• 한국인터넷방송통신학회논문지
• /
• 제12권2호
• /
• pp.159-165
• /
• 2012

본 논문에서는 통신 채널에서 발생되는 찌그러짐과 잡음의 영향을 최소화하기 위하여 사용되는 적응 등화 알고리즘인 MMA (Multi-Modulus Algorithm)와 SCA (Square Contour Algorithm)의 성능을 비교하였다. 송신 신호는 통신 채널의 진폭 전달 특성과 위상 전달 특성의 비선형성으로 인하여 찌그러져 수신될 것이므로 수신측에서 자기 적응 등화 방식을 사용하여 이들을 보상하는 것이 필요하게 된다. 자기 적응 등화 알고리즘에서는 Constant Modulus가 중요한 의미를 가지는데, 이의 계산을 위하여 MMA는 송신 신호의 2차와 4차 의 고차 통계치를 이용하지만 SCA는 2차 통계치만을 이용하는 Modulus를 이용하게 된다. 다른 알고리즘에 비해 간단한 연산으로 이들 2 가지의 전달 특성을 동시에 보상할 수 있는 알고리즘인 MMA와 SCA의 성능을 컴퓨터 시뮬레이션을 통해 비교하였다. 이때 성능의 비교를 위하여 필수적인 복원 성상도, 잔류 isi양 및 MSE, SER을 사용하였으며, 성능의 비교 결과 송신 신호의 고차 통계치를 이용하는 MMA 방식이 MSE, SER,에서 저차 통계치를 이용하는 SCA 방식보다 우월하였으며 복원 성상도와 잔류 isi에서는 SCA가 MMA보다 우월함을 알 수 있었다.

• 한국정보통신학회논문지
• /
• 제17권3호
• /
• pp.678-684
• /
• 2013

본 논문에서는 SAW 필터가 없는 LTE-Advanced RF 송신기에 적용 가능한 기저대역 송신단 회로를 제안한다. 제안하는 기저대역 송신단 회로는 Tow-Thomas구조의 2차 능동 저역통과 필터 1개와 1차 수동 RC 필터 1개로 구현되었으며, 0.7 MHz, 1.5 MHz, 2.5 MHz, 5 MHz, 7.5 MHz, 10 MHz, 그리고 20 MHz의 총 7개의 채널 차단 주파수를 제공하며, 각 채널 별로 -41 dB에서 0 dB까지 1-dB 단계로 이득 조절이 가능하다. 제안하는 2차 능동 저역 통과 필터 회로는 DC 소모 전류 효율을 높이기 위해 채널 차단 주파수를 세 그룹으로 나누어서 선택된 차단 주파수 그룹에 따라 연산증폭기의 전류 소모를 3단계로 가변 할 수 있도록 연산증폭기 내부에 3개의 단위-연산증폭기(OTA)를 병렬로 연결하여 선택적으로 사용할 수 있도록 설계하였다. 또한, 제안하는 연산 증폭기는 저전력으로 1-GHz UGBW(Unit Gain Bandwidth)를 얻기 위해 Miller 위상 보상 방식과 feed-forward 위상 보상 방식을 동시에 사용하였다. 제안하는 기저대역 송신기는 65-nm CMOS 공정을 사용하여 설계되었고 1.2 V의 전압으로부터 선택된 채널 대역폭에 따라 최소 6.3 mW, 최대 24.1 mW의 전력을 소모한다.

• 대한한방부인과학회지
• /
• 제19권4호
• /
• pp.216-224
• /
• 2006

Purpose : This study was conducted to investigate the effect of Mokhyangsaenghwa-tang beverage on postpartum recovery and lactation. One theory of oriental medical treatment for postpartum care is focused on increasing vitality and building up blood. Saengwha-tang are representative remedies for these respective principle of treatment. This experiment was carried out to evaluate the clinical effects of Mokhyangsaenghwa-tang on blood components, Body weight, BMI and prolactin level in postpartum. Methods : 65 postpartum women applied for this study, and 30 of them were included in this study. They were divided two groups. The experimental group were treated by Mokhyangsaenghwa-tang beverage, the control group were treated by citron beverage during 40 days. Then we observed the changes of the body weight, BMI, complete blood cell count, liver function test, renal function test, level of serum prolactin, Urine analysis and general conditon Questionnaire among baseline(before treatment), 1st phase(after 20 days treatment) and 2nd phase(after 40 days treatment). Results : After taking Mokhyangsaenghwa-tang beverage, body weight, body water, edema index, prolactin ana general condtion became better, but they were not statistically significant. Conclusion : This study shows that Mokhyangsaenghwa-tang can improve postpartum recovery, but more research is needed.

• 한국소음진동공학회논문집
• /
• 제22권4호
• /
• pp.383-392
• /
• 2012

This paper reports the active vibration control of plates using a positive position feedback(PPF) controller with moment pair actuators. The equations of motion of the plates under a force and moment pairs are derived and the equations of PPF controllers are formulated. The numerical active control system is then achieved. The effect of the parameters - gain and damping ratio - of the PPF controllers on the open loop transfer function was investigated mainly in terms of the system stability. Increasing the gain of the PPF controller tuned at a mode, the magnitude of the open loop transfer function is increased at all frequencies without changing the phase behavior. The increase of the damping ratio of the PPF controller leads to decrease the magnitude of the open loop transfer function and to modify its phase characteristics, ie, system stability. Based on the behavior of the gain and the damping ratio of the controller, PPF controller for reduction of the plate vibration can be achieved. Two PPF controllers are designed with their connection in parallel to control the two modes simultaneously. Each PPF controller is tuned at the $1^{st}$ and $2^{nd}$ modes, respectively. Their parameters were determined to remain the system to be stable based on the results of the parametric study. A significant reduction in vibration at the tuned modes can be obtained.

• The Korean Journal of Physiology and Pharmacology
• /
• 제9권1호
• /
• pp.23-27
• /
• 2005

The present study was performed to investigate the effects of intra-articular injection of interleukin-1${\beta}$ (IL-1${\beta}$) on the formalin-induced temporomandibular joint (TMJ) pain. Under anesthesia, a 30-gauge needle was introduced into the right TMJ region for injection of formalin. Microinjection of 50 ${\mu}l$ of 5% formalin significantly produced noxious scratching behavioral response, and the scratching behavior lasted for 40 min. Although the responses produced by formalin injection were divided into two phases, the response of 1st phase did not significantly differ from the scratching behavior response in the saline-treated group. We examined the effects of intra-articular injection of IL-1${\beta}$ on the number of noxious behavioral responses produced by 50${\mu}l$ of 5% formalin injection. Intra-articular injection of 100 pg and 1 ng of IL-1${\beta}$ significantly increased the number of behavioral responses of the 2nd phase, while 10 pg of IL-1${\beta}$ did not change the formalin-induced behavioral responses. To investigate whether IL-1 receptor was involved in the intra-articular administration of IL-1${\beta}$-induced hyperalgesic response, IL-1 receptor antagonist (IL- ra, 50 ng) was administrated together with IL-1${\beta}$ injection. IL-1${\beta}$ receptor antagonist blocked IL-1${\beta}$- induced hyperalgesic response in the TMJ formalin test. These results suggest that intra-articular injection of IL-1${\beta}$ facilitated the transmission of nociceptive information in the TMJ area.

• 대한조선학회논문집
• /
• 제45권5호
• /
• pp.530-537
• /
• 2008

Austenitic stainless steels(SUS 304, SUS 316), which are used for safety control valve of LNG carrier, are occasionally exposed in the cryogenic environment. In this regards, it is required to evaluate the mechanical characteristics under the low temperature environment. In this study, a series of uniaxial tensile test was carried out varying temperature for austenitic stainless steel. The phenomena of the strain-induced plasticity have been observed on the all temperature ranges. The critical value for threshold of 2nd hardening due to the phase transformation induced plasticity as well as the increase of hardening have been reported. The summarized experimental results would be used for the validation of numerical techniques applicable for the nonlinear hardening behavior of austenitic stainless steel under the cryogenic temperature environment.

• 한국운동역학회지
• /
• 제23권4호
• /
• pp.295-306
• /
• 2013

The purpose of this study was to provide high school male shot putters training methods of gliding and delivery motion through comparative analysis of kinematic characteristics. To accomplish this purpose, three dimensional motion analysis was performed for the subjects(PKC, KKH, YDL) who participated in high school male shot putter competition on 92nd (2011), 93rd (2013) National Sports Festival. The subjects were filmed by four Sony HXR-MC2000 video cameras with 60 fields/s. The three-dimensional kinematic data of the glide, conversion and delivery phase were obtained by Kwon3d 3.1 version. The data of the shoulder rotational angles and projection angles were calculated with Matlab R2009a. The following conclusions had been made. With the analysis of the gliding and stance length ratio, the gliding length was shorter at the TG than the SG with short-long technique but the gliding and stance length ratio was 46.8:53.2% respectively. The deviation of the shots trajectory from APSS(Athlete-plus-shot-system) revealed that the PKC showed similar to "n-a-b-c-I" of skilled S-shape type, KKH and YDL showed "n-a-d-f-I'" of unskilled type. Furthermore, they showed smaller radial distance from the central axis of the APSS and the shots were away from the linear trajectory. From this characteristics, The PKC who performed more TG than SG had shorter glide with S-shape of APSS(skilled type) showed the better record than others with technical skill. But KKH and YDL had bigger glide ratio with "n-a-d-f-I'" of unskilled type and improved their records with technical factor. The projection factor had an effect on the record directly. Because PKC maintained more lower glide and transition posture with momentum transfer through COG's rapid horizontal velocity respectively the subject possessed the characteristics of high horizontal and vertical velocity with large turning radius from shot putter to APSS.

• 한국운동역학회지
• /
• 제21권5호
• /
• pp.541-550
• /
• 2011

The purpose of this study was to investigate the kinematic characteristics of the $5^{th}$ and $6^{th}$ hurdle clearances during the final of the 100-m hurdles event at the IAAF World Championships, Daegu 2011. To this end, the hurdling motions of the top 4 ranked female hurdlers in the competition were analyzed. A total of 12 cameras were used to record their motions, with a sampling frequency of 120 Hz. The cameras were calibrated using $11{\times}2{\times}1\;m$ control objects that covered all of the lanes ($1^{st}{\sim}8^{th}$ lanes). After analyzing all the data, we arrived at the following results. For the take-off phase, a negative relationship between the take-off time (CT) and athlete's rank was found. In addition, the average distances from the hurdle to take-off (L1) were shown to be 2.23 m and 2.17 m for the $5^{th}$ and $6^{th}$ hurdles, respectively. For the distance from the hurdle to landing (L2), Pearson ($1^{st}$ rank) and Carruthers($2^{nd}$ rank) showed inconsistent patterns whereas Harper ($3^{rd}$ rank) and Porter ($4^{th}$ rank) showed consistent patterns. All althetes revealed similar 3 steps patterns between hurdles, which consisted of a shorter $1^{st}$ step, longer $2^{nd}$ step and shorter $3^{rd}$ step.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.701-708
• /
• 2003

Recently, piezocone penetration test is frequently conformed in order to estimate the characteristics of soft ground with standard penetration test, generally used in the past. The soil characteristics, such as cone penetration resistance, friction resistence and excessive pore water pressure, can be evaluated continuously through the piezocone penetration test. In Incheon International Airport 2nd phase site preparation, standard penetration test and piezocone penetration test were used in order to increase the confidence for determination of soft ground depth. And the compressible layer was determined by the comparison between the preconsolidation pressure and the designed increase pressure. As the results, the relation between standard penetration test and piezocone penetration test shows q$_{c}$=(1.09~l.63)N at the soft ground, determined by 5/30 N value. And q$_{c}$=(1.21~l.98)N was shown at the point of compressible layer, evaluated by the preconsolidation pressure. These results were applied to determination for the depth of soft ground and to design the improvement for the soft clay.lay.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.101-109
• /
• 2010

This paper reports active control of clamped beams using acceleration feedback controllers (AF). The equations of motion of clamped beam under force and moment pairs were derived and the equations of AF controllers were formulated. The effect of the parameters - gain and damping ratio - of the AF controllers on the open loop transfer function was investigated mainly in terms of the system stability. Increasing the gain of the AF controller tuned at a mode, the magnitude of the open loop transfer function is increased at all frequencies. The increase of the damping ratio of the AF controller leads to decrease the magnitude of the open loop transfer function and modifies its phase characteristics to be more stable. Three AF controllers connected in parallel were then proposed. Each AF controller is tuned at the $2^{nd}$, $3^{rd}$ and $4^{th}$ modes, respectively. Their parameters were determined to remain the system to be stable based on the results of the parametric study. A significant reduction in vibration at the 3 modes can be obtained.