• Journal of the Korean Geographical Society
• /
• v.41 no.2 s.113
• /
• pp.188-194
• /
• 2006

Three-dimensional topological data is essential for 3D modeling and application such as emergency management and 3D network analysis. This paper reviewed current 3D topological data model and developed a method to construct 3D topological node-relation data structure from 2D computer aided design (CAD) data. The method needed two steps with medial axis-transformation and topological node-relation algorithms. Using a medial-axis transformation algorithm, the first step is to extract skeleton from wall data that was drawn polygon or double line in a CAD data. The second step is to build a topological node-relation structure by converting rooms to nodes and the relations between rooms to links. So, links represent adjacency and connectivity between nodes (rooms). As a result, with the conversion method 3D topological data for micro-level sub-unit of each building can be easily constructed from CAD data that are commonly used to design a building as a blueprint.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.121-126
• /
• 2002

The stereoscopic image is that we can see it closer than a real thing compared to 2D image, and it has influence on human's vision information because it is more natural method to feel connections between the spaces of the image and himself. There are several method convert from 2d image to 3d image. But, in this paper, we are propose the image separate algorithm of continuous input system through a spatial analysis, not be done with 2D still image. Additionally, we will adapt to the moving vector which has been used in MPEG. In this experiment, we obtained the effect of 3D image.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.242-246
• /
• 2012

This paper presents an integrated low noise and highly linear wideband RF front-end for a digital terrestrial and cable TV tuner, which are used as a part of double-conversion TV tuner. The low noise amplifier (LNA) has a low noise figure and high linearity by adopting a noise canceling technique based on current amplification. The up-conversion mixer and SAW buffer have high linearity by employing a third order intermodulation cancellation technique. The proposed RF front-end is designed in a $0.18{\mu}m$ CMOS and draws 60 mA from a 1.8 V supply voltage. The RF front-end shows a voltage gain of 30 dB, an average single side-band noise figure of 4.2 dB, an IIP2 of 40 dBm, and an IIP3 of -4.5 dBm for the entire band from 48 MHz to 862Hz.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.894-898
• /
• 2007

Now a day, lots of the animations include TV series Animations are made by the technique of 3D Animation. However, 3D Animation obstructs visual elements and deteriorates an acquaintance with the limit of unfamiliar material methods and dispersion of light. For this reason, a large of number of 3D Animations are repacked with the style of 2D Animation. Most of previous studies for the conversion of output 3D Animation to the style of 2D Animation are analysis for 2D rendering techniques. In case of Non-realistic 3D Character Animation, first and foremost it needs investigation of the basic producing method for the 2D Animation is different with the realistic expression way of the one for the 3D animation. For a case study, expression methods for the non-realistic and the non-actuality 2D Character Animation come with impossible ways in the real life. This study for the 3D Animation with the style of 2D Animation is to investigate on the keynote for effective expression methods, when we turn 3D Animation into the style of 2D Animation.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.7
• /
• pp.625-630
• /
• 1995

α-Linked D-altropyranosidic derivatives were obtained by configurational change at C-3 of α-D-mannopyranosides as the key step in preparation of allyl and methyl α-D-glycopyranosides of 6-deoxy-D-altro-heptose. The manno-altro conversion was effected by sequential reactions of Swern oxidation and stereoselective borohydride reduction. Allyl 4,6-O-benzylidene-2-O-p-methoxybenzyl-α-D-mannopyranoside was transformed to the corresponding altropyranoside via 3-oxo-arabino-hexopyranoside. Allyl 7-O-benzyl-6-deoxy-3,4-O-isopropylidene-α-D-altro-heptopyranoside has been prepared as a glycosyl acceptor to be coupled with β-D-GlcpNAc-(1→3)-α-D-Galp glycosyl donor for the synthesis of an O-antigen repeating unit of Campylobacter jejuni serotypes O:23 and O:36. Stereoselective borohydride reduction also succeeded in yielding methyl 2,4,7-tri-O-benzyl-6-deoxy-α-D-altro-heptopyranoside from the corresponding 3-oxo-α-D-arabino-heptopyranoside. C-6 Homologation was achieved by sequential reactions of cyanide displacement of 6-sulphonates, reduction of the resulting heptopyranosidurononitrile with diisobutylaluminum hydride, hydrolysis of the imine, and further reduction with sodium borohydride.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.8
• /
• pp.10-21
• /
• 1999

This paper describes a 12bit CMOS current cell matrix D/A converter which shows a conversion rate of 65MHz and a power supply of 3.3V. Designed D/A converter utilizes current cell matrix structure with good monotonicity characteristic and fast settling time, and it is implemented by using the tree structure bias circuit, the symmetrical routing method with ground line and the cascode current switch to reduce the errors of the conventional D/A converter caused by a threshold voltage mismatch of current cells and a voltage drop of the ground line. The designed D/A converter was implemented with a $0.6{\mu}m$ CMOS n-well technology. The measured data shows a settling time of 20ns, a conversion rate of 50 MHz and a power dissipation of 35.6mW with a single power supply of 3.3V. The experimental SNR, DNL, and INL of the D/A converter is measured to be 55dB, ${\pm}0.5LSB$, and ${\pm}2LSB$, respectively.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.3
• /
• pp.97-105
• /
• 2007

This study was conducted to compare the performances of acidogenic fermentation and hydrogen fermentation using bench-scale leaching-bed reactors for organic solid waste. Acidogenic fermenters were operated with dilution rates (D) of 2.0, 3.0 and $4.0d^{-1}$ after employing anaerobic sludge and hydrogen fermenters were operated with D of 2.0, 4.0 and $6.0d^{-1}$ after employing heat-treated anaerobic sludge. The highest chemical oxygen demand (COD) conversion efficiency (56.2%) was obtained in acidogenic fermentation with D of $3.0d^{-1}$. Only volatile fatty acid (VFA) was produced as a metabolite. On the other hand, hydrogen fermentation did not show higher COD conversion efficiency (49.3%) than acidogenic fermentation, but it produced hydrogen gas (5.1% of total COD) which was a clean and environmentally friendly fuel with a high energy yield. Therefore, either acidogenic fermentation or hydrogen fermentation could be applied to organic solid waste depending on the purpose of treatment, which could maximize the economics of anaerobic treatment.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1289-1294
• /
• 2010

Novel $H_8$-binaphthol-based chiral receptors appended with an uryl moiety (2a) and a guanidinium moiety (2b) have been designed and synthesized for the enantioselective recognition of 1,2-amino alcohols via reversible imine formation. The selectivities ($K_R/K_S$ = 9.8 ~ 19.4) of 2b in imine formation with 1,2-amino alcohols are higher than those of 2a ($K_R/K_S$ = 1.8 ~ 4.5). Similar efficiency trend have been observed in the conversion of L-amino acids to D-amino acids, i.e., the efficiency of the receptor 2b (D/L ratio: 4.3 ~ 10.1) is superior to 2a (D/L ratio: 4.0 ~ 8.7).

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.2
• /
• pp.246-251
• /
• 2014

In this paper, a high-speed CMOS Image Sensor (CIS) based on a 10-bit two step Single Slope A/D Converter (SS-ADC) is proposed. The A/D converter is composed of both 5-bit coarse ADC and a 6-bit fine ADC, and the conversion speed is 10 times faster than that of the single-slope A/D convertor. In order to reduce the pixel noise, further, a Hybrid Correlated Double Sampling (H-CDS) is also discussed. The proposed A/D converter has been fabricated with 0.13um 1-poly 4-metal CIS process, and it has a QVGA ($320{\times}240$) resolution. The fabricated chip size is $5mm{\times}3mm$, and the power consumption is about 35 mW at 3.3 V supply voltage. The measured conversion speed is 10 us, and the frame rate is 220 frames/s.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.3
• /
• pp.51-57
• /
• 2010

A dual-mode direct conversion receiver is developed in $0.13\;{\mu}m$ RF CMOS process for IEEE 802.11n based wireless LAN and IEEE 802.16e based mobile WiMAX application. The RF receiver covers the frequency band between 2.3 and 2.7 GHz. Three-step gain control is realized in LNA by using current steering technique. Current bleeding technique is applied to the down-conversion mixer in order to lower the flicker noise. A frequency divide-by-2 circuit is included in the receiver for LO I/Q differential signal generation. The receiver consumes 56 mA at 1.4 V supply voltage including all LO buffers. Measured results show a power gain of 32 dB, a noise figure of 4.8 dB, a output $P_{1dB}$ of +6 dBm over the entire band.