• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.135-141
• /
• 2005

Measurement of five DOF motion errors in a ultra precision feed table was attempted in this study. Yaw and pitch error were measured by using a laser interferometer and roll error was measured by using the reversal method. Linear motion errors in the vertical and horizontal directions were measured by using the sequential two point method. In this case, influence of angular motion errors was compensated by using the previously measured ones by the laser interferometer and the reversal method. The capacitive type sensors and an optical straight edge were used in the reversal method and the sequential two point method. Influence of thermal deformation on sensor jig was investgated and minimized by the periodic measurement according to the variation of room temperature. Deviation of gain between sensors was also compensated using the step response data. 5 DOF motion errors of a hydrostatic table driven by the linear motor werer tested using the measurement method. In the horizontal direction, measuring accuracies for the linear and angular motion were within ${\pm}0.02\;{\mu}m$ and ${\pm}0.04$ arcsec, respectively. In the vertical direction, they were within ${\pm}0.02{\mu}m$ and ${\pm}0.05$ arcsec. From these results, it was found that the introduced measurement method was very effective to measure 5 DOF motion errors of the ultra precision feed tables.

• 한국음향학회지
• /
• 제20권2호
• /
• pp.58-65
• /
• 2001

잔향에 대한 인간의 주관적인 지각을 객관적인 수치로써 나타내는 방법으로 5자유도 잔향 모델이 제안된 바 있다[1]. 5자유도 잔향 모델은 잔향에 대한 다섯 개의 객관적인 평가량들을 이용하여 시간에 따른 음 에너지 감쇠 곡선을 근사한 것으로, 인공적으로 잔향을 합성하고자 할 때 잔향 필터의 설계 기준으로 유용하게 사용될 수 있다. 그러나 이로부터 구현할 수 있는 잔향 필터는 이론적으로 무한히 많을 수 있고, 따라서 인간이 듣기에 부자연스러운 합성음을 만들어 내는 경우도 존재할 수 있다. 본 논문은 5자유도 잔향 모델의 한계를 시간 영역과 주파수 영역으로 나누어 살펴보고 잔향 모델, 즉 원하는 잔향 조건이 주어졌을 때 자연스러운 잔향을 얻기 위해 필요한 필터 설계 기준을 실제 청음 실험을 통하여 제시하고 있다.

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.931-942
• /
• 1999

This paper develops a 3 DOF vehicle model which includes lateral, roll and yaw motion to study a 4WS vehicle. The model is used for the simulation of a 4WS vehicle behavior, and to derive a control algorithm for rear wheel steering. This paper uses a feedforward plus feedback control scheme to compute a rear wheel steering angle. The feedforward control scheme for computing the first rear wheel steering angle uses a gain which is acquired by multiplying a proper value on a gain to maintain a zero sideslip angle. The feedback control scheme for computing the second rear wheel steering angle uses fuzzy logic and model following control scheme. A linear 2 DOF model is used as a reference model for model following control, and is derived from the developed 3 DOF model by neglecting sprung mass roll motion. A reference state variable is yaw rate, and is computed using the linear 2 DOF model. J-turn and lane change maneuver simulation are performed to show the effectiveness of the developed control scheme. The simulation results show that the 4WS vehicle with the developed control scheme has much better performance in yaw rate, lateral acceleration, roll angle, and sideslip angle than the 2WS vehicle. Also, the results show that the performance of the developed control is close to the one of an optimal control which assumes all states are perfect.

• 한국산업융합학회 논문집
• /
• 제25권4_2호
• /
• pp.655-662
• /
• 2022

Recently, with the increase in the use of UAV(unmanned aerial vehicles), research on horizontal maintenance stations that can take off and land in various environments has been actively conducted. These stations can safely land UAV through multiple DOF(degrees of freedom) or at least 2-DOF-based actuator actuation. Among them, many researchers are dealing with the multi-DOF stewart platform due to its high safety. However, the stewart platform requires high-precision control technology because it requires a lot of torque to actuate according to the load action. Therefore, in this paper, to solve the mentioned problem, a bevel gear-based 2-DOF horizontal maintenance station system is proposed. The proposed system is configured to prevent damage due to air resistance when maintaining ships and to install it in a small space. Also, in terms of system configuration, the bevel gear-based horizontal maintenance system has the main advantage of being able to take off and land UAVs of various sizes through the replacement of station pads. The driving of the system consists of a simple form that can control the motor by adjusting the rotation speed of the motor according to the sea waveform.

• 한국공작기계학회논문집
• /
• 제10권3호
• /
• pp.83-89
• /
• 2001

In this paper, we discuss the vibration suppression control of spatial redundant flexible manipulators through pseudo-inversed of Jacobian. In order to verify our method, the experiments are performed for PTP(Point To Point) motion of spa-tial flexible manipulators(1) with no redundancy(2) with one redundant DOF(degree of freedom). Finally, a comparison between these results is presented to show the performance of out approach.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.51.4-51
• /
• 2002

$\textbullet$ A noval haptic mouse system is developed for human computer interface. $\textbullet$ Five bar mechanism is adapted for 2 dof force feedback with virtual environment. $\textbullet$ Double prismatic joint type mechanism is adapted to reflect 1 dof grabbing force feedback. $\textbullet$ Cable driven mechansim is used for actuation to reduce backlash and endow backdrivability. $\textbullet$ Virtual wall perception experiment is conducted to obtain force specification for haptic mouse. $\textbullet$ Average mouse workspace is measured using magnetic position tracker.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.178-181
• /
• 1995

In this paper, on-line adaptive friction compensation scheme for the precise position control is presented. 2 DOF system with compliance and friction is used for the plant model. In order to reduce the calculation time for the parameter estimation, 1 DOF estimation model is used. The computer simulation and experimental results show the validity of the supposed scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.41-41
• /
• 2000

biped robots are expected to robustly traverse terrain with various unknown surfaces. The robot will occasionally encounter the unexpected events in made-for human environments. The slipping is a very real and serious problem in the unexpected events. The robot system must respond to the unexpected slipping after it has occurred and before control is lost. This paper proposes a reflex control method for biped robots to recover from slipage. Computer simulations with the 6-DOF environment model which consists of nonlinear dampers, nonlinear springs, and linear springs, show that the proposed method is effective in preventing fall-down due to slippage.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.83.2-83
• /
• 2001

This paper presents a new formulation approach to reduce computational burden of the direct kinematics of 6-dof haptic devices with three sets of a parallel-serial linkage. Their direct kinematics has been formulated through employing the Denavit-Hartenberg notation, which results in complicated formulation procedures and heavy computational burden. For reducing these problems, this paper reconfigures the haptic devices into an equivalent kinematic model of the 3-6 Stewart-Gough Platform that has three connecting joints on the moving platform. Moreover, the direct kinematics of the 3-6 Platform can be effectively formulated by using the proposed Tetrahedron Approach.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.853-859
• /
• 2015

진동대 실험 시 진동대와 구조물 사이에 발생하는 상호작용을 파악하기 위하여 1자유도 전단건물의 조화진동 실험을 전자기력으로 구동되는 힘-제어 진동대를 이용하여 수행하였다. 실험에서는 진동대와 전단건물의 수평방향 가속도를 측정하였으며, 실험 결과를 이해하기 위한 방법으로 전단건물의 진동대 실험을 조화하중이 작용하는 비구속 2자유도계로 이상화하였다. 이상화 된 이론모델의 운동방정식으로부터 전단건물과 진동대의 가속도를 구하였으며, 이들 가속도를 가진력에 대한 비로 나타낸 증폭계수와 진동대의 가속도 진폭에 대한 전단건물의 가속도 진폭의 비인 전달계수를 구하였으며, 이들 결과를 실험결과와 비교하여 진동대와 전단건물 사이에 발생하는 상호작용을 파악하였다.