• 제목/요약/키워드: 2nd phase

검색결과 596건 처리시간 0.027초

Mg-Nd-Y-Zr-Zn 주조합금의 인장특성에 미치는 시효처리의 영향 (Effect of Aging Treatment on the Tensile Properties of Mg-Nd-Y-Zr-Zn Casting Alloys)

  • 김현식;예대희;강민철;김인배
    • 한국재료학회지
    • /
    • 제18권5호
    • /
    • pp.266-271
    • /
    • 2008
  • Magnesium alloys are alloyed with rare earth elements (Re, Ca, Sr) due to the limited use of magnesium in high-temperature conditions. In this study, the influences of Zr and Zn on the aging behavior of a Mg-Nd-Y alloy were investigated. magnesium alloys containing R.E elements require aging treatments Specifically, Nd, Y and Zr are commonly used for high-temperature magnesium alloys. Various aging treatments were conducted at temperatures of 200, 250 and $300^{\circ}C$ for 0.5, 1, 3, 6, and 10 hours in order to examine the microstructural changes and mechanical properties at a high temperature ($150^{\circ}C$). Hardness and high-temperature ($150^{\circ}C$) tensile tests were carried out under various aging conditions in order to investigate the effects of an aging treatment on the mechanical properties of a Mg-3.05Nd-2.06Y-1.13Zr-0.34Zn alloy. The maximum hardness was 67Hv; this was achieved after aging at $250^{\circ}C$ for 3 hours. The maximum tensile, yield strength and elongation at $150^{\circ}C$ were 237MPa, 145MPa and 13.6%, respectively, at $250^{\circ}C$ for 3 hours. The strengths of the Mg-3.05Nd-2.06Y-1.13Zr-0.34Zn alloy increased as the aging time increased to 3 hours at $250^{\circ}C$ This is attributed to the precipitation of a Nd-rich phase, a Zr-rich phase and $Mg_3Y_2Zn_3$.

DEEP-South: 2nd phase of observations for small Solar System bodies

  • Kim, Myung-Jin;Choi, Young-Jun;Yang, Hongu;Lee, Hee-Jae;Kim, Dong-Heun;JeongAhn, Youngmin;Roh, Dong-Goo;Moon, Hong-Kyu;Chang, Chan-Kao;Durech, Josef;Broz, Miroslav;Hanus, Josef;Masiero, Joseph;Mainzer, Amy;Bauer, James
    • 천문학회보
    • /
    • 제45권1호
    • /
    • pp.46.1-46.1
    • /
    • 2020
  • DEEP-South (DEep Ecliptic Patrol of the Southern Sky) team will start the 2nd phase of KMTNet observation in Oct 2020. The DEEP-South observation mainly consists of three survey modes: (1) Activity survey (AS) that aims at finding active phenomena of small Solar System bodies. (2) Light curve survey (LS) targets to discover and characterize light variations of asteroids. And (3) Deep drilling survey (DS) focuses on the objects beyond the orbit of Jupiter (Centaurus and trans-Neptunian objects) as well as near Earth asteroids. For asteroid family (AF) studies and target of opportunity (TO) observations for urgent photometric follow-up, targeted mode will also be used. DEEP-South team is awarded 7.0% of the telescope time at each site every year from Oct 2020 to Sep 2023 in the 2nd phase of KMTNet operation which corresponds to about 75 full nights a year for the network. In this presentation, we will introduce our survey strategy and observation plan.

  • PDF

Nd2Fe14B 화합물 결정의 산화 및 보자력에 관한 연구 (Study on Oxidation and Coercivity of Nd2Fe14B Compound Crystal)

  • 권해웅;유지훈
    • 한국자기학회지
    • /
    • 제22권3호
    • /
    • pp.85-90
    • /
    • 2012
  • $Nd_2Fe_{14}B$ 화합물 결정의 산화 및 미세 $Nd_2Fe_{14}B$ 결정입자의 보자력에 미치는 산화의 영향을 조사하였다. $Nd_2Fe_{14}B$ 화합물 결정의 산화속도는 $Nd_{15}Fe_{77}B_8$ 합금 잉곳 중의 과잉 성장시킨 $Nd_2Fe_{14}B$ 결정립을 이용하여 조사하였다. $Nd_2Fe_{14}B$ 화합물 결정의 산화는 이 결정상의 ${\alpha}$-Fe, $Fe_3B$, 및 Nd 산화물 복합상으로의 분해에 의해 일어 났다. $Nd_2Fe_{14}B$ 화합물 결정의 산화속도는 결정 방위와는 무관하였다. 산화반응 속도 식은 단순한 직선관계로 나타났다. $Nd_2Fe_{14}B$ 화합물 결정의 산화에 대한 활성화에너지는 약 26.8 kJ/mol로 계산되었다. HDDR 처리한 $Nd_{15}Fe_{77}B_8$ 합금을 볼밀링하여 임계단자구 크기에 유사한 미세한 $Nd_2Fe_{14}B$ 결정입자를 제조하고, 이 입자들을 이용하여 보자력에 미치는 산화의 영향을 조사하였다. 임계단자구 크기에 유사한 미세한 $Nd_2Fe_{14}B$ 결정입자(${\fallingdotseq}0.3\;{\mu}m$)는 9 kOe 이상의 높은 보자력을 가졌다. 그러나, 이 보자력은 공기 중에서 온도 상승에 따라 급격하게 저하하였다($200^{\circ}C$에서 2 kOe 이하). 이러한 급격한 보자력의 감소는 산화에 의해 미세 입자의 표면에 형성된 연자성 ${\alpha}$-Fe 및 $Fe_3B$ 상 때문으로 판단되었다.

Effect of Different Diets on Growth and Survival Rates of Snakehead (Channa striata Bloch, 1797) Larvae

  • Ambok, Bolong;Abol, Munafi;Bui Minh, Tam;Mohd Azmi, Ambak;Patimah, Ismail
    • Animal cells and systems
    • /
    • 제8권4호
    • /
    • pp.313-317
    • /
    • 2004
  • A study was conducted to determine growth and survival rates of snakehead (Channa striata) larvae. Live foods such as Artemia salina nauplii, Moina micrura and bloodworm and artificial diet were given to larvae from 1-15 days after hatching as the 1st phase and from 15-30 days as the 2nd phase. In the 1st phase, the growth and survival rates of larvae fed with Artemia nauplii were significantly different from larvae fed with Moina (p < 0.05) with values of 28.5 mg, 49% and 26.7 mg, 31%, respectively. Meanwhile, all larvae fed with bloodworm (Chironomus sp.) or artificial diet (49% protein) died within 10 days of experiment. For the 2nd phase, growth of the fry fed with Artemia or Moina differed significantly from that fed with bloodworm or pellet (200.1, 187.7, 109.6 and 8.2 mg, respectively). Specific growth rate (SGR) of larvae fed with Moina was higher than that of larvae fed with Artemia (17.9 and 17.4% day$^{-1}$, respectively) in the 1st phase. In the 2nd phase, SGRs of larvae fed with Artemia (12.7% day$^{-1}$) or Moina (11.5% day$^{-1}$) were significantly higher than those of larvae fed with bloodworm (8.3% day$^{-1}$) or dry diet (6.1% day$^{-1}$). Generally, Artemia and Moina were suitable food for snakehead larvae during the first month of their life, and artificial diet was much less acceptable and resulted in poor growth and survival.

Nd-Fe-B계 소결자석의 자기적특성 향상 연구 (Improvement of Magnetic Properties of Nd-Fe-B Type Sintered Magnet)

  • 김윤배;정우상;정원용
    • 한국자기학회지
    • /
    • 제12권2호
    • /
    • pp.57-63
    • /
    • 2002
  • Nd-Fe-B계 소결자석의 특성을 향상시키기 위해서는 Nd-Fe-B계 합금의 조성 및 제조공정을 조절하여 자성분말의 입도 및 입도분포, 강자성상인 N $d_2$F $e_{14}$B상의 분율, 자성분말의 배향도, 산소 함량, grain size 등과 같은 factor들을 최적화 하여야 한다. 본 연구에서는 실험실 규모로 Nd-Fe-B계 합금 조성 및 공정 조절을 통하여 Nd-Fe-B계 소결자석을 제조하는 연구를 수행하였으며, 분쇄매체 분쇄시간 및 ball size에 따른 Nd-Fe-B계 소결자석의 자기적특성을 분석하여 최적의 분쇄조건을 조사하였다. 또한 분쇄공정 중 FeGa합금을 첨가하여 잔류자속밀도의 감소없이 Nd-Fe-B계 소결자석의 보자력을 향상시킬 수 있었다. 이와 같은 분쇄 조건의 연구, FeGa 합금에 의한 보자력 향상, 건식분쇄 방법 및 powder blending 공정을 적용하여 잔류자속밀도( $B_{r}$,) : 14.4kG, 보자력($_{i}$ $H_{c}$) : 9.4kOe, 최대자기에너지적((BH)$_{\max}$) : 47 MGOe의 자기적 특성을 갖는 Nd-Fe-B계 소결자석을 제조하였다.

PCM/FM 전송에서 가변 컷오프 특성을 갖는 선형위상 필터 블록의 펄스 성형에 관한 연구 (A Study on Pulse Shaping of Linear Phase filter block with Variable Cutoff Frequency in PCM/FM transmission)

  • 이상래;나성웅
    • 한국통신학회논문지
    • /
    • 제31권1C호
    • /
    • pp.65-73
    • /
    • 2006
  • 본 연구의 목적은 PCM/FM 전송시스템에서 RF 대역제한을 위해 사용되는 가변 컷오프 및 선형위상 특성을 갖는 pre-modulation 필터의 설계 및 주파수 응답을 분석하는데 있다. 이러한 필터를 구현하기 위해서 디지털 FIR 필터, DAC 및 가변 2차 LPF의 필터 블록을 구성하였으며 각 스테이지별 진폭 주파수 응답 분석을 통해서 아날로그 7차 베셀 필터의 요구조건에 만족하도록 필터블록의 감쇄특성을 효과적으로 할당하여 설계하였다. 또한 필터블록의 선형위상 특성을 살펴보았으며 가변 2차 LPF에 대해서는 실제 구현할 소자를 적용하여 시뮬레이션을 수행하여 고정 대역폭의 2차 베셀 필터의 그룹지연과 비교하여 통과 주파수 대역에서 선형성 조건에 합당한지 분석하였다.

동시진공증발법을 이용한 Cu(In,Ga)Se2 박막 제작에 관한 연구 (A study on Cu(In,Ga)Se2 thin film fabarication using to co-evaporation)

  • 박정철;추순남
    • 한국정보통신학회논문지
    • /
    • 제16권10호
    • /
    • pp.2273-2279
    • /
    • 2012
  • 동시진공증발법(co-evaporation)으로 Cu(In,Ga)$Se_2$ 박막을 제작하는 논문으로서 1단계($1^{st}$-stage)에서 기판온도(substrate temperature)가 $400^{\circ}C$에서 $In_2Se_3$상($In_2Se_3$ phase)이 존재하였으며 2,3단계($2^{nd}$-stage, $3^{rd}$-stage)에서 기판온도 변화에 따른 흡수 스펙트럼(absorbency spectrum)은 차이가 크지 않다. 이것은 박막의 두께가 전부 $1{\mu}m$ 이상이므로 흡수 스펙트럼(absorbency spectrum)은 거의 차이가 없다. 2,3단계에서 기판온도 변화에 따른 SEM과 XRD를 분석한 결과, 기판온도가 증가할수록 결정구조(crystal structure)의 밀도(density)가 증가하고 기공(vacancy)이 감소하며 $480^{\circ}C$, $500^{\circ}C$에서 Cu(In0.7Ga0.3)$Se_2$상(${\mu}m$)이 형성되었다.

154 kV 변압기 보호용 비율차동계전기 오동작 방지를 위한 2고조파 억제 방식의 적용방법 및 정정값에 관한 연구 (A Study on the 2nd Harmonic Blocking Scheme and Setting Value of a Current Differential Relay for 154 kV Transformers to Prevent Maloperation)

  • 손용범;강상희
    • 전기학회논문지
    • /
    • 제67권1호
    • /
    • pp.29-37
    • /
    • 2018
  • Inrush current and fault current in a transformer need to be distinguished from one another. In order to do this, KEPCO uses a 2nd harmonic restraint/block method. We use two setting values for 2nd harmonic restraint; 15% and 10%. We also apply per-phase blocking method among various harmonic restraint methods. If the transformer is located at the radial system, we adjust 10% in the 2nd harmonic restraint, but this method is not enough to prevent mal-operations of the current differential relay and let us spend more time to change setting value again as the power system changes. In this paper, a more reasonable setting value for a 2nd harmonic blocking scheme in KEPCO is proposed. To present a proposed method, the fault data of the current differential relays which have occurred since 2009 are analyzed. To evaluate the performance of the proposed method, the results of the RTDS test for the current differential relay of the transformer by KEPCO are analyzed.

도시철도시표준화 2단계 연구개발사업 추진전략 (2nd Phase Study Plan for Urban Transit Standardization in Korea)

  • 한석윤;정종덕;이우동;홍용기
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 추계학술대회 논문집
    • /
    • pp.729-733
    • /
    • 2007
  • Urban transit is a large scale complex system which combines rolling stocks, power supply, signal communications, tracks & stations. Therefore standardization is very important because it is difficult to find causes when failures or accidents occur. The standardization of urban transit increases safety and economical efficiency, and also gives passengers convenient and comfortable feeling. We, Korea Railroad Research Institute(KRRI), had finished the 1st phase study of urban transit standardization from '95 to '06. And 2nd phase study on rolling stock, information & communication, subway station has been performed from July '07. In this paper, we introduce what we study on urban transits standardization during coming 5 years. We expect our study will contribute to increase the efficiency of urban transit.

  • PDF

CaO첨가$(Ba, Pb)O-Nd_2O_3-TiO_2$ 세라믹스의 고주파 유전특성 (Microwave Dielectric Properties of CaO Added $(Ba, Pb)O-Nd_2O_3-TiO_2$ Ceramics)

  • 윤상옥;최환;김경용
    • 한국세라믹학회지
    • /
    • 제30권2호
    • /
    • pp.101-106
    • /
    • 1993
  • Effects of CaO on microwave dielectric properties of (Ba, Pb)O-Nd2O3-TiO2 ceramic ystem were investigated. As the content of CaO increases, the sintered bulk density decreases due to the decrease of sinterability. However, with increasing the sintering tmperature, the relative dielectric constants increases. This has been attributed on the formation of the 2nd phase inclusion, TiO2(rutile). The Q values increase due to the compensation effect of Ca ions up to 1 wt%, and then decrease due to the interfacial relaxation effects. The temperature coefficient of resonance frequency increases to a positive direction with increasing the amounts of CaO.

  • PDF