• Journal of the korean academy of Pediatric Dentistry
• /
• v.8 no.1
• /
• pp.89-102
• /
• 1981

1147 preschool children aged from 3 to 6 living in some farm villages in Kyungki-do were surveyed on dmf and distribution of dental caries in primary dentition. The results were as follows: 1. dmf rate ... 92.76 % boy ... 94.52 % girl ... 90.5.5 % 2. dmf t rate ... 37.07 % dmf t index ... 7.09 3. dmf s rate ... 13.74 % dmf s index ... 13.14 % 4. df t index ... 6.94 5. Each percentage of d, m & f per dmf teeth d rate ... 89.96 % m rate ... 7.24 % f rate ... 2.67 % 6. Most frequent site of dental caries in each tooth $\underline{A}$ mesial $\overline{A}$ distal $\underline{B}$ mesial $\overline{B}$ distal $\underline{C}$ distal $\overline{C}$ distal $\underline{D}$ disto-occlusal $\overline{D}$ disto-occlusal $\underline{E}$ linguo-occlusal $\overline{E}$ occlusal 7. Order of caries susceptibility $\overline{E}$ $\underline{E}$ $\overline{D}$ $\underline{D}$ $\underline{A}$ $\underline{B}$ $\overline{C}$ $\underline{C}$ $\overline{B}$ $\overline{A}$ 8. All the values in caries criteria showed a marked increae from those of 1968.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.3
• /
• pp.19-33
• /
• 1998

The primary objective of this research was to develop optimal models for masking the road traffic noise with the sound of a waterfall at urban small green spaces. Noise levels were measured at 8 roadside green spaces in SEOUL and questionnaires were randomly distributed to 40 users for evaluating the noise at each site at the same time. College students participated in the experiment for the development of masking models and the developed models were tested by users at 2 green spaces. The major results are as follows ; 1. Traffic noises ranged from 65dBto 70 dB. Users' satisfaction with the noise became considerably low on the basis of 60 dB and it was highly related to noise level. 2. Noise was a main factor to depreciate the amenity of green spaces where its level was more than 60 dB and so it neds to be excluded or reduced the traffic noise at the process of design. 3. Masking effects kept constant independent of the spatial location of masker on condition that masker levels were equal. It was effective when masker was 5-10dB greater than noise level which was masked. 4. As noise level went up, satisfaction ratings about the masked noise became low but masking effects increased in proportion to its level. 5. It was proved that the models were valid through the field experiment.

• Journal of Ecology and Environment
• /
• v.33 no.2
• /
• pp.121-131
• /
• 2010

Betula platyphylla var. japonica and Betula ermanii segregate vertically at an elevation of approximately 1,850 m on Mt. Neko in Nagano Prefecture, Japan. B. platyphylla var. japonica and B. ermanii were the dominant species below and above this altitude, at which the mean-annual and growing-season air temperatures were $4^{\circ}C$ and $14.1^{\circ}C$, respectively. Based on a modification of Kira's warmth index which employs cumulative temperature represented as $^{\circ}C$ day, leaf unfolding in both species was observed to be initiated at $58^{\circ}C$ day and $169^{\circ}C$ day, respectively. In 1996, leaf unfolding was initiated on 18 May in B. platyphylla var. japonica (+/-6 days) and on 5 June in B. ermanii (+/-8 days), shortly after the last frost which occurred on 5 May 1995 above 1,850 m; below this elevation there was no risk of frost at the time. At elevations above 1,850 m, the unfolded leaves of B. platyphylla were damaged by late frost, while B. ermanii escaped injury because the leaves were still protected by winter buds. The optimum temperature for seed germination in both B. platyphylla and B. ermanii was $30^{\circ}C$. Temperature alternation from 10 to $30^{\circ}C$ and moist storage of seeds at $4^{\circ}C$ (stratification) prior to incubation increased germination rates in both species. The seedlings of B. ermanii had a greater survival rates than those of B. platyphylla var. japonica when planted above 1,850 m. Comparisons of the timing of leaf unfolding and the latest frost at a site appeared to be the main factors affecting the vertical distribution of these species.

• Journal of Integrative Natural Science
• /
• v.4 no.4
• /
• pp.273-277
• /
• 2011

It's a threat for the public health that H1N1 (Influenza virus A) causes disease and transmits among humans. WHO (world health organization) declared that the infections caused by the new strain had reached pandemic proportions. The approved neuraminidase inhibitors (Zanamivir and Oseltamivir) and related investigative drug (BCX-1812) are potent, specific inhibitors of influenza A and B viruses. These drugs are highly effective to prevent influenza A and B infections. Early therapeutic use reduces illness duration and respiratory complications. Recently, we found one of the potent inhibitor of erystagallin A ($IC_{50}$ of 2.04 ${\mu}M$) for neuraminidase target, this inhibitor shows most similar structure to its natural substrate, sialic acid. Therefore, we chose 1l7f to get the receptor structure for docking study among many crystal structures. A docking study has been performed in Surflex-Dock module in SYBYL 8.1. In the present study, we attempt to compare the docking studies of pterocarpin and erystagallin A with neuraminidase receptor structure. In the previous report, the methoxy group of pterocarpin had H-bonding with Arg residues. The present docking results for erystagallin A showed the backbone of hydroxyl group shows significant H-bonding interactions with Arg152 and Arg292. The results showed that erystagallin A interacts more favorably with distinctive binding site rather than original active site. Therefore, we tried to reveal plausible binding mode and important amino acid for this inhibitor using docking and site id search calculations of Sybyl. The results obtained from this work may be utilized to design novel inhibitors for neuraminidase.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.2
• /
• pp.52-58
• /
• 2005

In Korea, little attention has been paid to microbial perchloroethylene (PCE) and/or trichloroethylene (TCE) dechlorination activity and identification of microorganisms involved in PCE reductive dechlorination at a PCE-contaminated aquifer. We performed microcosm tests using the groundwater samples from 4 different contaminated sites (i.e. Changwon A, Changwon B, Bucheon and Yangsan) to assess PCE reductive dechlorination activity. We also adapted molecular techniques to screen what types of known reductive dechlorinators are present at the PCE-contaminated aquifers. In the Changwon A and Changwon B active microcosms where potential electron donors such as sodium propionate, sodium lactate, sodium butyrate, and sodium fumarate, were added, ethylene, an end-product of complete reductive dechlorination of PCE, was detected after a period of 90 days of incubation. In the Bucheon and Yangsan active microcosms, cis-1,2-dichloroethylene (c-DCE) was accumulated without the production of vinyl chloride (VC) and ethylene. Molecular techniques were used to evaluate the microbial community structures in the Changwon B and Yangsan aquifer. We found two sequence types that were closely related to a known PCE to ethylene dechlorinator, named uncultured bacterium clone DCE47, in the Changwon B site clone library. However, in the Yangsan site clone library, no sequence type was closely related to known PCE dechlorinators reported. It is plausible that microorganisms being capable of completely dechlorinating PCE to ethylene may be present in the Changwon B site aquifer. In this study we find that complete PCE reductive dechlorinators are present at some PCE-contaminated sites in Korea. In an engineering point of view this information makes it feasible to apply a biological reductive dechlorination process for remediating PCE- and/or TCE-contaminated aquifers in Korea.

• Journal of Korean Society of Forest Science
• /
• v.90 no.6
• /
• pp.683-691
• /
• 2001

This study aimed to clarify the influencing factors of the mesopore ratio on a pore geometry of surface soil in mixed stands as an index of the water retention capacity. Twenty four factors including site conditions and soil properties were analyzed by spss/pc+ for the data collected from during March to October of 1995. The factors influencing the mesopore ratio(pF2.7) on the surface soil were as follows; mesopore ratio(pF2.7) on the B horizon soil, under vegetation coverage, organic matter contents of surface soil and F layer depth. And influencing factor on the ratio of mesopore in the soil surface was correlated with surface soil hardness and depth of 10cm soil hardness shows high negative significance. Also, multiple regression equations for mesopore ratio of the mesopore ratio of B horizon soil and organic matter contents shows high significance($R^2$; 0.84).

• Korean Journal of Materials Research
• /
• v.29 no.3
• /
• pp.150-154
• /
• 2019

This study investigates the effect of MnO2 and CuO as acceptor additives on the microstructure and piezoelectric properties of $0.96(K_{0.5}Na_{0.5})_{0.95}Li_{0.05}Nb_{0.93}Sb_{0.07}O_3-0.04BaZrO_3$, which has a rhombohedral-tetragonal phase boundary composition. $MnO_2$ and CuO-added $0.96(K_{0.5}Na_{0.5})_{0.95}Li_{0.05}Nb_{0.93}Sb_{0.07}O_3-0.04BaZrO_3$ ceramics sintered at a relatively low temperature of $1020^{\circ}C$ show a pure perovskite phase with no secondary phase. As the addition of $MnO_2$ and CuO increases, the sintered density and grain size of the resulting ceramics increases. Due to the difference in the amount of oxygen vacancies produced by B-site substitution, Cu ion doping is more effective for uniform grain growth than Mn ion doping. The formation of oxygen vacancies due to B-site substitution of Cu or Mn ions results in a hardening effect via ferroelectric domain pinning, leading to a reduction in the piezoelectric charge coefficient and improvement of the mechanical quality factor. For the same amount of additive, the addition of CuO is more advantageous for obtaining a high mechanical quality factor than the addition of $MnO_2$.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.3
• /
• pp.252-264
• /
• 1991

The purpose of this study was to compare the response of adjacent tissue and new bone formation after implantation by different methods of subperiosteal using using Proplast I and II in rabbit mandible. Microstructure of Proplast I and II was observed by scanning electron microscope. And the implantation procedure was carried out by dividing into tow groups, A and B. a group consisted of subperiosteal graft on the cortex, and the other B group was made up onlay graft following artificial decortication in the madibular body of rabbit. The experimental animals were sacrificed on the 1st, 2nd, 4th and 8th week after grafting for macroscopic and histopathologic examination. The samples extracted at the 6th postgrafting week were also used for biometric test. The result ere as follows : 1. By scanning electron microscopic observation, pore size was $50{\sim}180{\mu}m$ in the Proplast I and $100{\sim}220{\mu}m$ in Proplast II. 2. Macroscopically, infection of the graft site, deformation and displacement of the implanted materials were not observed in all experimental groups. 3. In the tissue response, infiltration of inflammatory cells and multinucleated giant cells were observed from the 2nd to the 8th week in Proplast I. Inflammatory cells decreased in number from the 2nd week in Proplast II suggesting that Proplast II is better than Proplast I. 4. Bone formation was not observed until the 8th week in the group A, but new bone formation from the surrounding graft bed and the periostium was appeared from the 4th week in the group B. 5. The maximum mean values of shear stress mere serially $65.5gf/mm^2$ in Proplast II of group B, $32.9gf/mm^2$ in Proplast I of group B, $17.0gf/mm^2$ in Proplast II of group A, and $15.7gf/mm^2$ in Proplast I. of group A.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.2
• /
• pp.127-134
• /
• 2017

Bottom ash (BA) has different macro- and micronutrients such as B, Mo, Fe, Ca, and Mg, providing useful resources for plant growth and soil quality. The objective of this study was to evaluate the applicability of artificial top-soil treated with BA in park area as a vegetation base material, especially for turfgrass growth. Collected BA was mixed with peat moss and clay at the ratio of 70:10:20 (w/w). In order to evaluate the park quality and turfgrass growth in park area, the artificial soil was applied with BA along with the control or without BA. Result showed that exchangeable K and P were increased by $11.4mg\;kg^{-1}$ and $163mg\;kg^{-1}$, respectively, compared to the control soil when the artificial soil was treated with BA. Microbial population and enzyme activity (Acid-phosphatase, APA) in artificial soil having BA also increased as 2 times and 10%, respectively, compared to the control soil. Comparing turfgrass growth and yield between general soil and artificial soil, about 2 times higher plant yield (fresh weight) was observed as artificial soil was applied comparing to general soil. Furthermore, nutrient concentration in turfgrass was averaged as 0.440% for $P_2O_5$, 0.456% for CaO, 1.198% for $K_2O$ and 0.188% for MgO that all values are higher than general soil (0.323% for $P_2O_5$, 0.416% for CaO, 0.610% for $K_2O$ and 0.173% for MgO). Application of BA can be useful for vegetation base material in park site.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.364-367
• /
• 2006

The decrease of polarization resistance in cathode is the key point for intermediate temperature SOFC(Solid Oxide Fuel Cell). In this study, the Influence of Co substitution in B-site at perovskite PSCM (Pr0.3Sr0.7CoxMn(1-x)) was investigated. The PSCM series exhibits excellent MIEC(Mixed ionic Electronic Conductor) properties. The ASR(Area Specific Resistance) of PSCM3773 was $0.174{\Omega}cm^2\;at\;700^{\circ}C$. The activation energy of PSCM3773 was also lower than other compositions of PSCM. The ASR values were increased gradually during the thermal cycling test of PSCM37773 due to the delamination between electrolyte and cathode materials.