• Journal of Photoscience
• /
• v.3 no.1
• /
• pp.23-28
• /
• 1996

To investigate the structure and function of photosystem I, cartridge mutagenesis technique was used to inactivate the psaB gene of photosystem I. From the screen, many strains which have potential defects in photosystem I were generated. Biochemical analysis revealed that B2, one of the mutant, had a reduced amount of chlorophyll. Electron transfer activitx from photosystem II to photosystem I as oxygen uptake was the rate of 64 % of wild type. Also B2 showed a decreased photosystem I activity when measured by 77 K fluorescence emission spectrum. Particularly, immunodetection analysis showed that the B2 had reduced amount of PsaA/PsaB, but a normal range of PsaC and PsaD. Here we present a photoheterotrophic mutant for psaB gene as a unique model strain for future study of structural/functional relationship and biogenesis of photosystem I.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.781-786
• /
• 1998

Since a gas turbine is still a significant contributor to peak time, it is very important to tune the gains of P. I. D to get a maximum power and stability within permissible limits. In the gas turbine, the main control loop must adjust the fuel flow to ensure the correct output power and frequency. but it is not easy, because the control loop is composed of many subsystems. In this paper we acquire a transfer function based on the operations data of Gun-san gas turbine and study to apply a loop compensation type 2-DOF PID controller tuning by neural-network to control loop of gas turbine to reduce phenomena caused by integral and derivative actions through simulation. We obtained satisfactory results to disturbances of subcontrol loop such as, fuel flow, air flow, turbine extraction temperature.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.213-216
• /
• 2000

본 논문에서는 volume rendering 기법을 이용하여 2차원 MRI 영상들을 합성하여 3차원 영상 만들 때 보다 해상도를 높이기 위한 개선된 sampling방법을 소개한다 2차원 슬라이스 영상들이 3차원으로 재구성할 때 voxel 기반으로 렌더링을 하기 때문에 오브젝트의 내부 영역까지도 볼 수 있는 것이 volume rendering의 가장 큰 장점이다. 따라서 영상을 재구성하는 과정에서 보다 향상된 interpolation을 적용시켜서 공간 해상도를 향상시키면 보다 명확하게 오브젝트 내부 정보를 살펴 볼 수 있다. 본 논문에서는 nearest neighbor 이나 linear 같은 interpolation으로 sampling한 방법보다 cubic interpolation을 3차원 공간에서 적용 시켜서 보다 resampling이 잘 되도록 하여 해상도를 향상시켜 보았다. 이렇게 향상된 Interpolation 적용시켜서 렌더링할 때 얼마나 오브젝트 내부 영역이 잘 가시화가 되었는지 transfer function을 적용시켜서 오브젝트 내부 정보를 렌더링 해보았고, 임의의 축으로 오브젝트을 잘라서 2D 단면 영상으로 출력해 보았다. 보다 향상된 interpolation을 적용시켜서 resampling을 하면 영상 해상도가 개선되었음을 볼 수 있었다.

• Korean Journal of Food Science and Technology
• /
• v.21 no.2
• /
• pp.307-312
• /
• 1989

Internal mass transfer during osmotic dehydration of carrots in sugar solutions was examined as a function of concentration, temperature and immersion time of those solutions using moisture loss, sugar gain, molality and rate parameter. Influence of osmotic dehydration and blanching on browning reaction of vacuum dried carrots(3% MC: wet basis) was also evaluated. Increasing the concentration and temperature of sugar solutions increased moisture loss, sugar gain, molality and rate parameter. Water loss and sugar gain were rapid in first 4 min and then levelled off. The rate of sugar gain and molality changes on temperature was significant in lower concentration$(20^{\circ}\;Brix)$ compared to higher concentration$(60^{\circ}\;Brix)$. The changes of rate parameter were affected by concentration than by temperature of sugar solutions. Moisture loss during osmotic dehydration using a sugar solution $(60^{\circ}\;Brix,\;80^{\circ}C)$ with 20min immersion time was 55.7%. Effect of osmotic dehydration and blanching before vacuum dried to 3% MC(Wet basis) on browning reaction was significant. Minimum browning reaction during vacuum drying was carried out using pretreatments such as osmotic dehydration in sugar solution$(40^{\circ}\;Brix,\;80^{\circ}C)$ with 16 min immersion time(O.D.=0.09) and blanching with 12 min immersion time at $80^{\circ}C$(O.D.=0.31) compared to control(O.D.=1.59).

• Journal of the Korean Society of Radiology
• /
• v.16 no.4
• /
• pp.395-403
• /
• 2022

Flat-panel detector (FPD) used in digital radiographic imaging systems was used to perform a quantitative power spectrum evaluation as a result of the thickness change of polymethyl methacrylate (PMMA), a tissue equivalent. As the PMMA thickness increases with the resolution-chart phantom image, the effect of the scattering line increases, indicating that the modulation characteristics decrease, and the image is bright. The results show that the noise of the image increases, and noise-power spectral images are obtained by Fourier transform to confirm by spatial frequency. Thus, it can be verified that the PMMA thickness and noise are proportional through the result of evaluating the change of resolution characteristics and representing the 2D noise-power spectrum as one-dimensional values by evaluating the change of scattering line with MTF as the PMMA thickness increases in the image.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11b
• /
• pp.134-139
• /
• 2005

This paper presents a robust design of vehicle interior noise using Taguchi method and a substructure synthesis method with a hybrid model. Firstly, the proposed method identifies the critical process of the concerned interior noise through a TPA (Transfer Path Analysis). Secondly, a strategy for a robust design is discussed, in which the major noise factor among uncertainties in the process is quality distribution of rubber bushes connecting a cradle and a trimmed body. Thirdly, a virtual test model fer the process is developed by applying a substructure synthesis method with a hybrid modeling approach. Fourthly, virtual tests are carried out according to the predefined tables of orthogonal array in Taguchi robust design process. The process was performed under 2 sub-steps. The first step is sensitivity analysis of 31 panels, and the other step is weight optimization of mass dampers on sensitive panels. Finally, two vehicles with the proposed countermeasures were validated. The proposed method reduces 87.5% of trials of measurements due to the orthogonal arrays and increases robustness by 8.6dB of S/N ratio and decreases $5\;dB(A){\sim}10\;dB(A)$ of interior noise in the concerned range of RPM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.11
• /
• pp.2147-2159
• /
• 1994

In this parper, the performance of trellis coded DS/SSMA system using feedforward trellis encoder with sasymmetric signal constellation are evaluated over AW(In channel. The numerical results of trellis coded 4 PSK(code rate 1/2)and 8-PSK(code rate2/3) are calculated for 2-state and 4-state cases and compared with those of the Boudreau's system using feedback trellis encoder without optimizing the signal constellation. The method of moments is employed to evaluate the multiple access interference, in conjunction with the generalized transfer function techniques for trellis code. The numerical results show that the proposed system in this paper is always better than the Boudreau's system over AWGN channel; particularly at $P_b:10$, $0.2dB\sim2.4dB$ improvement over AWGN channel are obtained.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.76.2-76.2
• /
• 2012

The understanding spectral characterization of possible earth-like extra solar planets has generated wide interested in astronomy and space science. The technical central issue in observation of exoplanet is deconvolution of the temporally and disk-averaged spectra of the exoplanets. The earth model based on atmospheric radiative transfer method has been studied in recent years for solutions of characterization of earthlike exoplanet. In this study, we report on the current progress of the new method of 3D earth model as a habitable exoplanet. The computational model has 3 components 1) the sun model, 2) an integrated earth BRDF (Bi-directional Reflectance Distribution Function) model (Atmosphere, Land and Ocean) and 3) instrument model combined in ray tracing computation. The ray characteristics such as radiative power and direction are altered as they experience reflection, refraction, transmission, absorption and scattering from encountering with each all of optical surfaces. The Land BRDF characteristics are defined by the semi-empirical "parametric-kernel-method" from POLDER missions from CNES. The ocean BRDF is defined for sea-ice cap structure and for the sea water optical model, considering sun-glint scattering. The input cloud-free atmosphere model consists of 1 layers with vertical profiles of absorption and aerosol scattering combined Rayleigh scattering and its input characteristics using the NEWS product in NASA data and spectral SMARTS from NREL and 6SV from Vermote E. The trial simulation runs result in phase dependent disk-averaged spectra and light-curves of a virtual exoplanet using 3D earth model.

• Current Optics and Photonics
• /
• v.5 no.2
• /
• pp.141-146
• /
• 2021

We have evaluated the suppression effect of atmospheric-turbulence-induced optical scintillation in terrestrial free-space optical (FSO) communication systems using a gain-saturated erbium-doped fiber amplifier (EDFA). The variation of EDFA output signal power has been measured with different amounts of gain saturation and modulation indices of the optical input signal. From the measured results, we have found that the peak-to-peak power variation was decreased drastically below 2 kHz of modulation frequency, in both 3-dB and 6-dB gain compression cases. Then, the power spectral density (PSD) of optical scintillation has been calculated with Butterworth-type transfer function. In the calculation, different levels of atmospheric-turbulence-induced optical scintillation have been taken into account with different values of the Butterworth cut-off frequency. Finally, the suppression effect of optical scintillation has been estimated with the measured frequency response of the EDFA and the calculated PSD of the optical scintillation. From our estimated results, the atmospheric-turbulence-induced optical scintillation could be suppressed efficiently, as long as the EDFA were operated in a deeply gain-saturated region.

• Structural Engineering and Mechanics
• /
• v.88 no.6
• /
• pp.521-533
• /
• 2023

In the present study, the finite volume method is applied for the thermal performance prediction of the natural ventilation system using vertical solar chimney whereas, design parameters are optimized through the response surface methodology (RSM). The computational simulations are performed for various parameters of the solar chimney such as absorber temperature (40≤T_abs≤70℃), inlet temperature (20≤T₀≤30℃), inlet height of (0.1≤h≤0.2 m) and chimney width (0.1≤d≤0.2 m). Analysis of variance (ANOVA) was carried out to identify the design parameters that influence the average Nusselt number (Nu) and mass flow rate (ṁ). Then, quadratic polynomial regression models were developed to predict of all the response parameters. Consequently, numerical and graphical optimizations were performed to achieve multi-objective optimization for the desired criteria. According to the desirability function approach, it can be seen that the optimum objective functions are Nu=25.67 and ṁ=24.68 kg/h·m, corresponding to design parameters h=0.18 m, d=0.2 m, T_abs=46.81℃ and T₀=20℃. The optimal ventilation flow rate is enhanced by about 96.65% compared to the minimum ventilation rate, while solar energy consumption is reduced by 49.54% compared to the maximum ventilation rate.