• The Journal of the Petrological Society of Korea
• /
• v.25 no.4
• /
• pp.311-324
• /
• 2016

The characteristics of the rock cleavage in Jurassic granite from Geochang were analysed. The evaluation for three quarrying planes and three rock cleavages was performed using the parameters such as (1) reduction ratio between the value of spacing and the value of length, (2) microcrack spacing frequency(N), (3) total spacing($1mm{\geq}$), (4) exponential constant(a), (5) magnitude of exponent(${\lambda}$), (6) mean spacing($S_{mean}$), (7) difference value($S_{mean}-S_{median}$) between mean spacing and median spacing($S_{median}$) and (8) density of spacing. Especially the close dependence between the above spacing parameters and the parameters from the spacing-cumulative frequency diagrams was derived. The discrimination factors representing three quarrying planes and three rock cleavages were acquired through these mutual contrast. The analysis results of the research are summarized as follows. First, the reduction ratios of frequency(N), mean value, median value, the above difference value($S_{mean}-S_{median}$) and density for three rock cleavages are in orders of G(grain, (G1 + G2)/2) < H(hardway, (H1 + H2)/2) < R(rift, (R1 + R2)/2), H < G $\ll$ R, H < G $\ll$ R, H < G < R and H < G $\ll$ R. The values of the above five parameters for three planes show the various orders of R'(rift plane) $\ll$ H'(hardway plane) < G'(grain plane), R' $\ll$ G' < H', R' < H' < G', R' < G' < H' and R' $\ll$ H' < G', respectively. Second, the values of (I) parameters(2, 3, 4 and 5) and (II) parameters(6, 7 and 8) are in orders of (I) H < G < R and (II) R < G < H. On the contrary, the values of the above two groups(I~II) of parameters for three planes show reverse orders. Third, to review the overall characteristics of the arrangement among the six diagrams, these diagrams show an order of R2 < R1 < G2 < G1 < H2 < H1 from the related chart. In other words, above six diagrams can be summarized in order of rift(R1 + R2) < grain(G1 + G2) < hardway(H1 + H2). These results indicate a relative magnitude of rock cleavage related to microcrack spacing. Especially, two parameters for each diagram, the above difference value($S_{mean}-S_{median}$) and mean spacing, could provide advanced information for prediction the order of arrangement among the diagrams. Finally, the general chart for three planes and three rock cleavages were made. From the related chart, three exponential straight lines for three rock cleavages show an order of R(R1 + R2) < G(G1 + G2) < H(H1 + H2). On the contrary, three lines for three planes show an order of H'(R2 + G2) < G'(R1 + H2) < R'(G1 + H1). Consequently, correlation of the mutually reverse order between three planes and three rock cleavages can be drawn from the related chart.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.2
• /
• pp.151-163
• /
• 2016

The characteristics of the rock cleavage in Jurassic granite from Geochang were analysed. The evaluation for the three directions of rock cleavages was performed using the parameters such as (1) frequency of microcrack spacing(N), (2) total spacing(${\leq}1mm$), (3) mean spacing($S_{mean}$), (4) difference value($S_{mean}-S_{median}$) between mean spacing($S_{mean}$) and median spacing($S_{median}$), (5) density of spacing(${\rho}$), (6) difference value between two exponents for the whole range of the diagrams(${\lambda}_H-{\lambda}_L$), (7) mean value of exponent(${\lambda}_M$), (8) mean value of exponential constant($a_M$), (9) difference value between two exponents for the section under the initial points of intersection(${\lambda}t_H-{\lambda}t_L$), (10) mean value of exponent(${\lambda}t_M$) and (11) mean value of exponential constant($at_M$). The results of correlation analysis between the values of parameters for three rock cleavages and those for three planes are as follows. The values of (I) parameters(1, 2, 7 and 8) and (II) parameters(3, 4 and 5) are in orders of (I) H(hardway, (H1 + H2)/2) < G(grain, (G1 + G2)/2) < R(rift, (R1 + R2)/2) and (II) R < G < H. On the contrary, the values of the above two groups(I~II) of parameters for three planes show reverse orders. Besides, the values of parameter $6({\lambda}_H-{\lambda}_L)$, parameter $9({\lambda}t_H-{\lambda}t_L)$, parameter $10({\lambda}t_M)$ and parameter $11(at_M)$ for three planes are in orders of R(rift plane, (G1 + H2)/2) < H(hardway plane, (R2 + G2)/2) < G(grain plane, (R1 + H2)/2), H < G < R, H < R < G and R < H < G, respectively. The values of the above four parameters for three rock cleavages show the various orders of R < H < G, R < H < G, H < G < R and H < G < R, respectively. Meanwhile, the spacing values equivalent to the initial points of contact and intersection between the two directions of diagrams were derived. The above spacing values for three rock cleavages are in order of rift(R1 and R2) < grain(G1 and G2) < hardway(H1 and H2). The spacing values for three planes are in order of rift plane(G1 and H1) < hardway plane(R2 and G2) < grain plane(R1 and H2). In particular, the intersection angles for three rock cleavages and three planes are in order of rift and rift plane < hardway and hardway plane < grain and grain plane. Consequently, the two diagrams of rift(R1 and R2) and rift plane(G1 and H1) show higher frequency of the point of contact and intersection. These characteristics of change were derived through the general chart for three planes and three rock cleavages. Lastly, the correlation analysis through the values of parameters along with the distribution pattern is useful for discriminating three quarrying planes.

• The Journal of the Petrological Society of Korea
• /
• v.28 no.1
• /
• pp.1-13
• /
• 2019

The characteristics of the rock cleavage of Jurassic Geochang granite were analysed using the parameters from the length and spacing-cumulative frequency diagrams. The evaluation for three planes and three rock cleavages was performed using the 25 parameters such as (1~2) slope angle(${\alpha}^{\circ}$and ${\beta}^{\circ}$), (3) intersection angle(${\alpha}-{\beta}^{\circ}$), (4) exponent difference(${\lambda}_S-{\lambda}_L$), (5~12) length of line(oa, ob, ol, os, ss', ll' and sl') and (13~15) length ratio(ol/os, ss'/ll' and ll'/sl'), (16) mean length((ss'+ll')/2), (17~23) area (${\Delta}oaa^{\prime}$, ${\Delta}obb^{\prime}$, ${\Delta}obb^{\prime}$, ${\Delta}oaa_a^{\prime}$, ${\Delta}obb_a^{\prime}$, ${\Delta}ll^{\prime}s^{\prime}$, ${\Delta}ss^{\prime}l^{\prime}$ and ⏢$ll^{\prime}ss^{\prime}$) and (24~25) area difference(${\Delta}obb^{\prime}-{\Delta}oaa^{\prime}$ and ${\Delta}obb_a^{\prime}-{\Delta}oaa_a^{\prime}$). Firstly, the values of the 11 parameters(group I: No. 1, 3~4, 7, 9~10, 13, 15~16, 20 and 25), the 3 parameters(group II: No. 5, 8 and 17) and the 2 parameters(group III: No. 12 and 22) are in orders of H(hardway) < G(grain) < R(rift), R < G < H and G < H < R, respectively. On the contrary, the values of parameters belonging to the above three groups show reverse orders for three planes. Secondly, the generalized chart for three planes and three rock cleavages were made. From the related chart, the distribution types formed by the two diagrams related to lengths and spacings were derived. The diagrams related to spacings show upward curvature in the chart of rift plane(G1 & H1, R') and hardway(H1 & H2, H). On the contrary, the diagrams related to lengths show downward curvature. These two diagrams take the form of a convex lens in the upper section. Besides, the two diagrams cross each other in the lower section. The overall shape formed by the above two diagrams between three planes($H^{\prime}{\rightarrow}G^{\prime}{\rightarrow}R^{\prime}$) and three rock cleavages($R{\rightarrow}G{\rightarrow}H$) display in reverse order. Lastly, these types of correlation analysis is useful for discriminating three quarrying planes.

• Korean Journal of Agricultural Science
• /
• v.34 no.1
• /
• pp.19-35
• /
• 2007

The present study was carried out to examine the effect of EGF and IGF-I in vitro maturation (IVM) of porcine oocytes and development of porcine IVM/IVF embryos. The results were summarized as follows : 1. The rates of nuclear maturation, penetrated oocytes, pronuclear formation, polyspermic oocytes and mean numbers of the penetrated sperm were not different in NCSU-23 maturation medium with 0, 1, 5 and 10 ng/ml EGF and IGF-I (P>0.05). 2. The rates of blastocyst formation at day 7 after in vitro fertilization in 0, 1, 5 and 10 ng/ml EGF groups were $11.2{\pm}1.5%$, $15.0{\pm}8.3%$, $16.8{\pm}2.8%$ and $21.4{\pm}2.0%$, also 0, 1, 5 and 10 ng/ml IGF-I groups were $11.2{\pm}1.5%$, $15.0{\pm}8.3%$, $16.8{\pm}2.8%$ and $21.4{\pm}2.0%$, respectively. In the total cells case, EGF groups were $22.8{\pm}3.7$, $25.7{\pm}5.5$, $26.0{\pm}4.2$ and $35.1{\pm}4.7$, also IGF-I groups were $21.5{\pm}3.7$, $25.2{\pm}2.8$, $26.2{\pm}2.9$ and $33.2{\pm}3.6$, respectively. Both 10 ng/ml EGF group and 10 ng/ml IGF-I group were significantly higher than those of other treatment groups (P<0.05). 3. The rates of blastocyst formation at day 7 in the NCSU23 culture medium of porcine IVF-produced embryos with 0, 1, 5, and 10 ng/ml EGF groups were $14.0{\pm}1.7%$, $16.2{\pm}1.4%$, $16.9{\pm}1.2%$ and $23.1{\pm}1.6%$, also 0, 1, 5, 10 ng/ml IGF-I groups were $13.6{\pm}1.7$, $15.7{\pm}4.5$, $16.0{\pm}0.2$ and $25.0{\pm}0.8$, respectively. And in the total cells case, EGF grups were $21.8{\pm}2.9$, $25.2{\pm}2.8$, $39.7{\pm}2.7$ and $46.2{\pm}3.6$, also IGF-I groups were $20.7{\pm}2.9$, $26.2{\pm}2.9$, $24.6{\pm}2.4$ and $46.1{\pm}3.5$, respectively. Both 10 ng/ml EGF group and 10 ng/ml IGF-I group were significantly higher than those of any other treatment groups (P<0.05). In conclusion, these results suggested that the addition of 10 ng/ml EGF and IGF-I were effective on the blastocyst formation and total cells of blastocysts.

• Korean Journal of Microbiology
• /
• v.40 no.1
• /
• pp.60-64
• /
• 2004

We tested gentamicin - resistant bacteria isolated from hospital sewage to confirm the presence of aac(3)II encoding aminoglycoside- (3)-N- acetyltransferase by dot-blot hybridization. A probe from the internal fragment of aac(3)II was hybridized to DNA from 41 % (39/95) of gentamicin resistant isolates. PCR was performed with primers from aac(3)II and Tn3. Of 39 strains, 13 strains had Tn3-aac(3)II structure. Minimal inhibitory concentration (MIC) test demonstrated that 18 strains containing Tn3-aac(3)II showed higher resistance to gentamicin than those of other strains. Thirteen strains were identified as 5 Escherichia coli, 3 Acinetobacter johnsonii, 2 Enterobacter agglomerans, 2 Micrococcus luteus, and 1 Pseudomonas facilis. These results suggest that gentamicin-resistant determinant of Tn3-aac(3)II structure was widely distributed in the gentamicin-resistant bacteria.

• Journal of the Korean Magnetics Society
• /
• v.19 no.5
• /
• pp.161-164
• /
• 2009

The effect of periodic vacancies to the magnetism of the Fe monolayer was investigated by calculating the electronic structures using the full-potential linearized augmented plane wave method within the GGA approximation. We considered four types of vacancies, point defect, I type, + type, and H type which are consisted of one, three, five and seven vacant sites, respectively. We found that the Fe atoms nearest to the vacancy have the largest magnetic moment in each system, and the value of magnetic moment of the atom was increased as the number of vacancy site is increased. The value of the largest magnetic moment in the systems of point defect, I type, + type, and H type are 3.08, 3.09, 3.15, and 3.30 bohr magnetons, respectively.

• Journal of the military operations research society of Korea
• /
• v.32 no.1
• /
• pp.188-212
• /
• 2006

The purpose of this study is to extract relavant factors that affect military accidents. A survey was conducted for 227 officers and noncommissioned officers and 300 private soldiers. The survey results extracted 9 important factors that cause military accidents, including 3 troop factors, 3 social environment factors, and 3 personal character factors. Through a regression analysis using these 9 factors as independent variables and 4 types of military accidents as dependent variables, several factors were found to be very useful to explain military accidents. The findings of this study can be used to develop an early warning system for military accidents reduction.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.2
• /
• pp.127-141
• /
• 2017

Jurassic granite from Geochang was analysed with respect to the characteristics of the rock cleavage. The multicriteria evaluation for the six directions of rock cleavages was performed using the microcrack spacing-related parameters derived from the enlarged photomicrographs (${\times}6.7$) of the thin section and the spacing-cumulative frequency diagrams. The results of analysis for the representative values of these spacing parameters with respect to the rock cleavage are summarized as follows. First, the analysis for deriving the main parameter indicating the order of arrangement among six diagrams was performed. The values of five parameters with respect to six directions of the rock cleavages were arranged in increasing or decreasing order for the above analysis. The decreasing order of the values of main parameter(mean spacing-median spacing, $S_{mean}-S_{median}$) and mean spacing are consistent with the order of H1, H2, G1, G2, R1 and R2 directions. These sequential arrangements of six directions of the rock cleavages can provide a basis for those of the six diagrams related to spacing. Second, the nine correlation charts between the above main parameter and various parameters were arranged in decreasing order of correlation coefficient ($R^2$). These related charts shows a high correlation of power-law function in common. The values of mean spacing, density (${\rho}$) and length of line oa are directly proportional to the value of main parameter, while the values of constant (a), exponent (${\lambda}$), spacing frequency (N), length of line oa', slope of exponential straight line (${\theta}$) and total length ($1mm{\geq}$) are inverse proportional. Third, the results of correlation analysis between the values of parameters for three planes and those for three rock cleavages are as follows. The values of frequency, total spacing, constant, exponent, slope and length of line oa' for three planes and three rock cleavages show an order of R' < G' < H' and H < G < R, respectively. On the other hand, the values of mean spacing, (mean spacing-median spacing), density and length of line oa show an order of H' < G' < R' and R < G < H, respectively. The correlation of the mutually reverse order of the values of parameters between three planes and three rock cleavages can be drawn. This type of correlation analysis is useful for discriminating three quarrying planes.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.3 no.2
• /
• pp.98-99
• /
• 2004

소절개 봉합술은 관혈적 봉합술에 비해 동반된 관절와 상완 관절(glenohumeral joint) 내의 병변을 확인하고 이에 대한 처치를 시행할 수 있으며, 견봉하 감압술과 함께 동반된 견봉 쇄골 관절의 병변을 치료할 수 있다. 또한 삼각근 기시부에 대한 손상을 최소화하기 때문에 빠른 재활과 조기 퇴원을 시행할 수 있는 등의 장점이 있다 관절경적 봉합술에 비해서는 수술 술기가 어렵지 않기 때문에 항상 좋은 결과를 기대할 수 있다 회전근 개 파열에 대한 수술을 시행할 때 관절경적 봉합술이 모든 경우에서 관혈적 또는 소절개 봉합술에 비해 좋은 결과를 나타내는 것은 아니다. 환자가 심한 골다공증이 있는 경우, 기술적 문제가 있는 경우, 봉합 후 회전근 개에 지나친 긴장이 염려될 때는 항상 소절개 봉합술로의 전환을 시도하여야 한다. 소절개 봉합술을 시행한 경우에도 관절경적 봉합술시와 비슷한 좋은 결과를 얻을 수 있고, 치료의 결과는 수술의 방법보다는 정확한 술기 및 수술 전 환자의 상태에 좌우된다고 하겠다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.107-116
• /
• 2013

This algorithm suggests a method in which a minimum spanning tree can be obtained fast by reducing the number of an algorithm execution. The suggested algorithm performs a select-and-delete process. In the select process, firstly, it performs Borůvka's first stage for all the vertices of a graph. Then it re-performs Borůvka's first stage for specific vertices and reduces the population of the edges. In the delete process, it deletes the maximum weight edge if any cycle occurs between the 3 edges of the edges with the reduced population. After, among the remaining edges, applying the valency concept, it gets rid of maximum weight edges. Finally, it eliminates the maximum weight edges if a cycle happens among the vertices with a big valency. The select-and-delete algorithm was applied to 9 various graphs and was evaluated its applicability. The suggested select process is believed to be the vest way to choose the edges, since it showed that it chose less number of big edges from 6 graphs, and only from 3 graphs, comparing to the number of edges that is to be performed when using MST algorithm. When applied the delete process to Kruskal algorithm, the number of performances by Kruskal was less in 6 graphs, but 1 more in each 3 graph. Also, when using the suggested delete process, 1 graph performed only the 1st stage, 5 graphs till 2nd stage, and the remaining till 3rd stage. Finally, the select-and-delete algorithm showed its least number of performances among the MST algorithms.