• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.9
• /
• pp.839-844
• /
• 2017

In the past few years, three-dimensional (3D) printing has been developed as a rapid prototyping (RP) technique. The fused deposition modeling (FDM)-type 3D printing is one of the most useful RP methods; however, it still has several disadvantages, such as low conductivity, heat degradation, and low surface quality. In this study, test specimens are fabricated using an FDM-type 3D printer with an ABS material. Then, the specimens undergo post-processing on submerging in acetone with various processing times. As the processing time increases, surface roughness is enhanced significantly within the first five seconds by chemical processing, following which the processing effects are reduced. Furthermore, post processing causes the ultimate strength and strain to increase slightly with increased processing time.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1231-1234
• /
• 2007

This paper presents the overview of 3D video processing technologies for 3DTV such as 3D content generation, 3D video codec and video processing techniques for 3D displays. Some experimental results for 3D contents generation are shown in 3D mixed reality and 2D/3D conversion.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.585-592
• /
• 2000

Primary purpose of the system developed in this study is 3-D seismic data processing system for subsurface structure imaging and this system is developed in PC based on Linux for lower-cost computer. Basic data processing modules are originated from SU (Seismic Unix) which is widely used in 2-D seismic data processing and auxilious modules are developed for 3-D data processing. The system which is constructed by using these data processing modules is designed to GUI (Graphic User Interface) in order that one can easily control and for this purpose, GTK (Gimp Tool KiT) conventionally adapted in producing Linux application.

• Journal of Positioning, Navigation, and Timing
• /
• v.3 no.3
• /
• pp.99-105
• /
• 2014

A graphic processing unit (GPU) can perform the same calculation on multiple data (SIMD: single instruction multiple data) using hundreds of to thousands of special purpose processors for graphic processing. Thus, high efficiency is expected when GPU is used for the generation and correlation of satellite navigation signals, which perform generation and processing by applying the same calculation procedure to tens of millions of discrete signal samples per second. In this study, the structure of a GPU-based GNSS simulator for the generation and processing of satellite navigation signals was designed, developed, and verified. To verify the developed satellite navigation signal generator, generated signals were applied to the OEM-V3 receiver of Novatel Inc., and the measured values were examined. To verify the satellite navigation signal processor, the performance was examined by collecting and processing actual GNSS intermediate frequency signals. The results of the verification indicated that satellite navigation signals could be generated and processed in real time using two GPUs.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.10a
• /
• pp.28-30
• /
• 2019

본 논문은 3차원으로 복원된 데이터를 원격지에 있는 홀로렌즈에 실시간으로 전달하기 위해 개발된 중계서버 시스템을 제안한다. 원격지에 있는 홀로렌즈를 위한 실시간 전송 시스템 구축을 위해서는 복원된 3차원 데이터의 압축 스트림을 복호화 해주는 중계서버 시스템이 필요하다. 이와 같은 3차원 데이터의 구조와 원격지에서 데이터를 전달 받는 홀로렌즈 환경을 고려하여 중계서버 시스템을 설계하고 구축 했다.

• Geophysics and Geophysical Exploration
• /
• v.13 no.2
• /
• pp.159-168
• /
• 2010

Recent trend in petroleum/gas exploration is an application of 3D seismic exploration technique. Unlike the conventional 2D seismic data processing, 3D seismic data processing is considered as the one which requires expensive commercial software systems and high performance computer. This paper propose a practical 3D seismic processing methodology on a personal computer using public domain software such as SU, SEPlib, and SEPlib3D. The applicability of the proposed method has been demonstrated by successful application to a well known realistic 3D synthetic data, SEG/EAGE 3D salt model data.

• Journal of the Korean Magnetic Resonance Society
• /
• v.22 no.3
• /
• pp.46-53
• /
• 2018

NMR-based metabolomics needs various knowledge to elucidate metabolic perturbation such as NMR experiments, NMR spectrum processing, raw data processing, metabolite identification, statistical analysis, and metabolic pathway analysis regarding technical aspects. Among them, some concepts of raw data processing and multivariate analysis are not easy to understand but are important to correctly interpret metabolic profile. This article introduces NMR spectrum processing, raw data processing, and multivariate analysis.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2000.09a
• /
• pp.147-157
• /
• 2000

Primary purpose of the system developed in this study is 3-D seismic data processing system for underground investigation and this system is developed in PC based on Linux for lower-cost system. Basic data processing modules are originated from SU (Seismic Unix) which is widely used in 2-D seismic data processing and auxilious modules are developed for 3-D data processing The system which is constructed by using these data processing modules Is designed to GUI (Graphic User Interface) in order that one can easily control and for this purpose, GTK (Gimp Tool KiT) conventionally adapted in producing Linux application.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10b
• /
• pp.1313-1316
• /
• 2000

최근 GIS 기술이 급속도로 발전됨에 따라, 시스템 사용자들은 그 어플리케이션이 사용하는 3차원 지리정보가 어떠한 포맷을 가진 데이터인지에 상관없이 동작하기를 원하고 있다. 그러나, 대부분의 3차원 GIS 어플리케이션 시스템들은 시스템에 종속적인 데이터 포맷을 가진 지리정보를 이용하고 있다. 따라서, 이 연구에서는 각각의 목적에 따라 사용하고 있는 어플리케이션들을 수정하는 일없이 어떠한 환경에서의 데이터 서버 시스템에서라도 동작이 가능하도록 3차원 지리정보시스템을 위한 표준 인터페이스를 가진 데이터 제공자를 설계한다. 이 데이터 제공자는 OGC에서 제안한 OLE/COM 구현 사양을 따른다.

• Journal of Power System Engineering
• /
• v.3 no.2
• /
• pp.57-63
• /
• 1999

The fabrication of $Al_2O_3/Al$ composites by pressureless infiltration technique was made to investigate the effects of processing variables such as content of Mg, processing temperature and time on the infiltration behavior of molten Al and microstructure. When the pure Al was infiltrated into mixtures of Mg and $Al_2O_3$ powder, processing temperature required to spontaneous infiltration was decreased and critical processing temperature and Mg content were $700^{\circ}C$ and 3wt% respectively. The content of Mg was found the most powerful variable for infiltration of molten Al. The infiltration ratio increased with Mg content and processing temperature, however the $Al_2O_3/Al$ composites which were fabricated by high Mg content and processing temperature resulted in non uniform dispersion of $Al_2O_3$ particles by excessive interfacial reaction. XRD pattern indicated that $MgAl_2O_4$ and AIN was observed at the interface of $Al_2O_3$ particles and in the Al matrix as reaction products.