• Computational Structural Engineering
• /
• v.11 no.3
• /
• pp.253-262
• /
• 1998

본 연구에서는 경부고속철도의 주요 교량형식인 PSC 박스교량을 3차원 뼈대요소를 사용하여 모형화하였으며, 궤도불규칙성의 형상은 지수 스펙트럴 밀도함수를 사용하여 생성시켰다. 경부고속철도차량(K-TGV)중 동력차는 17자유도의 3차원 주행열차로 모형화하였고, 이러한 교량, 궤도불규칙성 및 차량 모형을 이용하여 교량과 차량의 상호작용을 해석할 수 있는 프로그램을 개발하였다. 동적해석을 위한 교량과 차량의 운동방정식은 Lagrange 방정식을 사용하여 유도하였으며, 운동방정식의 수치해석에는 Newmark-β법을 사용하였다. 개발된 프로그램을 이용하여 동력차의 주행에 의한 교량의 시간이력곡선을 구하였으며, 궤도불규칙성의 영향을 분석하였다. 또한 도상의 유무에 따른 교량동적거동의 특성과 함께 열하중의 편심의 영향도 분석하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04b
• /
• pp.670-672
• /
• 2000

본 논문에서는 단일광자방출 전산화단층촬영영상 (SPECT)을 이용하여 좌심실의 내.외벽의 운동을 분리하여 추적하는 방법을 제시한다. 좌심실의 운동은 크게 평행이동, 회전이동, 비강체 변형으로 나뉘어 분석된다. 운동 추적을 위해 사용된 역동적 변형 솔리드는 물체중심 변동 좌표계로써 특징점들의 모드형태벡터를 사용하고, 좌심실 역동성을 유한요소방법에 의해 시뮬레이션한다. 또한, 변형 모델에 대해 묵시적으로 표준화된 parameterization을 하지 않고, 의료영상으로부터 얻은 자료값을 직접 이용하기 위해 노드간 보간함수로써 3차원 가우시안 함수를 사용한다. 그리하여 보다 자연스러운 방식으로 연속적으로 변화하는 좌심실의 운동을 추적할 수 있다. 이러한 분리된 내.외벽 운동 분석은 운동 기능에 이상이 있는 심질환 분석을 보다 효과적으로 도울 수 있다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.1
• /
• pp.61-67
• /
• 1985

The new computer vision system which can reconstruct contours of parallel fault planes with horizon of 3-D curved objects has been developed. With the system, the shape of 3-D objects was measured by Simple Back-Projection algorithm which is a fundamental one in C.T.(Computed Tomography). And, the curvature in differential geometry characterizes any curve. Devising it, the method to represent each contour of 3-D curved objects with the system is described in this paper.

• The Korean Journal of Applied Statistics
• /
• v.31 no.3
• /
• pp.353-366
• /
• 2018

This study uses mixed-effects models to predict thigh soft tissue artefact (STA), relative movement of soft tissue such as skin to femur occurring during hip joint motions. The random effects in the model were defined as STA and the fixed effects in the model were considered as skeletal motion. Five male subjects without musculoskeletal disease were selected to perform various hip joint rotational motions. Linear mixed-effects models were applied to markers' position vectors acquired from non-invasive method, photogrammetry. Predicted random effects showed similar patterns of STA among subjects. Large magnitudes of STA appeared on the points near the hip joint regardless of sides; however, small values appeared on the distal anterior.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.2
• /
• pp.165-178
• /
• 2000

The simplified model for 3-dimensional analysis of vehicle-bridge interactions is presented in this study. By using the analysis model which includes the eccentricity of axle loads and the effect of the torsional forces acting on the bridge, the more accurate analysis results of the behavior of the bridge can be obtained. The equations of kinetic energy, potential energy and damping energy are expressed by degrees of freedom of the vehicle and the bridge. And then by applying Lagrange's equations of motion, the equations of motion of the vehicle and the bridge are obtained. By deriving the equations of forces acting on the bridge considering the vehicle-bridge vertical interactions and also by identifying the position of vehicle as time goes by, mass matrix, stiffness matrix, damping matrix and load vector of vehicle-bridge system are constructed in accordance with the position of vehicles. Then using Newmark's β-method(average acceleration), the equations of motion for the total vehicle bridge system are solved.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.274-278
• /
• 2004

A simultaneous measurement system that can analyze the flaw-structure interactions has been developed This system consists of four CCD cameras, two for capturing instantaneous flaw fields and two for tracking a solid body. The three-dimensional vector fields around a cylinder are measured while the motion of the cylinder forced by the flow field is measured simultaneously with the constructed system The cylinder is pended in the working fluid of a water channel and the surface of the working fluid is forced sinusoidal to make the cylinder bounced Reynolds number for the mean main stream is about l000. The interaction between the flaw fields and the cylinder motion is examined quantitatively.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.4 s.59
• /
• pp.1-7
• /
• 2004

A simultaneous measurement system that can analyze the flow-structure interaction has been developed. This system consists of four CCD cameras, two for capturing instantaneous flow fields and two for tracking a solid body. The three-dimensional vector fields around a cylinder are measured, while the motion of the cylinder forced by the flow field is measured, simultaneously, with the constructed system. The cylinder is suspended in the working fluid of a water channel, and the surface of the working fluid is forced sinusoidally to make the cylinder bounced. Reynolds number for the mean main stream is about 3500. The interaction between the flow fields and the cylinder motion is examined quantitatively.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.1
• /
• pp.45-51
• /
• 2015

This study was to verify effect on muscle strength of trunk and body composition for elderly according to spinal stability exercise with three dimension. We recruited forty elderly participants(twenties as training group, the other twenties as control group) over sixty five aged. The participant performed muscle strength estimation to exercise of eight direction using spinal stability training system. Also, we estimated body composition in participants using inbody 720. Trining group performed direction exercise(F, FOR, R, BOR, B, BOL, L, FOL) and multiple exercise with band exercise, strengthening gym and walking during thirty minute. But control group only performed multiple exercise without direction exercise. All training progressed three days a week for eight weeks. The results showed that muscle strength of trunk in training group increased significantly from 79.9 point to 85.6 point with reducement of body weight, body fat and BMI. However, control group showed a few exercise effect with increasement of amount of muscles and reducement of body fat without muscle strength of trunk. These results means that spinal stability exercise could be helped to prevent obey and fall of elderly caused by muscle strengthening and improving body composition. This could be applied to develop rehabilitation program efficiently based these data.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.954-962
• /
• 1991

본 연구에서는 횡 방향으로 속도구배를 타내는 a=.part.W/.part.z에 대한 방정식을 3차원 운동량 방정식으로 부터 유도한 준 3차원 수학적 모델을 성정하여 해석하였다. 또한 수치 해석을 위하여 Chen에 의하여 고안된 유한 해석법과 2-방정식 저 레이놀즈 K-.epsilon. 난류모델, 그리고 Maeng에 의해 제시된 경계 공정 좌표계를 사용하였다. 그리 고 프로그램의 검증을 위하여 G.Ber geles가 수행한 실험치와 비교하여 그 타당성을 입증하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.8
• /
• pp.631-638
• /
• 2018

In this paper, we propose a method to improve the performance by guidance technique and applying it to the precision guided ammunition. The proposed method is a technique designed to reduce the target error of ammunition by reducing the projectile error without analyzing the motion characteristics of the shot. This technique is applied to the moving average filter technique which is widely used as signal processing technique to reduce the fluctuation of the output of the inboard mounting inertial sensor caused by the rotation and the coning motion of the ammunition. In order to compare the performance of the applied technique including the simple 3D guided control technique and the proposed improvement technique. It is confirmed that the application of this technique improves the accuracy of impact of the cannon - launched ammunition with severe environmental conditions and irregular motion characteristics unlike the missile.