• Journal of Embryo Transfer
• /
• v.21 no.2
• /
• pp.121-128
• /
• 2006

In this study, we examined the effects of molecular weight, concentrations and treat the duration of polyvinylpyrrolidone (PVP) in vitro maturation (IVM) medium (Experiment 1), and the effect of PVP in IVM, in vitro fertilization (IVF) and in vitro culture (IVC) medium on the development and cell number of porcine embryos (Experiment 2). The base mediums were NCSU 23 solution for IVM, mTBM solution for IVF and PZM3 solution for IVC. In experiment 1, the development rates to 2 cell and blastocyst stage were not differ from the different molecular weight (MW), concentration and duration of PVP in IVM medium. However, the hatching rate of blastocyst was significantly higher in the group of MW 40,000, 0.5% and $0{\sim}44hr$ than in the other groups (p<0.05). In experiment 2, the results of IVM, IVF and IVC medium with (W) or without (W/O) 0.5% MW 40,000 PVP are follows. The development rate to 2 cell stage was highest in the group of W-W/O-W (p<0.05). The development rate to blastocyst and hatching rate was higher in the group of W-W/O-W and W-W/O-W/O than that of other treatments (p<0.05).

• Journal of Korea Foresty Energy
• /
• v.17 no.1
• /
• pp.23-29
• /
• 1998

This study was carried out to develop the regression model for estimating biomass of natural Pinus densiflora forests by stand density in northeast Chinese area of Mt. Paekdu. Four allometric regression models(W=aD$^b$, W=a(D$^2$H)$^b$. logW=a+b$\cdot$ logD+cD and logW=a+b$\cdot$log(D$^2$H)+c(D$^2$H)) were used to estimate biomass for each of the tree components. The suitable regression model for estimating biomass of stem, bark and whole tree above ground was logW=a+b$\cdot$log(D$^2$H)+c(D$^2$H), and that for biomass of branch, needle and needle area, logW=a+b$\cdot$logD+cD for all of the stand density classes.

• Fire Science and Engineering
• /
• v.26 no.2
• /
• pp.105-111
• /
• 2012

In this research, aluminum composite panels of the general materials and fire retardant materials as building claddings make researches about fire performance comparison analysis. Test methods of the small and medium cone calorimeter experiments and SBI (Single Burning Item) experiments was applied to the determination. As a result, in the experiments peak heat release rate cone calorimeter the general aluminum composite panel $1,293kW/m^2$ ($75kW/m^2$), flame-retardant aluminum composite panel $70kW/m^2$ ($75kW/m^2$) was measured. In the SBI experiments fire growth rate the general fire aluminum composite panel is approximately 743 W/s and the flame-retardant aluminum composite panel is approximately 97 W/s of the value were measured. Thus, a standards enactment are urgently required in this case it is used as building claddings of the aluminum composite panel by fire risk assessment.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.230.2-230.2
• /
• 2008

• Fisheries and Aquatic Sciences
• /
• v.16 no.1
• /
• pp.57-61
• /
• 2013

I hypothesized that the manipulation of dietary nutrient contents including phosphorous could affect compensatory growth of juvenile olive flounder, Paralichthys olivaceus. Thirty fish averaging 34.8 g per tank were randomly chosen and distributed into 15 flow-through 180-L tanks. Three experimental diets were prepared: the control (C) diet, high protein and lipid (HPL) diet, and HPL diet with supplementation of calcium phosphate-monobasic (HPLP). Five treatments were prepared in triplicate: fish were hand-fed daily with the C diet twice a day for 8 weeks (C-8W); fish were starved for 1 week, and then fed with the HPL or HPLP diets twice a day for 7 weeks, and referred to as HPL-7W and HPLP-7W, respectively; and fish were starved for 2 weeks, and then fed with the HPL or HPLP diets twice a day for 6 weeks, and referred to as HPL-6W and HPLP-6W, respectively. The body weight of fish with C-8W, HPL-7W and HPLP-7W treatments was higher than fish with HPL-6W and HPLP-6W treatments on week 2, 4 and 6 after an initiation of the trial. At the end of the 8-week trial, fish with HPLP-7W and HPL-7W treatments overcompensated, as compared to fish with C-8W treatment. Full compensation was not achieved in fish subjected to the 2-week feed deprivation (HPL-6W and HPLP-6W treatments). Overall feed intake by fish was proportional to weeks of feeding. Feed conversion ratio of fish with HPLP-7W, HPL-6W and HPLP-6W treatments was higher than fish with C-8W treatment. The study showed that dietary supplementation of protein and lipid resulted in overcompensation of juvenile olive flounder subjected to a 1-week feed deprivation, but not a 2-week feed deprivation. Additionally, dietary supplementation of phosphorous did not further improve compensatory growth of fish.

• Journal of the Korean Chemical Society
• /
• v.52 no.2
• /
• pp.164-168
• /
• 2008

CaWO4 crystals were synthesized by a microemulsion method. Various sizes and shapes of CaWO4 were obtained by changing the molar ratio (w) of H2O to CTAB. At w=5 and 10, oval CaWO4 crystals with length of 100 nm and 500 nm were obtained, respectively. At w=20, rod-like CaWO4 crystal with length of 1 μm was obtained. The sphere CaWO4 crystal with length of about 2~3 μm was obtained at w=30. The CaWO4 crystal morphology changes from oval to sphere via a rod by aggregation with increasing the molar ratio of H2O to CTAB.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.6
• /
• pp.645-654
• /
• 2021

In this paper, we proposed a protocol to convert 2W telephone analog signals to Ethernet data in a private PSTN 2W tactical voice system. There are several kinds of operational problems in the tactical telephone network where 2W telephone copper lines are installed hundreds of meters away from the PBX in a headquarter site. The reason is that it is difficult to install and maintain the 2W telephone copper cable in severe operational fields and to meet safety and stability operational requirements of the telephone line under lighting and electromagnetic environments. In order to solve these challenging demands, we proposed an efficient method that the 2W analog interface signals between a private PBX system and a 2W telephone is converted to Ethernet messages using the optical Ethernet data communication network already deployed in the tactical weapon system. Thus, it is not necessary to install an additional optic cable for the ethernet telephone line and to maintain the private PSTN 2W telephone network. Also it provides safe and secure telecommunication operation under lightning and electromagnetic environments. This paper presents the conversion protocol from 2W telephone signals over Ethernet interface between PBX systems and 2W telephones, the mutual exchange protocol of ethernet messages between two converters, and the rule to process analog signal interface. Finally, we demonstrate that the proposed technique can provide a feasible solution in the tactical weapon system by analyzing its performance and experimental results such as the bandwidth of 2W telephone ethernet network and the transmission latency of voice signal, and the stability of optic ethernet voice network along with the ethernet data network.

• Nuclear Engineering and Technology
• /
• v.31 no.6
• /
• pp.561-571
• /
• 1999

Microstructure and mechanical properties of five Cr-Mo steels for nuclear industry applications have been investigated. Transmission electron microscopy, energy dispersive spectrometer, differential scanning calorimeter, hardness, tensile, and impact test were used to evaluate the Cr and W effect on the microstructure and mechanical properties. Microstructures of Cr-Mo steels after tempering are classified into three types : bainitic 2.25Cr-lMo steel, martensitic Mod.9Cr-lMo, HT9M, and HT9W steels, and dual phase HT9 steel. The majority of the precipitates were found to be M$_{23}$C$_{6}$ carbides. As minor phases, fine needle-like V(C,N), spherical NbC, fine needle-like Cr-rich Cr$_2$N, and Cr-rich M$_{7}$C$_3$were also found. Addition of 2wt.% W in Cr-Mo steels retarded the formation of subgrain and dissolution of Cr$_2$N precipitates. Hardness and ultimate tensile strength increased with increasing Cr content. Though Cr content of HT9W steel was lower than that of HT9 steel, the hardness of HT9W was higher due to the higher W content. W added HT9W steel had the highest ultimate tensile strength above $600^{\circ}C$. But impact toughness of W added steel (HT9W) and high Cr steel (HT9) was low.w.w.

• Horticultural Science & Technology
• /
• v.32 no.6
• /
• pp.819-826
• /
• 2014

This study was carried out to investigate the effects of night-time far-infrared irradiance quality of red pepper dried in greenhouses. This study involved 4 treatments: sunlight alone (control), or sunlight plus nightly far-infrared irradiation at $250W{\cdot}6.6m^{-2}$ ($250W{\cdot}6.6m^{-2}$), far-infrared irradiation at $250W{\cdot}3.3m^{-2}$ ($250W{\cdot}3.3m^{-2}$), or far-infrared irradiation $500W{\cdot}3.3m^{-2}$ ($500W{\cdot}3.3m^{-2}$). The drying periods were 12 days in $500W{\cdot}3.3m^{-2}$ and $250W{\cdot}3.3m^{-2}$, and 14 days in $250W{\cdot}6.6m^{-2}$, and 15 days in the control. The daytime temperature was same among the treatments. The lowest temperature was at $23.8^{\circ}C$ in control, and $29.5-37.2^{\circ}C$ in far-infrared irradiation treatments. The marketable yield was 7-14% higher in far-infrared irradiation treatments compared to the control. The rate of marketability was higher in far-infrared irradiation treatments (93.6-96.3%) than in the control (87.0-87.5%). The American Spice Trade Association (ASTA) value was greatest in the $250W{\cdot}3.3m^{-2}$ treatment, followed by $250W{\cdot}6.6m^{-2}$, then $500W{\cdot}3.3m^{-2}$, and finally the control. Capsaicinoid content showed no regular trend among the treatments. Our results provide an optimized method for reducing drying time of red pepper under sunlight, and improving the quality of dried red pepper.

• Journal of the Chungcheong Mathematical Society
• /
• v.25 no.2
• /
• pp.201-215
• /
• 2012

In this paper, we prove the stability in random normed spaces via fixed point method for the functional equation $f(x+y+z+w)\;+\;2f(x)\;+\;2f(y)\;+\;2f(z)\;+\;2f(w)\;-\;f(x+y)\;-\;f(x+z)\;-\;f(x+w)\;-\;f(y+z)\;-\;f(y+w)\;-\;f(z+w)=0$.