• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.10
• /
• pp.1171-1177
• /
• 2017

This study evaluated the functional components of barley bran with different particle sizes and cultivars (Dahan, Hinchalssalbori, Heukgwang, Huknuri, and Boseokchal). Barley bran divided into fractions I (<60 mesh), II (60~100 mesh), and III (>100 mesh) was collected as pearling by-products produced by an industrial process consisting of consecutive barley pearlers. Total ${\beta}-glucan$ contents of all cultivars were especially highest in fraction II. Total arabinoxylan was the highest in barley bran from Boseokchal in fraction II. Total polyphenol contents were the highest in bran from Boseokchal and Hinchalssal in fraction II, and contents ranged of 5.61~7.00 and 4.24~6.58, respectively. Total flavonoid contents of all cultivars were especially highest in fraction II. 2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activities ranged from 2.78~7.53 mg L-ascorbic acid (AA) eq/g and 2.24~4.83 mg AA eq/g, respectively. ABTS and DPPH radical scavenging activities were the highest in barley bran from Dahan in fraction II. In this study, fraction II showed enriched functional components and has the best particle size range for enriched antioxidant activities. These results provide useful data for selection of appropriate cultivars and particle size of bran to achieve high quality barley processing.

• Journal of Radiation Protection and Research
• /
• v.15 no.2
• /
• pp.113-122
• /
• 1990

After four years of planning, equipment acquisition, facility construction and beam testing, the KCCH cyclotron facility was put into operation in November1986. Now the KCCH cyclotron(MC-50) has been used for four years in neutron therapy and radioisotope production. Up to December 1989, 179(1852 sessions) patient have undergone neutron therapy. Radioisotope production for nuclear medicine use was started from March 1989 after extensive work to overcome target transport, target melting, beam diagnostic and chemical processing problems. This status report introduces the cyclotron facility, and the experiences of neutron therapy and isotope production with the MC-50 cyclotron. Besides, the operation results and the general troubles of the MC-50 during 1989 are summarized. Total operation time was 1252.5 hours. Four hundred hours were used for neutron therapy of 599 treatment sessions and 832.5 hours for radioisotope production. Total amount of produced raioisotope was 1695 mCi(Ga-67 : 1478mCi, Tl-201 : 107 mCi, I-123 : 25mCi, In-111 : 85mCi). Twenty hours were used for scheduled beam testing. In 1989, 882% of the planned operation were performed on schedule and this rats is improved remarkably compared to 71.0% in 1988.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.2
• /
• pp.66-72
• /
• 1983

In order to improve the quality of salted sea mustard, the conditions of blanching, salting, and storage were examined. The process in which sea mustard was blanched for 20 seconds in boiling seawater, soaked in saturated brine solution for 20 hours and then salted for 10 hours by the spreading 10~20% (w/w) of granulated dry salt to obtain the moisture content of about 60% or below, resulted a good color retention of chlorophyll and carotenoid pigments, and organoleptic quality. The shelf-life of the product estimated by 30-40% pigment retention was 50-60days when stored at $4^{\circ}C$ or below.

• Journal of Information Technology and Architecture
• /
• v.10 no.3
• /
• pp.335-346
• /
• 2013

With the overwhelming development of information technologies, the need for software development that can deal with diversified and complex business processes has increased dramatically. As a result, companies prefer softwares that can handle far more complex processing ability and also it should be stable as well as easier to maintain. These ambivalent requirements keep the software development organizations from assessing the quantitative abilities, so that under the support of the U.S. Department of Defense the Capability Maturity Model (CMM) and Capability Maturity Model Integration (CMMI) have been developed. The CMMI upper levels for the software development companies will be evaluated to be excellent and authenticated, which drives the companies to get and maintain high levels of maturity. In this paper, a case study for a domestic software company has been exploited how to achieve CMMI level 4 and what kind of factors have been played an effective role. These issues at the domestic and international software and maintenance program, can influence the trustworthiness and marketing effects for the global market. In this paper, the company's actual case study will give clues to find out the important factors for the development and maintenance of software companies maturity levels.

• Journal of Navigation and Port Research
• /
• v.27 no.1
• /
• pp.97-102
• /
• 2003

Wire ropes are used in a myriad of various industrial applications such as elevator, mine hoist, construction machinery, lift, and suspension bridge. Especially, the wire rope of crane is important component to container transfer. If it happens wire rope failures during the operation, it may lead to safety accident, economic loss by productivity decline and so on. To solve this problem, we developed remote wire rope fault detecting system, and this system is consisted of 3 parts that portable fault detecting part, signal processing part and remote monitoring part. All detected signal has external noise or disturbance according to circumstances. So, we applied to discrete wavelet transform to extract a signal from noisy data. It is verified that the detecting system by de-noising has good efficiency for inspecting faults of wire ropes in service. As a result, by developing this system, container terminal could reduce expense because of extension fo wire ropes exchange period and could competitive power. Also, this system is possible to apply in several field such as elevator, lift and so on.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.133-133
• /
• 2008

Recently, as the down-scailing of field-effect transistor devices continues, Schottky-barrier field-effect transistors (SB-FETs) have attracted much attention as an alternative to conventional MOSFETs. SB-FETs have advantages over conventional devices, such as low parasitic source/drain resistance due to their metallic characteristics, low temperature processing for source/drain formation and physical scalability to the sub-10nm regime. The good scalability of SB-FETs is due to their metallic characteristics of source/drain, which leads to the low resistance and the atomically abrupt junctions at metal (silicide)-silicon interface. Nevertheless, some reports show that SB-FETs suffer from short channel effect (SCE) that would cause severe problems in the sub 20nm regime.[Ouyang et al. IEEE Trans. Electron Devices 53, 8, 1732 (2007)] Because source/drain barriers induce a depletion region, it is possible that the barriers are overlapped in short channel SB-FETs. In order to analyze the SCE of SB-FETs, we carried out systematic studies on the Schottky barrier overlapping in short channel SB-FETs using a SILVACO ATLAS numerical simulator. We have investigated the variation of surface channel band profiles depending on the doping, barrier height and the effective channel length using 2D simulation. Because the source/drain depletion regions start to be overlapped each other in the condition of the $L_{ch}$~80nm with $N_D{\sim}1\times10^{18}cm^{-3}$ and $\phi_{Bn}$ $\approx$ 0.6eV, the band profile varies as the decrease of effective channel length $L_{ch}$. With the $L_{ch}$~80nm as a starting point, the built-in potential of source/drain schottky contacts gradually decreases as the decrease of $L_{ch}$, then the conduction and valence band edges are consequently flattened at $L_{ch}$~5nm. These results may allow us to understand the performance related interdependent parameters in nanoscale SB-FETs such as channel length, the barrier height and channel doping.

• The KIPS Transactions:PartC
• /
• v.10C no.7
• /
• pp.891-898
• /
• 2003

This paper analyzes and proposes a scheme that improves the performance of the RTP that is developed to support the end-to-end transmission function and QoS monitor function for real-time multimedia data transmission. Although the existing RTP module supports real-time transmission, it has some problems in guaranteeing QoS parameters. To solve this problem, we propose a new Selective Repeat Adaptive Rate Control (SRARC). The SRARC can support QoS by referring to the data transmission status from the client and then classifying the network status into three levels. It selectively transmits multimedia data and dynamically controls transmission rates based on such information as bandwidth, packet loss rate, and latency that can be calculated in data transfer phase. To verify the SRARC, we implement it in real local area networks and compare the QoS parameters of the SRARC with those of the SR and RTP By the experimental results, the SRARC shows better performance in the aspects of bandwidth usage rate, packet loss rates, and transmission delays than the existing RTP schemes.

• The KIPS Transactions:PartB
• /
• v.13B no.7 s.110
• /
• pp.689-698
• /
• 2006

Pattern recognition is the study of how machines can observe the environment, learn to distinguish patterns of interest from their background, and make sound and reasonable decisions about the categories of the patterns. Color image consists of various color patterns. And most pattern recognition methods use the information of color which has been trained and extract the feature of the color. This thesis extracts adaptively specific color feature from images with several limited colors. Because the number of the color patterns is limited, the distribution of the color in the image is similar. But, when there are some noises and distortions in the image, its distribution can be various. Therefore we cannot extract specific color regions in the standard image that is well expressed in special color patterns to extract, and special color regions of the image to test. We suggest new method to reduce the error of recognition by extracting the specific color feature adaptively for images with the low distortion, and six test images with some degree of noises and distortion. We consequently found that proposed method shouws more accurate results than those of statistical pattern recognition.

• The KIPS Transactions:PartB
• /
• v.16B no.2
• /
• pp.123-130
• /
• 2009

Motion estimation (ME) plays an important role in digital video compression. But it limits the performance of image quality and encoding speed and is computational demanding part of the encoder. To reduce computational time and maintain the image quality, integer pel and fractional pel ME methods are proposed in this paper. The proposed method for integer pel ME uses a hierarchical search strategy. This strategy method consists of symmetrical cross-X pattern, multi square grid pattern, diamond patterns. These search patterns places search points symmetrically and evenly that can cover the overall search area not to fall into the local minimum and to reduce the computational time. The proposed method for fractional pel uses full search pattern, center biased fractional pel search pattern and the proposed search pattern. According to block sizes, the proposed method for fractional pel decides the search pattern adaptively. Experiment results show that the speedup improvement of the proposed method over Unsymmetrical cross Multi Hexagon grid Search (UMHexagonS) and Full Search (FS) can be up to around $1.2{\sim}5.2$ times faster. Compared to image quality of FS, the proposed method shows an average PSNR drop of 0.01 dB while showing an average PSNR gain of 0.02 dB in comparison to that of UMHexagonS.

• The KIPS Transactions:PartB
• /
• v.15B no.6
• /
• pp.575-584
• /
• 2008

According to the network condition, the communication network overload could be occurred when media transmitting. Many researches are being carried out to lessen the network overload, such as the filtering, load distributing, frame dropping and many other methods. Among these methods, one of effective method is frame dropping that reduces specified video frames for bandwidth diminution. B frames are dropped and then I, P frames are dropped according to dependency among the frames in frame dropping. This paper proposes a scheme for protecting copyrights by encryption, when we apply frame dropping to reduce bandwidth of media following MPEG-4 file format. We designed two kinds of frame dropping: first one stores and then sends the dropped files and the other drops frames in real-time when transmitting. We designed three kinds of encryption methods in which DES algorithm is used to encrypt MPEG-4 data: macro block encryption in I-VOP, macro block and motion vector encryption in P-VOP, and macro block and motion vector encryption in I, P-VOP. Based on these three methods, we implemented a digital right management solution for MPEG-4 data streaming. We compared the results of dropping, encryption, decryption and quality of video sequences to select an optimal method, and there is no noticeable difference between the video sequences recovered after frame dropping and the ones recovered without frame dropping. The best performance in encryption and decryption of frames was obtained when we apply the macro block and motion vector encryption in I, P-VOP.