• Journal of the Korean Ceramic Society
• /
• v.33 no.11
• /
• pp.1267-1275
• /
• 1996

Green sheet was prepared by tape casting in the composition of (1-x)Pb(Mg1/3Nb2/3)O3-PbTiO3 system using Pb(Mg1/3Nb2/3)O3 and PbTiO3 synthesized with PbO, Nb2O5 MgO and TiO2 The densest green sheet was obtained in the weight ratio 70:30 of powder to binder. Green sheet wasmultilayered in metal mould and formed into lamination at 7$0^{\circ}C$, 300kg/cm2 The lamination was sintered at 110$0^{\circ}C$ 2hr, Dielectric constant and Curie temperature of disc type sintered body was highered with increasing the amount of PbTiO3 and was in the range of 19000-21000, -7~45$^{\circ}C$ respectively. Green and sintered relative density of lamination was 61% and 95% respectively.

• 한국벤처창업학회:학술대회논문집
• /
• 2016.04a
• /
• pp.150-153
• /
• 2016

본 연구의 목적은 제3의 산업혁명을 이끌고 있는 3D프린터에 대해 미래 중추적 역할을 담당할 3D프린팅 교육생의 3D프린터 사용의도를 기술수용모델(TAM)에 기반하여 검증하기 기초연구이다. 본 목적을 달성하기 위하여 서울의 3D프린팅 교육기관 교육전문가 조사를 실시하였으며, 차후 교육 대상자를 설문조사하여 3D프린터에 대한 기술수용의도를 파악하고 분석하고자 한다. 또한, 분석한 결과를 통해 미래 제조업 창업의 핵심 역할을 담당할 3D프린터 사용 활성화를 위한 연구기반을 마련하고자 한다. '3D프린팅 넥스트 레볼루션'의 저자 크리스토퍼 바넷은 언젠가는 3D프린팅이 우리의 삶을 혁명적으로 바꿀 것이라고 예상하고 있다. 3D프린터를 통해 개개인은 맞춤형 제품을 만들어 낼 것이 틀림없다. 치과 의료, 운송 및 항공, 로봇, 군용, 우주, 건축, 요리 등에서 다양하게 3D프린터를 활용한 제품들이 미래에 쏟아져 나올 것으로 예상한다. 생산의 민주화를 이끌 3D프린터는 기존 산업에 큰 기회와 동시에 위협을 주고 있다. 크라우드 및 네트워크를 통한 3D데이터 거래와 지구촌 여러 곳에 3D프린터가 활용된다면, 기존 산업에 혁명적인 변화가 있으리라 짐작된다. 전문가 인터뷰 결과를 기반으로 3D프린터 사용의도에 영향을 주는 5가지 요인으로 3D모델링 경험, 비용, 품질, 유희성, 혁신성이 나타났다. 5가지 독립변인은 TAM모델의 인지된 사용 유용성과 3D프린터에 대한 기술수용의도를 파악해 보고자 한다. 3D프린터 교육기간, 전공 및 학과, 개인의 경험과 혁신성의 차이가 3D프린터 기술수용 여부에 영향을 줄 것으로 예상된다. 서울지역 3D프린터 관련 교육기관에서 교육을 받았거나 받고 있는 학생을 대상으로 연구를 할 계획이며, 지역을 확대한 연구가 차후 필요할 것이다.

• Journal of the Korean Ceramic Society
• /
• v.34 no.6
• /
• pp.620-628
• /
• 1997

The possibility of the existence of a field-induced micro-macrodomain switching was proposed and examined using 9 mol % PbZrO3-doped 0.6Pb(Ni1/3Nb2/3)O3-PbTiO3 (PNN-PT) systems having rhombohedral symmetry at room temperature. the thermally depoled (freshly prepard) specimens prepared from the rhombohedral side of the system exhibited a relaxor behavior for the whole range of temperature examined (for T

• Journal of the Korean Ceramic Society
• /
• v.32 no.9
• /
• pp.967-976
• /
• 1995

The possiblity of the existence of a spontaneous relaxor-normal ferroelectric transition was proposed and examined using 1~5 mol% PbZrO3-doped Pb(Ni1/3Nb2/3)O3-PbTiO3 (PNN-PT) systems having tetragonal symmetry at rom temperature. On cooling, the system with 60mol% Pb(Ni1/3Nb2/3)O3 underwent a spontaneous transition from a relaxor to a normal ferroelectric state. A microscopic examination demonstrates that the relaxornormal ferroelectric transition corresponds to a micro-macro domain switching accompanied with thermoelastic martensitic transformation. The long-range macrodomains below the transition temperature were characterized by twinlike 90$^{\circ}$macrodomains with tetragonal symmetry. The relaxor-normal ferroelectric transition was further correlated with the rhombohedral-tetragonal first-order structural transition.

• ETRI Journal
• /
• v.23 no.3
• /
• pp.97-105
• /
• 2001

$1.6\;{\mu}m$ emission originated from $Pr^{3+}:\;(^3F_3,\;^3F_4)\;{\longrightarrow}\;^3H_4$ transition in $Pr^{3+}-\;and\;Pr^{3+}/Er^{3+}$-doped selenide glasses was investigated under an optical pump of a conventional 1480 nm laser diode. The measured peak wavelength and fullwidth at half-maximum of the fluorescent emission are ~1650nm and 120nm, respectively. A moderate lifetime of the thermally coupled upper manifolds of ${\sim}212{\pm}10{\mu}s$ together with a high stimulated emission cross-section of ${\sim}(3{\pm}1){\times}10^{-20}\;cm^2$ promises to be useful for $1.6{\mu}m$ band fiber-optic amplifiers that can be pumped with an existing high-power 1480 nm laser diode. Codoping $Er^{3+}$ enhances the emission intensity by way of a nonradiative $Er^{3+}:\;^4I_{13/2}\;{\longrightarrow}\;Pr^{3+}:\;(^3F_3,\;^3F_4)$ energy transfer. The Dexter model based on the spectral overlap between donor emission and acceptor absorption describes well the energy transfer from $Er^{3+}$ to $Pr^{3+}$ in these glasses. Also discussed in this paper are major transmission loss mechanisms of a selenide glass optical fiber.

• Journal of the Korean Chemical Society
• /
• v.36 no.3
• /
• pp.453-459
• /
• 1992

3-Aryl-3-bromopropanoyl chloride in either ether or carbon tetrachloride reacted with 2 equiv. of hydroxylamine in the absence of trimethylsilyl chloride at ambient temperature to give directly 2,5-diarylisoxazolidin-3-ones in good yields. However, when 3-benzylhydroxylamine at $0^{\circ}C$, N-benzyl-3-bromo-3-phenylpropanohydroxamic acid (72%) and N-benzyl-C-phenylnitrone (12%) were obtained. On the contrary, 3-phenylisoxazolidin-5-one (41%) and 2-benzyl-S-phenyl-isoxzolidin-3-one (38%) were obtained when 3 equiv. of benzylhydroxylamine was used under the same conditions.

• YAKHAK HOEJI
• /
• v.33 no.2
• /
• pp.80-86
• /
• 1989

2,6-Dimethyl-4-(3'-nitrophenyl)-1,4-dihydropyridine-3,5-dicarboxylic acid 3-methyl 5-(2'-phenylsulfinyl) ethyl ester (10) or 2,6-Dimethyl-4-(2' or 3'-nitrophenyl)-1,4-dihydropyridine-3,5-dicarboxylic acid 3-alkyl 5-(2-methylsulfonyl) ethyl ester (14a, b, c) were hydrolyzed by treatment with NaOH in aqueous EtOH solution to give 2,6-Dimethyl-4-(3'-nitrophenyl)-1,4-dihydropyridine-3,5-dicarboxylic acid monomethyl ester (4b), 2,6-Dimethyl-4-(2'-nitrophenyl)-1,4-dihydropyridine-3,5-dicarboxylic acid monomethyl ester (4c) and 2,6-Dimethyl-4-(2'-nitrophenyl)-1,4-dihydropyridine-3,5-dicarboxylic acid monoisopropyl ester (4d) in 80 -90% yield. By the same procedure, 2,6-Dimethyl-4-(3'-nitrophenyl)-1,4-dihydropyridine-3,5-dicarboxylic acid 3,5-bis (2'-methylsulfonyl) ethyl ester (15) gave 2,6-Dimethyl-4-(3'-nitrophenyl)-1,4-dihydropyridine-3,5-dicarboxylic acid (4e) in 96% yield.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.7
• /
• pp.718-723
• /
• 2004

Crystal structure of $(Ba-{1-x}La_x)[Mg_\frac{1+x}{3}}Nb_\frac{{2-x}{3}}]O_3$ (BLMN) ceramics with 0\leq1x \geq was investigated using synchrotron X-ray powder diffraction (XRD) and high reso(B $a_{l-x}$L $a_{x}$)[M $g_{(1+x)}$3/N $b_{(2-x)/3}$］ $O_3$lution transmission electron microscopy (HRTEM). When the La content, x, is above 0.1, the 1:2 ordered hexagonal structure found in Ba($Mg_\frac{1}{3}Nb_\frac{2}{3}})O_3$(BMN) was transformed into 1:1 ordered cubic structure. The 1:1 ordered cubic structure was maintained up to x=0.7. When x exceeded 0.7, however, BLMN was transformed into 1:1 ordered structure which has cation displacement and in-phase and anti-phase tilt of octahedra.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.11
• /
• pp.1029-1035
• /
• 2008

$LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ cathode materials prepared from different precursors in lithium rechargeable batteries were characterized by various analytical methods. $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ powders were synthesized by using solid-state reaction method and their physical and chemical properties were analyzed by XRD, SEM, particle size analyzer and TCP-AES. These materials showed different crystallinity, particle size, surface morphology and chemical composition. Also, the charge/discharge cycling of $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ electrodes was carried out under various cut-off voltages and it showed different behaviors. It was found that the electrochemical cyclability of $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ was strongly related to its crystallinity.

• Korean Journal of Optics and Photonics
• /
• v.7 no.2
• /
• pp.120-128
• /
• 1996

We studied the red, green and blue upconverted emission in 1 at.% $Er^{3+}: LaF_3$ and 1 at.% $Er^{3+}:YAlO_3$ crystals y pumping in 780~820 nm range at 14 K and 295 K. A cw titanium-sapphire laser was used to pump the $^4I_{9/2}$ level in two materials. The spectral analysis of the emission from $^4F_{9/2},\;^4S_{3/2}$ and $^2P_{3/2}$ levels allowed to reveal the upconversion process with multi-step absorption and cross-relaxation energy transfer.