• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.3
• /
• pp.33-42
• /
• 2004

While transforming the inelastic system into the equivalent elastic one gives an advantage of simpler analysis, the actual inelastic behavior of the system is hardly modeled in the capacity spectrum method (CSM). Therefore, the accuracy of CSM depends on the precise estimation of equivalent period and damping ratio as well as the modification of the elastic response spectrum and the corresponding demand spectrum. In this paper, the effect of demand spectrums on the accuracy of CSM is evaluated. First, the response reduction factors provided in ATC-40 and Euro Code are evaluated. Numerical analysis results indicated that the acceleration responses obtained using the factor of Euro Code are closer to the actual response than those obtained using the factors of ATC-40. Next, the accuracy of CSM is evaluated constructing the demand spectrum using the absolute acceleration responses and pseudo acceleration responses. The results obtained using the absolute acceleration responses were found to be generally larger than those obtained using the pseudo ones. Since CSM often underestimates the response, the use of absolute acceleration response gives the response relatively closer to the exact ones. However, the difference becomes negligible as the hardening ratio and the yield strength ratio become larger.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.561-567
• /
• 2018

This study was carried out to improve the ride quality of high-speed electric multiple unit. Through dynamic analysis of the HEMU-430X, the range of the equivalent conicity with a critical speed of 300 km/h was between 0.05 and 0.25. The initial adopted wheel profile of HEMU-430X was S1002. The equivalent conicity of S1002 with the mileage of more than 40,000 km was about 0.033 and it was confirmed that XP55 is more suitable for stable operation because XP55 has the equivalent conicity of over 0.061. In order to improve ride quality of high-speed electric multiple unit, the change of installation angle of the yaw damper was suggested from $7.35^{\circ}$ to $0^{\circ}$. From sensitivity analysis and optimization, the air spring lateral and vertical stiffness was suggested to be reduced by 30% and the secondary vertical and lateral damper damping coefficient was increased by 50%. By applying this, it was expected that the car body acceleration could be improved by about 20% on average. The HEMU-430X's yaw damper installation angle was changed to $0^{\circ}$ and the damping coefficient of the lateral damper was increased by 30%. When the test run was carried out at the speed of 300 km/h on the Kyungbu high-speed line, the vehicle lateral acceleration had improved by 34.3%. The effect of additional improvement measures proposed in this paper will be tested in the on track test. The riding quality improvement process used in this study can be used to solve ride quality problems that can occur in commercial operation of high-speed electric multiple unit in the future.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.4
• /
• pp.320-324
• /
• 2018

In this study, we examined effect of sperm penetration of oocytes after in vitro fertilization (IVF) with cauda epididymal spermatozoa in Hanwoo bull after feeding of timothy hay. One testicle with epididymides was castrated from one Hanwoo bull (14 months of age) and spermatozoa recovered from cauda epididymis and cryopreserved. As control, frozen Hanwoo semen was used. Matured cumulus oocyte complexes were co-incubated with frozen-thawed cauda epididymal spermatozoa for 12 or 18 hours. After IVF, presumptive zygotes were cultured in modified synthetic oviductal fluid. In experiment 1, we examined sperm penetration rate at 12 hours of IVF with epididymal sperm. Total penetration rate among cauda epididymis and control was similar(mean${\pm}$standard error, cauda epididymis and control vs. $49.7{\pm}11.3$ and $54.4{\pm}12.8%$). In experiment 2, cleavage and blastocyst developmental rate were evaluated at day 2 and day 8 after IVF for 18 hours. Cleavage rate among cauda epididymis and control was similar(cauda epididymis and control vs. $81.2{\pm}3.4$ and $82.7{\pm}2.5%$). However, blastocyst developmental rate of cauda epididymis group was significantly higher than that of control group(cauda epididymis and control vs. $24.4{\pm}1.6$ and $12.2{\pm}2.8%$, p<0.05). In conclusion, cauda epididymal spermatozoa in Hanwoo bull has high embryo developmental competence and can be used as an alternative to ejaculated frozen sperm in vitro.

• Journal of The Korean Association of Information Education
• /
• v.23 no.1
• /
• pp.73-84
• /
• 2019

Maker movement is emerging as one of the key areas of the fourth industrial revolution in recent years. The maker movement is to create and share what users need using a variety of inexpensive production tools such as open source software and hardware, 3D printers and laser cutters. We think that the effect would be enhanced if design thinking is applied to elementary and middle school (K-12) class. The purpose of this study is to develop a design thinking-based maker education program and to apply it to classroom for clarify the effect on the creative problem solving ability of elementary school students. In order to verify the purpose of the research, students in the 5th-6th grades of elementary school were divided into a controlled group and an experimental group. The general lecture maker class was applied in the controlled group, and our developed design thinking-based maker class was simultaneously applied in the experimental group. The creative problem solving ability test was conducted before and after the test, and its effectiveness was verified using statistical t-test. In conclusion, this study suggests that design thinking-based maker education program has a positive effect on elementary school students' creative problem solving ability.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.4
• /
• pp.243-254
• /
• 2021

In this study, the conservatism of the response displacement method (RDM) for the seismic response analysis of box-shaped power cable tunnels was evaluated. A total of 50 examples were used considering the cross-sections of 25 power cable tunnels and two soil conditions for each power cable tunnel. The following three methods were applied for the analysis by the RDM: (1) single cosine method, (2) double cosine method, and (3) dynamic free-field analysis method. A refined dynamic analysis method considering soil-structure interaction (SSI) was employed to compare the conservatism of the RDM. The double cosine method demonstrated the most conservative result, while the dynamic free-field analysis method yielded the least deviation. The soil stiffness reduction factor, C, for the double cosine method was recommended to be 0.9 and 0.7 for the operational performance and collapse prevention levels, respectively, to ensure a probability of at least 80% that the member force by the RDM is larger than that of dynamic SSI analysis.

• Journal of Space Technology and Applications
• /
• v.3 no.1
• /
• pp.86-99
• /
• 2023

The mass spectrometer, being an essential scientific instrument for uncovering the origin of the solar system and life, has been used since the early 1970s on board spacecraft to obtain information of neutral and ionized elements in the atmosphere and surface of the moon, planets, asteroids, and comets. According to the 4th Basic Plan for the Promotion of Space Development (2023-2027), Korea plans to conduct lunar landing in 2032 and Mars landing in 2045 as the core goals of the plan and focuses on developing the technologies required for unmanned robotic exploration missions. In this regard, it is crucial to develop the technology of a mass spectrometer, which is the most fundamental payload for space exploration for maximized scientific achievements, however never tried before in any domestic space missions. We describe in this paper the principle of a domestically developed quadrupole mass spectrometer, its prototype model, and the test results of its performance. We conclude this paper with intended future improvements.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.3
• /
• pp.287-301
• /
• 2009

The novel cut-and-cover tunnel construction method using rib-reinforced pre-cast arch segments has been recently developed and applied for practice to secure a structural stability of high covering and wide width section tunnels. Cut-and-cover tunnels are usually damaged by the seismic behavior of backfill grounds in case of a low covering condition. Seismic analyses are performed in this study to characterize the dynamic behavior of rib-reinforced pre-cast arch cut-and-cover tunnels. Seismic analyzes for 2 lane cast-in-place and rib-reinforced pre-cast arch cut-and-cover tunnels are carried out by using the commercial FDM program (FLAC2D) considering various field conditions such as the covering height embankment slope and excavation slope. It can be concluded that the amplification of seismic wave is reduced due to an increase in the structural stiffness induced by rib-reinforcement. The results show that the rib-reinforced pre-cast arch cut-and-cover tunnels are more effective against the seismic loading, compared to the cast-in-place cut-and-cover tunnels.

• Korean Journal of Poultry Science
• /
• v.35 no.2
• /
• pp.153-162
• /
• 2008

This experiment was conducted to evaluate the dietary effects of mixture of probiotics and colistin on laying performance, intestinal microflora and egg yolk cholesterol in laying hens. One hundred sixty 50-wk-old Hy-Line Brown layers were divided into four treatments and fed a commercial diet (Control) or experimental diets containing 0.2% mixture of probiotics or probiotics and colistin mixture (T1, Bacillus subtilis + Aspergillus oryzae + Lactobacillus plantarum; T2, Bacillus subtilis + Aspergillus oryzae; T3, Bacillus subtilis + Aspergillus oryzae+colistin) for 8 wk. No significant differences were found in laying performance and liver weight among the groups. The Haugh unit of treated groups were significantly improved (P<0.05) compared to that of control, but eggshell qualities were not changed by the treatments. The cecal ammonia concentration was significantly decreased in both T1 and T3 groups. The number of coli forms in cecal content and feces were significantly reduced in all treated groups compared to that of Control (P<0.05). The egg yolk cholesterol contents in the groups fed the diet containing mixture of probiotics and colistin were reduced in comparison with that of Control. In conclusion, dietary supplementation of mixture of probiotics and colistin improved quality of egg albumen, and reduced the egg cholesterol contents. They also reduced intestinal coli forms without harmful effects on overall productive and physiological responses in laying hens.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.3
• /
• pp.273-279
• /
• 2007

Probabilistic Risk Assessment considering statistically random variables is performed for the preliminary design of an Arch Bridge. Component reliabilities of girders have been evaluated using the response surfaces of the design variables at the selected critical sections based on the maximum shear and negative moment locations. Response Surface Method (RSM) is successfully applied for reliability analyses lot this relatively small probability of failure of the complex structure, which is hard to be calculated by Monte-Carlo Simulations or by First Order Second Moment method that can not easily calculate the derivative terms in implicit limit state functions. For the analysis of system reliability, parallel resistance system composed of girders is modeled as a parallel series connection system. The upper and lower probabilities of failure for the structural system have been evaluated and compared with the suggested prediction method for the combination of failure modes. The suggested prediction method for the combination of failure modes reveals the unexpected combinations of element failures in significantly reduced time and efforts, compared with the previous permutation method or conventional system reliability analysis method.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.6
• /
• pp.1051-1058
• /
• 2014

Yuza (Citrus junos) had 3 varieties and they had variable physiochemical properties. This study analyzed free sugar, hesperidine, naringin, flavonoid contents and antihypertensive activities according to variety and harvest time of Yuza. Three Yuza varieties, native (C. junos I), improved I (C. junos I + Poncirus trifoliata), improved II (C. junos I + C. junos II) were used. Harvest time could influence biochemical properties of Yuza such as acidity and $^{\circ}brix$. When the Yuza harvested at behind of season, the sugar/acid ratio went up because the acidity was decreased but sugar content was increased. Fructose content was dramatically high at November, Yuza of the season. Total flavonoids was high in pulp parts of improved II and in juice of native one harvested at October. The content of hesperidin and naringin in peels and juices were high in immature fruits fresh-picked at July since then they were decreased steadily and there were no difference according to varieties. The angiotensin converting enzyme (ACE) inhibition was powerful at pulp of Yuza in particular native one picked at November.