wo, Jong-Hyo
    • Proceedings of the KIEE Conference
    • /
    • 2006.10a
    • /
    • pp.127-128
    • /
    • 2006
  • 고출력 마그네트른 발진기는 마이크로파 발생원으로서 식품, 고무, 섬유, 목재, 세라믹, 폐기물 등의 다양한 산엄적 프로세스에 응용된다. 여러 가지 새로운 마이크로파 응응분야들이 보고되고 있을 뿐만 아니라 계속 연구되고 있다. 본 연구에서는 3차원 전자기장 해석용 시뮬레이션 코드를 이용하여 이중 스트랩형 고출력 마그네트론을 모델링하였다. 본 논문에서는 마그네트론의 공진모드, 공진주파수 능의 공진 특성 결과가 제시될 것이다.

  • PDF

Room-temperature 2-D PBG laser employing wafer fusion (기판 융용 접합을 이용한 상온동작 2차원 광밴드갭 레이저)

  • 황정기;류한열;송대성;한일영;이용희;장동훈
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2000.02a
    • /
    • pp.274-275
    • /
    • 2000
  • 광결정(photonic crystal)으로 광원의 자발 방출을 조절하면 문턱전류 없는 레이저, 고효율 다이오드, 파장 크기에서 손실 없이 급격히 꺾을 수 있는 광도파로 등 기존의 광소자에서 얻을 수 없는 좋은 성능을 얻을 수 있을 것으로 예상된다. 이러한 광결정은 유전체를 파장정도 크기에서 주기적으로 배치시킨 인공적인 결정인데 고체에서 원자의 주기적인 배치로 전자가 전파할 수 없는 진동수 영역, 즉 밴드갭이 생기는 것과 유사하게 빛에 대해서 빛이 전파할 수 없는 진동수 영역인 광밴드갭(photonic bandgap)을 가진다. 그런데 관심있는 광영역에서 3차원 모든 방향으로 광밴드갭이 있는 구조물은 마이크로미터보다 작은 내부 구조를 가지는 복잡한 3차원 구조물로 제작이 어렵다. 이러한 어려움을 극복하기 위해 제작이 비교적 용이한 3차원 광밴드갭 구조물이 찾아지고 있다. 다른 접근 방법으로 평면(x-y)에서는 2차원 광밴드갭을 이용하고 제 3의 방향(z축)으로는 전반사를 이용하는 구조는 제작이 용이할 뿐만 아니라 처음부터 광원의 편광을 TE 또는 TM 모드로만 방출 되도록 준비해 줄 수 있으면 거의 3차원 광결정에서 얻을 수 있는 효과를 낼 수 있는 것으로 발표되었다.$^{(1)}$ 이 방법을 이용하여 최근에 미국의 캘리포니아 공과대학(Caltech)을 중심으로 레이저 동작을 보여 주었다.$^{(2.3)}$ 공기로 둘러싸인 얇은 유전체 평판에서 생기는 전반사와 평판 위에 2차원 삼각형살창(triangular lattice)에 구멍을 뚫어 얻는 2차원 광밴드갭을 이용해 3차원 공진모드를 형성하였다. 이러한 구조에서 1개만 구멍을 매워서 만든 공진기는 저온(143 K)에서 레이저 발진을 보였고 여러 개의 구멍을 매운 경우는 상온에서 펌프 펄스의 유지시간이 0.5% 인 경우 레이저가 동작하는 것을 보여주었다. 이는 구조내에서 열전도가 문제가 된다는 것을 의미하는데 위아래가 공기로 둘러 싸여 있어 발생한 열이 가는 유전체 네트웍을 통해서만 전달 될 수 있기 때문이다. (중략)

  • PDF

Design and Analysis of Micro-positioning Actuator using Three Dimensional Finite Element Method (3차원 유한요소법을 이용한 Micro positioning actuator의 설계 및 해석)

  • Oh, Kwang-Il;Rho, Jong-Seok;Jung, Hyun-Kyo
    • Proceedings of the KIEE Conference
    • /
    • 2005.04a
    • /
    • pp.64-66
    • /
    • 2005
  • 본 논문에서는 압전체의 타원 운동을 이용한 선형 Micro-Positioning Actuator(MPA)에 대한 설계 및 해석 기법을 제안하였다. 또한 MPA의 해석을 위해 3차원 압전체의 유한요소의 정식화를 통한 유한요소 해석기법의 검증을 수행하였다. 검증된 3차원 유한요소 해석을 이용하여 MPA의 공진 특성 즉 impedance, 모드, 그리고 타원운동 해석을 하였다. 마지막으로 제안된 해석기법을 이용하여 기계 시스템을 고려한 MPA의 최종 설계를 하였다.

  • PDF

Analysis of a Microstrip Substrate-Mounted Dielectric Resonator using FDTD Method and Pade Approximation (FDTD법과 Pade 근사법을 이용한 마이크로 스트립 기판 위의 유전체 공진기 해석)

  • 오순수
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.37 no.6
    • /
    • pp.396-396
    • /
    • 2000
  • Three-Dimensional FDTD method is applied to analyze the dielectric resonator coupled with two microstrip lines. We model accurately the curved surface using Noriaki model. The frequency resolution is 106.46 MHz by the conventional FFT However it is not sufficient for determining its resonant frequency. So we introduce the Pad approximation and Stoer-Bulirsch method in order to have the high frequency resolution degree, 1.00 MHz. All results are compared with the measured data. As a result, we acquire the very precise result through the Pad approximation. And sinusoidal wave is applied. From the plot of the electric and magnetic field distribution, it is shown that the resonant mode is $TE_{01{\delta}}$ mode.

Analysis of a Microstrip Substrate-Mounted Dielectric Resonator using FDTD Method and Pad Approximation (FDTD 법과 Pad 근사법을 이용한 마이크로 스트립 기판 위의 유전체 공진기 해석)

  • O, Sun-Su;Yun, Jung-Han;Lee, Seong-Mo;Park, Hyo-Dal
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.37 no.6
    • /
    • pp.36-43
    • /
    • 2000
  • Three-Dimensional FDTD method is applied to analyze the dielectric resonator coupled with two microstrip lines. We model accurately the curved surface using Noriaki model. The frequency resolution is 106.46 MHz by the conventional FFT However it is not sufficient for determining its resonant frequency. So we introduce the Pad approximation and Stoer-Bulirsch method in order to have the high frequency resolution degree, 1.00 MHz. All results are compared with the measured data. As a result, we acquire the very precise result through the Pad approximation. And sinusoidal wave is applied. From the plot of the electric and magnetic field distribution, it is shown that the resonant mode is TE$_{01{\delta}}$ mode.

  • PDF

Nondegenerate Monopole Mode of Single Cell Two-dimensional Triangular Photonic Band Gap Cavity (2차원 단일 셀 삼각형 광결정 공진기에서의 비축퇴된 홀극 모드에 관한 연구)

  • Heo, Jun;Hwang, Jung-Ki;Lee, Yong-Hee
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2001.02a
    • /
    • pp.16-17
    • /
    • 2001
  • 광결정(photonic crystal)은 서로 다른 유전체가 규칙적으로 배열되어 있는 구조로서, 빛이 진행할 수 없는 진동수 영역인 광밴드갭(photonic bandgap)이 존재한다. 광밴드갭 특성으로 빛의 자발 방출과 진행 방향이 조절될 수 있기 때문에, 광결정은 나노 레이저, 광도파관, LED(Light Emitting Diode) 등의 광소자 개발에 응용되고 있다. 지금까지 2차원, 3차원의 광결정에 대한 많은 연구가 수행되어 왔으며, 현재에는 2차원의 슬랩(slab) 구조에 대해 활발하게 연구되고 있다. (중략)

  • PDF