• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.5
• /
• pp.787-797
• /
• 1986

An implicit approach is employed to obtain a general boundary integral formulation of axisymmetric elastic problems in terms of a pair of singular integral equations. The corresponding kernel functions from the solutions of Navier's equation are derived by applying a three dimensional integral and a direct axisymmetrical approach. A numerical discretization schem including the evaluation of Cauchy principal values of the singular integral is described. Finally the typical axisymmetric elastic models are analyzed, i.e. the hollow sphere, the constant thickness and the V-notched round bar.

• The Journal of Engineering Geology
• /
• v.19 no.3
• /
• pp.373-387
• /
• 2009

Many cultural heritages with various periods including the 'Three Kingdoms Period' were discovered in Chulmamyeon, Busan. Detailed geomorphological and geological investigation was performed due to archaeological importance of the study area. Aerial photographic analysis for geomorphology and analysis of vertical sedimentary sections to interpret the sedimentary characteristics were carried out. Many pebbles with specific features were discovered during the investigation. The characteristics and origin of the pebbles are analysed based on their size, rock type and shape. The study area is located in a relatively low and gentle slope compared with neighboring regions. The strong N-S trending lineaments may influence the topographic features and the distribution of wells discovered in this area. The exposed sections during excavation are divided into several layers depending on colors and materials included. Some of the layers may be developed not by nature but by human activities. The similarity of the pebbles indicates that these pebbles may artificially be collected or produced for a specific purpose. This study shows that geomorphology and geology can be important in location and development of archaeological sites. The analysis and interpretation for the origin of the pebbles indicates that geological studies can be helpful to interpretation of archaeological studies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.3
• /
• pp.1-13
• /
• 1982

Transition process of plastic region. displacements, stresses and strains ahead the flaw tips were analysed by the finite element method on the steel plate with the circular hole and the one with the elliptical hole under completely alternating load (repetition of tensile loading, unloading and compressive loading). As the results, the followings were obtained. Transition process of elastic failure (yielding) region was estimated. From this the tendency was confirmed that the fracture would be initiated from ahead the flaw tip, and propagated along the $45^{\circ}$ direction. The fundamental data available in estimating the stress intensity factor that was considered as the core in analysing the fracture mechanism of steel plates were obtained. It was indicated that when unloading after tension the effect of compressive loading, and even the compressive reyield, was occured ahead the flaw tip. Similarly it was indicated that when unloading after compression the effect of tensile loading, and even the tensile reyield, was occured ahead the flaw tip. It was considered that these phenomena were occured because the unloading effect was constrained by the residual strains when unloading. It was considered that the fatigue phenomenon was occured ahead, the flaw tip by repetition of tensile yield, the above compressive reyield, compressive yeild and the above tensile reyield. In addition, the tendency was confirmed that the fracture ahead the flaw tip was occured as the flaw was changed from the circular hole to the elliptical hole and became to be the crack lastly.

• Journal of KIISE
• /
• v.42 no.1
• /
• pp.23-32
• /
• 2015

In the Android market, a large portion of the market share consists of third party applications, but not much research has been performed in this respect. Of these applications, mobile Voice Over IP (VoIP) applications are one of the types of applications that are used the most. In this paper, we focus on user authentication methods for three representative applications of the Google Voice service, which is a famous mobile VoIP application. Then, with respect to the Android file system, we developed a method to store and to send user information for authentication. Finally, we demonstrate a vulnerability in the mechanism and propose an improved mechanism for user authentication by using hash chaining and an elliptic curve Diffie-Hellman key exchange.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.94-96
• /
• 2016

본 논문에서는 기존의 백내장 추출 방법을 개선하기 위해 FCM(Fuzzy C_Means) 알고리즘을 적용하여 백내장을 추출하고 분석하는 방법을 제안한다. 제안된 방법은 애견 안구 영상에서 ROI 영역을 추출한다. 추출된 ROI 영역에서 Fuzzy Stretching 기법을 적용하여 픽셀의 상한 값과 하한 값을 조정한다. 퍼지 스트레칭 기법이 적용된 ROI 영역에 Max-Min 기반 평균 이진화 기법을 적용하여 ROI 영역을 이진화한다. 그리고 퍼지 스트레칭 기법이 적용된 ROI 영역에 FCM 알고리즘을 적용하여 양자화한 후에 양자화된 ROI 영역에서 밝기 평균 이진화 기법을 적용하여 이진화한다. 따라서 Max-Min 기반 이진화 기법을 적용하여 이진화된 ROI 영역과 밝기 평균 이진화 기법을 적용하여 이진화된 ROI 영역을 AND 연산을 적용하여 백내장의 후보 영역을 추출한다. 추출된 백내장의 후보 영역에서 침식, 팽창 기법을 적용하여 ROI 영역의 픽셀 크기를 확대 또는 축소하고 타원 형태를 가진 객체 중에서 ROI의 전체 영역의 크기가 1/5보다 적은 객체를 잡음으로 간주하여 제거한다. 잡음이 제거된 백내장의 후보 영역에서 크기가 3/5이상인 영역을 백내장 영역으로 추출한다. 제안된 방법의 성능을 분석하기 위하여 기존의 백내장 추출 방법과 제안된 백내장 추출 방법을 15개의 백내장 영상을 대상으로 실험한 결과, 제안된 방법이 기존의 백내장 추출 방법보다 백내장 추출률이 개선된 것을 확인하였다.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.32.5-33
• /
• 2009

카네기 천문대에서 주도하여 개발 중인 구경 25.4m GMT 망원경 사업에 한국도 공식적으로 참여하였다. 현재 한국천문연구원은 GMT(Giant Magellan Telescope)부경부를 국내에서 개발하고자 이와 관련된 연구를 진행하고 있다. GMT 부경은 직경 1.06m 오목거울 7장이 모여 전체 직경 3.2m인 타원면을 형성하고 초점비는 F/0.7이다. GMT 부경개발 선행 연구과제로 카네기 천문대에서 개발되어 현재 운용중인 구경 6.5m 마젤란 망원경의 부경을 선택하였는데, 이는 마젤란 부경의 형상과 직경, 부경시스템 운영방식이 GMT 와 유사하기 때문이다. 천체관측 망원경에서 거울면의 변형에 가장 큰 영향을 미치는 인자는 거울의 자중이다. 거울의 직경이 커지면 자중이 증가하게 되어 거울면의 처짐이 커지게 된다. 이를 극복하고자 다양한 거울 support들이 개발되었다. 그중에서 counterweight lever 시스템 같은 부양(float) 시스템은 자중의 영향을 보상해 줌으로써 그것에 의한 거울의 변형을 최소화하는 역할을 하는데, GMT 부경 개발에 근간이 되는 마젤란 부경 또한 부양 시스템을 도입하였다. 마젤란 부경의 부양시스템은 counterweight lever 시스템과 유사한 진공 시스템을 도입하였다. 마젤란 부경의 support는 axial 방향으로 거울을 지지하는 axial support와 lateral 방향으로 거울을 지지하는 lateral support가 있는데, 이중에서 axial support가 진공시스템으로 구성된다. Lateral 방향의 지지는 경량화된 거울의 hole 안에 3개의 판스프링을 삽입하여 단지 거울과 판스링의 강성에 의해서만 이루어진다. 이 논문에서는 망원경이 작동을 할때 즉, 천정각(zenith angle)이 변할 때 axial support와 lateral support의 조합(combination)에 의해 지지되는 마젤란 부경의 표면 정밀도 RMS 값을 비교하였다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.3
• /
• pp.247-258
• /
• 2004

Two 3-dimensional data processing techniques to predict the fractured zone ahead of a tunnel face by the tunnel seismic survey were proposed so that the geometric formation of the fractured zone could be estimated. The first 3-dimensional data processing technique was developed based on the principle of ellipsoid, The input data needed for the 3D migration can be obtained from the 2-dimensional tunnel seismic prediction (TSP) test where the TSP test should be performed in each sidewall of a tunnel. The second 3-dimensional migration technique that was developed based on the concept of wave travel plane was proposed. This technique can be applied when the TSP is operated with sources in one sidewall of a tunnel while the receivers are installed in both sidewalls. New migration technique was applied to an in-situ tunnelling site. The 3-dimensional migration was performed using measured TSP data and its results were compared with the geological investigation results that were monitored during tunnel construction. This comparison revealed that the proposed migration technique could reconstruct the discontinuity planes reasonably well.

• Journal of Gifted/Talented Education
• /
• v.21 no.2
• /
• pp.269-286
• /
• 2011

The purpose of this thesis is to examine difficulties students face in the inquiry activities of quadratic surface throughout mathematically gifted students' analogical inference and the influence of Cabri 3D in students' inquiry activities. For this examination, students' inquiry activities were observed, data of inferring quadratic surface process was analyzed, and students were interviewed in the middle of and at the end of their activities. The result of this thesis is as following: First, students had difficulties to come up with quadratic surfaced graph in the inquiry activity of quadratic surface and express the standard type equation. Secondly, students had difficulties confirming the process of inferred quadratic surface. Especially, students struggled finding out the difference between the inferred quadratic surface and the existing quadratic surface and the cause of it. Thirdly, applying Cabri 3D helped students to think of quadratic surface graph, however, since it could not express the quadratic surface graph in a perfect form, it is hard to say that Cabri 3D is helpful in the process of confirming students' inferred quadratic surface.

• Proceedings of the International Union of Geodesy And Geophysics Korea Journal of Geophysical Research Conference
• /
• 2003.05a
• /
• pp.16-16
• /
• 2003

본 연구는 ILP(International Lithosphere Project) Task Group II-4가 진행하고 있는 상부맨틀에 대한 3차원 구조도 작성 연구의 일환으로 수행되어졌으며 구조도 작성을 위한 데이터 베이스의 구조는 task group의 표준안을 따랐다. 기존 문헌과 기존의 데이터 베이스를 통해서 획득된 자료를 이용해 동해와 그 주변을 대상으로 하는 지역의 ($32-45^{\circ}$E, $122-148^{\circ}$N) 상부 670km까지의 3차원 구조도 작성을 위한 초기 모델을 구축하였으며, 이 절차를 최대한 자동화하는 프로그램을 포트란을 이용해 만들어보았다. 연구 지역에 대한 곡율을 계산하기 위해 표준타원체 모델인 WGS84과 geoid undulation 모델인 EGM96을 사용했으며 지형 고도 자료는 GTOPO30, GLOBE 1.0, 그리고 Smith and Sandwell 데이터베이스를 사용하여 지구 중심으로부터 지표까지의 거리를 구하였다. 연구지역은 $0.25^{\circ}$간격으로 나누었으며 총 5777개의 격자점을 정의하였으며 각각의 격자점에 1차원 수직구조를 부여함으로써 3차원 모델을 구축하였다. 그리고 지형적으로나 지질학적으로 유사한 지역을 하나의 구역으로 정의하고 동일한 수직구조를 부여함으로써 모든 격자점에 1차원 수직구조를 정의하지 않도록 하였다. 본 연구에서는 지표 지질은 모델에 고려하지 않았지만 지형학적으로 의미가 있는 분지나 수평적으로 불균질성이 뚜렷한 지역을 중심으로 연구 지역의 리젼을 정의하였다. 중요 리젼에 대한 지각구조에 대해서는 기존의 문헌을 통해 모델치를 정의하였으며 지각 하부부터 상부 670km에 대한 부분은 Task Group에서 제시한 표준 모델을 이용했다. 모델을 정의하기 위해 주어진 격자점에 대한 지구 중심으로부터 지오이드까지의 거리, 지오이드로부터 지표까지의 거리를 정의해주었으며, 각 격자점의 수직구조를 정의하기 위해 깊이에 따른 각 매질의 밀도, P파의 속도, S파의 속도, P파에 대한 Q값, S파에 대한 Q값을 정의 해주었다. S파의 속도를 구하기 위해서 지구 내부 물질을 포아송 매질이라는 가정 하에, 관계식을 $Vp{\;}={\;}SQRT(3){\;}{\times}{\;}Vs$ 이용하였다. 획득한 모델치들을 이용해 동해와 동해 인근 지역에 대한 초기모델을 구축하였다.

• Polymer(Korea)
• /
• v.34 no.4
• /
• pp.346-351
• /
• 2010

The mechanical properties of polypropylene (PP) composites, especially the effects of the filler shapes on the modulus were studied. The experimental results were investigated and compared with the theoretical approaches proposed by Lee and Paul and based on Eshelby's principle, which three dimensional ellipsoids were filled as filler and analyzed in terms of aspect ratio, ${\rho}_\alpha=a_1/a_3$ and ${\rho}_\beta=a_1/a_2$. The shapes of fillers were observed by SEM and aspect ratios were statistically calculated. Young's moduli in the longitudinal and transverse directions for barium sulfate whose shape was sphere ($\rho_\alpha=\rho_\beta=1$) had the same values, as predicted values. The modulus in the $x_1$ direction for a glass fibers increased as the filler content increased, while the modulus in the $x_3$ direction was increased relatively small. Furthermore, mica was also used to investigate the effects of the primary and secondary aspect ratios on the mechanical properties.