• Review of Culture and Economy
• /
• v.20 no.2
• /
• pp.89-117
• /
• 2017

As the industrial paradigm shifts and the manufacturing industry declines, many changes also take place in the region as well. In this regard, interest in industrial heritage as a facet of cultural heritage is on the increase. In this paper, the meaning of regional 'cultural contents' as industrial heritage is investigated within the scope of specific region. It is meant to move beyond the viewpoint of considering industrial heritage as only relating to industrial machinery and relevant landmarks from the past. The concept of industrial heritage is established more clearly through the review policy and case study analysis of existing research; the analysis is conducted to investigate the characteristics associated with it, and then to explore how best to utilize it. In particular, this paper attempts to focus on how it operates within these parameters using a spatio-temporal context as much as possible, and concentrating on the recognition and experience of the subject of industrial heritage as being traceable through human story. This research is based on the case of 'Sapporo' which focuses on modern history based on historical importance, and the 'Cheongju' case study, which contrasts the former by focusing on urban regeneration using a spatial lens. This paper identifies the possibility of regional development through the examination of past identity and diversity in the present, and highlights the features that could be linked to future usability and development. In addition, it proposes the possibility that the cycle of regional development could change in the process of the different stages of territorialization, de-territorialization and re-territorialization.

• Korean Journal of Labor Studies
• /
• v.24 no.1
• /
• pp.157-196
• /
• 2018

This study analyzes non-standard workers' attitudes and behaviors towards standard workers' strikes using the case of a joint strike held by journalists at KBS and MBC in 2012. Tracing the process since 2008 by which a conservative government has tried to control the press and regular journalists have collectively resisted against it, we put our analytical focus on two major groups of freelance broadcast professionals: independent producers and writers in current affairs. Specifically, we examine 1) how they perceived and responded to a series of regular journalists' struggle to protect journalistic value, 2) how such perception of and response to regular journalists could be developed, and 3) how (de)solidarity could form and then deepened between freelance and regular journalists in the 2012 Media Strike. Our findings show that the ways in which regular journalists had controlled freelance journalists at work affected the relationship between class-based and occupation-based rationality freelance journalists held in their minds. Independent producers, who had developed a strong class-based rationality in response to the coercive input-output control, showed cynicism about regular journalists' strike pointing out their hypocrisy and contradiction. In contrast, freelance writers accommodated and joined the strike by regular workers in the spirit of solidarity based on occupational rationality which had developed from normative, process control. Our paper ends with theoretical and practical implications.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.9
• /
• pp.1373-1380
• /
• 2019

Objective: This study ascertained effects of cactus pear in association with different roughage in the diet of F1 Holstein/Zebu cows on intake, nutrient digestibility, nitrogen balance, ingestive behavior and performance. Methods: Eight cows with $72{\pm}11$ days of lactation were used. The experimental design was simultaneous in two $4{\times}4$ Latin squares. Four experimental diets were used: Diet 1, sorghum silage as exclusive roughage; Diet 2, sorghum silage associated with cactus pear in a proportion of 50% of the roughage (dry matter basis); Diet 3, elephant grass (Pennisetum purpureum cv. Roxo) as exclusive roughage; Diet 4, elephant grass associated with cactus pear in a proportion of 50% of the roughage. The roughage:concentrate ratio was 75:25. Results: Dry matter intake (p = 0.01) was higher with sorghum silage. There were differences in dry matter intake (p = 0.01), crude protein (p<0.01), ether extract (p = 0.01), non-fibrous carbohydrates (p<0.01) and total digestible nutrients (p = 0.01) among the diets. Cactus pear in the diet reduced water intake by 44.52% (p<0.01). The nitrogen balance was 59.71% and 27.49% lower in animals treated with exclusive sorghum silage and sorghum silage associated with cactus pear in relation to diets with elephant grass and elephant grass associated with cactus pear, respectively (p<0.01). The diets did not influence the milk production (p = 0.70), 3.5% fat corrected milk production (p = 0.72) or feed efficiency (p = 0.61). Conclusion: The association of cactus pear with sorghum or elephant grass silage does not alter milk production, reduces the intake of dry matter and water and improves the digestibility of nutrients.

• Korean Journal of Labor Studies
• /
• v.23 no.2
• /
• pp.109-139
• /
• 2017

In light that solidarity movements become significant under the situation of 'labor and labor movement' crisis, our study pays attention to the fact that the Hope Bus campaigns made remarkable achievements, and aims to figure out how those campaigns were successful, by focusing on their solidarity networking. The successful operating conditions of solidarity networking in the Hope Bus campaigns are examined in three aspects - the conditions of triggering, forming, and activating. The solidarity networking of Hope Bus campaigns were mainly triggered by the injustice of layoffs by Hanjin Heavy Industry, aerial protest by Jin-sook Kim, and the tragic symbol of the protest site (Crane no. 85). The solidarity movement of Hope Bus could be formed by the mutual trust and cohesive team-building of key network brokers, their utilization and expansion of social movement networks, and massive ripple effect of SNS-mediated communication. The solidarity networking of Hope Bus was effectively activated by open and de-hierarchical operations of the central planning group, active solidarity activities of participant groups, and the provision of 'heuristic experience' for developing the sensibility to labor solidarity. The virtuous combination of those three operating conditions leads to the building of unified forces among social movements, massive civil participation, and meaningful movement outcomes, through the solidarity networking of Hope Bus campaigns.

• The Korean Journal of Pain
• /
• v.34 no.3
• /
• pp.250-261
• /
• 2021

Background: Complex regional pain syndrome type I (CRPS-I) consists of disorders caused by spontaneous pain or induced by some stimulus. The objective was to verify the effects of photobiomodulation (PBM) using 830 nm wavelength light at the affected paw and involved spinal cord segments during the warm or acute phase. Methods: Fifty-six mice were randomized into seven groups. Group (G) 1 was the placebo group; G2 and G3 were treated with PBM on the paw in the warm and acute phase, respectively; G4 and G5 treated with PBM on involved spinal cord segments in the warm and acute phase, respectively; G6 and G7 treated with PBM on paw and involved spinal cord segments in the warm and acute phase, respectively. Edema degree, thermal and mechanical hyperalgesia, skin temperature, and functional quality of gait (Sciatic Static Index [SSI] and Sciatic Functional Index [SFI]) were evaluated. Results: Edema was lower in G3 and G7, and these were the only groups to return to baseline values at the end of treatment. For thermal hyperalgesia only G3 and G5 returned to baseline values. Regarding mechanical hyperalgesia, the groups did not show significant differences. Thermography showed increased temperature in all groups on the seventh day. In SSI and SFI assessment, G3 and G7 showed lower values when compared to G1, respectively. Conclusions: PBM irradiation in the acute phase and in the affected paw showed better results in reducing edema, thermal and mechanical hyperalgesia, and in improving gait quality, demonstrating efficacy in treatment of CRPS-I symptoms.

• Clean Technology
• /
• v.27 no.1
• /
• pp.61-68
• /
• 2021

Selective catalytic reduction (SCR) is widely used as a method of removing nitrogen oxide in large-capacity thermal power generation systems. Uniform mixing of the injected ammonia and the inlet flue gas is very important to the performance of the denitrification reduction process in the catalyst bed. In the present study, a computational analysis technique was applied to the ammonia injection system design process of a denitrification facility. The applied model is the denitrification facility of an 800 MW class coal-fired power plant currently in operation. The flow field to be solved ranges from the inlet of the ammonia injection system to the end of the catalyst bed. The flow was analyzed in the two-dimensional domain assuming incompressible. The steady-state turbulent flow was solved with the commercial software named ANSYS-Fluent. The nozzle arrangement gap and injection flow rate in the ammonia injection system were chosen as the design parameters. A total of four (4) cases were simulated and compared. The root mean square of the NH3/NO molar ratio at the inlet of the catalyst layer was chosen as the optimization parameter and the design of the experiment was used as the base of the optimization algorithm. The case where the nozzle pitch and flow rate were adjusted at the same time was the best in terms of flow uniformity.

• The Korean Journal of Applied Statistics
• /
• v.35 no.3
• /
• pp.407-419
• /
• 2022

The semiconductor fabrication process is complex and time-consuming. There are sometimes errors in the process, which results in defective die on the wafer bin map (WBM). We can detect the faulty WBM by finding some patterns caused by dies. When one manually seeks the failure on WBM, it takes a long time due to the enormous number of WBMs. We suggest a two-step approach to discover the probable pattern on the WBMs in this paper. The first step is to separate the normal WBMs from the defective WBMs. We adapt a hierarchical clustering for de-noising, which nicely performs this work by wisely tuning the number of minimum points and the cutting height. Once declared as a faulty WBM, then it moves to the next step. In the second step, we classify the patterns among the defective WBMs. For this purpose, we extract features from the WBM. Then machine learning algorithm classifies the pattern. We use a real WBM data set (WM-811K) released by Taiwan semiconductor manufacturing company.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1246-1246
• /
• 2001

The quality of meat is highly variable in many properties. This variability originates from both animal production and meat processing. At the pre-slaughter stage, animal factors such as breed, sex, age contribute to this variability. Environmental factors include feeding, rearing, transport and conditions just before slaughter (Hildrum et al., 1995). Meat can be presented in a variety of forms, each offering different opportunities for adulteration and contamination. This has imposed great pressure on the food manufacturing industry to guarantee the safety of meat. Tissue and muscle speciation of flesh foods, as well as speciation of animal derived by-products fed to all classes of domestic animals, are now perhaps the most important uncertainty which the food industry must resolve to allay consumer concern. Recently, there is a demand for rapid and low cost methods of direct quality measurements in both food and food ingredients (including high performance liquid chromatography (HPLC), thin layer chromatography (TLC), enzymatic and inmunological tests (e.g. ELISA test) and physical tests) to establish their authenticity and hence guarantee the quality of products manufactured for consumers (Holland et al., 1998). The use of Near Infrared Reflectance Spectroscopy (NIRS) for the rapid, precise and non-destructive analysis of a wide range of organic materials has been comprehensively documented (Osborne et at., 1993). Most of the established methods have involved the development of NIRS calibrations for the quantitative prediction of composition in meat (Ben-Gera and Norris, 1968; Lanza, 1983; Clark and Short, 1994). This was a rational strategy to pursue during the initial stages of its application, given the type of equipment available, the state of development of the emerging discipline of chemometrics and the overwhelming commercial interest in solving such problems (Downey, 1994). One of the advantages of NIRS technology is not only to assess chemical structures through the analysis of the molecular bonds in the near infrared spectrum, but also to build an optical model characteristic of the sample which behaves like the “finger print” of the sample. This opens the possibility of using spectra to determine complex attributes of organic structures, which are related to molecular chromophores, organoleptic scores and sensory characteristics (Hildrum et al., 1994, 1995; Park et al., 1998). In addition, the application of statistical packages like principal component or discriminant analysis provides the possibility to understand the optical properties of the sample and make a classification without the chemical information. The objectives of this present work were: (1) to examine two methods of sample presentation to the instrument (intact and minced) and (2) to explore the use of principal component analysis (PCA) and Soft Independent Modelling of class Analogy (SIMCA) to classify muscles by quality attributes. Seventy-eight (n: 78) beef muscles (m. longissimus dorsi) from Hereford breed of cattle were used. The samples were scanned in a NIRS monochromator instrument (NIR Systems 6500, Silver Spring, MD, USA) in reflectance mode (log 1/R). Both intact and minced presentation to the instrument were explored. Qualitative analysis of optical information through PCA and SIMCA analysis showed differences in muscles resulting from two different feeding systems.

• Journal of Ginseng Research
• /
• v.47 no.1
• /
• pp.44-53
• /
• 2023

Background: The genus Panax in the Araliaceae family has been used as traditional medicinal plants worldwide and is known to biosynthesize ginsenosides and phytosterols. However, genetic variation between Panax species has influenced their biosynthetic pathways is not fully understood. Methods: Simultaneous analysis of transcriptomes and metabolomes obtained from adventitious roots of two tetraploid species (Panax ginseng and P. quinquefolius) and two diploid species (P. notoginseng and P. vietnamensis) revealed the diversity of their metabolites and related gene expression profiles. Results: The transcriptome analysis showed that 2,3-OXIDOSQUALENE CYCLASEs (OSCs) involved in phytosterol biosynthesis are upregulated in the diploid species, while the expression of OSCs contributing to ginsenoside biosynthesis is higher in the tetraploid species. In agreement with these results, the contents of dammarenediol-type ginsenosides were higher in the tetraploid species relative to the diploid species. Conclusion: These results suggest that a whole-genome duplication event has influenced the triterpene biosynthesis pathway in tetraploid Panax species during their evolution or ecological adaptation. This study provides a basis for further efforts to explore the genetic variation of the Panax genus.

• Journal of Life Science
• /
• v.33 no.8
• /
• pp.623-631
• /
• 2023

This study was conducted to develop microsatellite markers in Parapristipoma trilineatum using next-generation sequencing. A total of 402,244,934 reads were generated on the Illumina Hiseq X Ten System, yielding 60,738,985,034 bp of sequences. The de novo assembly resulted in 1,320,995 contigs. A total of 952,326 contigs (0.016%) including 151 microsatellite loci were derived from the 1,320,995 contigs longer than 640 bp. A total of 34 primer sets were designed from the 151 microsatellite loci. As a result, 15 microsatellite loci were chosen and used for assuming population genetic parameters in the wild and farmed populations. The mean number of effective alleles was 12, ranging from 6 to 25. The observed heterozygosity (H_O) and the expected heterozygosity (H_E) ranged between 0.530 and 0.873, with an average of 0.750, and from 0.647 to 0.895, with an average of 0.793, respectively. According to these results, the developed set of 15 microsatellite markers is expected to be useful for the analysis of genetic characteristics in the population of P. trilineatum in Korea. There are requirements now for further genetic information, fishery resource management, breeding guidelines, support with the selection of breeds and studies on the effects of release, all of which will improve species conservation, and through future research, we aim to offer genetic foundational data with that goal.