• Geophysics and Geophysical Exploration
• /
• v.22 no.3
• /
• pp.99-106
• /
• 2019

Resistivity method has been used for the dam safety inspection and, for the convenience of fieldwork, two-dimensional (2D) resistivity data has been usually measured along the dam crest. However, since the dam has three-dimensional (3D) structure, 2D resistivity survey along the dam crest violates 2D assumption and 3D effects caused by 3D topography and material properties in the dam distort the inversion result of 2D resistivity data acquired along the dam crest. Furthermore, it is really hard to evaluate the 3D structure of the dam and 3D leakage pathway using 2D resistivity survey because 2D resistivity survey can provide only 2D resistivity section beneath the survey line. In this study, 3D resistivity survey was conducted at a dam in Korea. By comparing the results from 3D and 2D resistivity surveys, merit and demerits of 3D survey were investigated. Finally, it was confirmed that 3D survey can provide more accurate information about the dam status and 3D leakage pathway compared to the 2D survey. Therefore the 3D resistivity survey should be actively expanded for more accurate dam safety inspection even though more time and expense are required.

• Journal of the Korean earth science society
• /
• v.30 no.6
• /
• pp.699-708
• /
• 2009

Recently as the interest in the development of domestic ore deposits has increased, we can easily find some studies on exploration geophysics-based ore-deposit survey in literature. Based on the fact that mineralized zone are generally more conductive than surrounding media, electrical resistivity survey among several geophysical surveys has been applied to investigate metallic ore deposits. Most of them are grounded on 2-D survey. However, 2-D inversion may lead to some misinterpretation for 3-D geological structures. In this study, we investigate the feasibility of the 3-D electrical resistivity survey to 3-D vein-type ore deposits. We first simulate 2-D dipole-dipole survey data for survey lines normal to the strike and 3-D pole-pole survey data, and then perform 3-D inversion. For 3-D ore-body structures, we assume a width-varying dyke, a wedge-shaped, and a fault model. The 3-D inversion results are compared to 2-D inversion results. By comparing 3-D inversion results for 2-D dipole-dipole survey data to 3-D inversion results for 3-D pole-pole survey data, we could note that the 2-D dipole-dipole survey data yield better inversion results than the 3-D pole-pole data, which is due to the main characteristic of the pole-pole array. From these results, we are convinced that if we have certain information on the direction of the strike, it would be desirable to apply 2-D dipole-diple survey for the survey lines normal to the strike. However, in most cases, we do not have any information on the direction of the strike, because we already developed the ore deposit with the outcrops and the remaining ore deposits are buried under the surface. In that case, performing 3-D pole-pole electrical resistivity survey would be a reasonable choice to obtain more accurate interpretation on ore body structure in spite of low resolution of pole-pole array.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2000.09a
• /
• pp.41-53
• /
• 2000

Electrical resistivity survey is widely applied to the dam seepage problems. Main purpose of the resistivity survey is to delineate the inhomogeneity in the dam. In this study, two- (2-D) and three-dimensional (3-D) resistivity survey methodology and corresponding interpretations of the data have been analyzed using 3-D resistivity modeling results. Since resistivity structures beneath the dam and its shape are 3-D in nature, we could get more accurate image of the dam structures using 3-D survey compared to 2-D survey even though we cannot employ the grid-shape survey layout.

• Nutrition Research and Practice
• /
• v.14 no.6
• /
• pp.667-678
• /
• 2020

BACKGROUND/OBJECTIVES: This study aimed to improve portion size estimation aids (PSEAs) used in the nutrition survey of the Korea National Health and Nutrition Examination Survey (KNHANES) and validate the accuracy and precision of the newly developed aids. SUBJECTS/METHODS: We conducted intensive interviews with survey experts in KNHANES and consulted with experts to collect opinions about improvement of PSEAs. Based on the results of the interviews, 5 types of PSEAs (rice bowl, earthen pots, mounds, measuring spoons, and thickness sticks) were newly developed using 3-dimensional (3D) modeling or modification of color or shape. Validation tests were conducted with 96 adults 20 years old or older. For the rice bowl and earthen pots, the participants were asked to select the more similar PSEA in size after being shown the real dishes. For the mounds, measuring spoons, and thickness sticks, the participants were presented with actual plates of food and asked to estimate the given portion sizes using the given PSEAs. RESULTS: The improved 2-dimensional (2D) picture aid for the rice bowl reflecting the size distortion by angle of view using 3D modeling was perceived more closely to the actual size than the current 2D picture (P < 0.001). The change of the color of 2D pictures and 3D models, the change of shape of the measuring spoons, and the 3-dimensionalization of the 2D mounds had no significant improvement in the subjects' perception. CONCLUSIONS: The currently used 2D PSEAs need to be fully redesigned using 3D modeling to improve subjects' perception. However, change of color or shape will not be necessary. For amorphous foods, it is suggested that more evaluation be performed before reaching a final conclusion in the use of PSEAs, or alternative ways to improve accuracy of estimation need to be explored.

• Journal of Korea Technology Innovation Society
• /
• v.5 no.2
• /
• pp.228-244
• /
• 2002

The survey of research and development (R&D) in science and technology (S&T) covers the current status of R&D activities in S&T in Korea, and provides a basis for decision making regarding S&T policy. Continuous improvement of the survey is widely needed to present reliable national basic statistics. Therefore, the purpose of the study is two-fold: to introduce sampling survey method in industrial sector and to make statistical technique to deal with non-response data from industrial sector. To these ends, first, case studies of the United States and Japan are illustrated. A new sampling design for the R&D survey is proposed and implementing stratified random sampling scheme is suggested. Moreover, statistical analysis of the non-response data is dealt with. Based on several screening criteria, we develop a new imputation method suitable for the R&D survey and also provide more detailed implementation plan. Various solutions to a problem arising from non-response item are also presented. Finally, some implications of the results are discussed.

• Journal of Korean Society of Transportation
• /
• v.4 no.2
• /
• pp.37-58
• /
• 1986

Since 1960's there have been conducted quite numbers of origin and destination (0-D) surveys in Korea, Most of them, however, were to be said not so successful. In this paper, it was investigated that why the previous 0-D surveys were failed, and that how it could be improved. The findings of this study are: 1. The collection of sample data itself was performed relatively well, but the problem was in the improper expansion methods which were applied. 2. To improve the expansion methods, it should be performed not only the dwelling unit-based sample surveys but also commercial vehicle survey, cordon line survey, screen line counts and other auxiliary travel surveys like transit patronage survey, vehicle miles survey etc. at the same time. 3. To expand the sample surveyed data in a proper way, the adjustment factors should take a disaggregate form and also should be applied not to the specific trips, but to the specific trip makers to avoid the bias which could be caused by the application of adjustment factors in a way that has been used previously. 4. If there is no considerable change in travel patterns, we can synthesize the present 0-D data with past surveyed sample data, using present statistic data in the same way which was developed in this paper when expanding and adjusting sample data.

• Journal of the Korean Institute of Rural Architecture
• /
• v.21 no.4
• /
• pp.25-36
• /
• 2019

The purpose of the study is to analyze how to document survey and repair data on wooden architecture culture assets. Documentation was analyzed in comparison to digital developments from the past to the present. Although the accuracy of survey equipment has been improved by digital development, survey drawing has not changed. For example, a 3D Scanner, survey equipment, was introduced but is being used for conversion into 2D data. Data provided by the drawing included in the survey and repair reports were not accumulated. As it stands, it is inaccessible and disorganized. Data generated from the survey, repair, and maintenance has to be consistent. A BIM system was proposed to integrate information on wooden architecture cultural assets.

• Journal of Biosystems Engineering
• /
• v.29 no.2
• /
• pp.175-186
• /
• 2004

The study was designed to forecast and derive future core technologies using Delphi method in Korea agriculture. The technologies will make agriculture for core and strategic industry that has high value-added in 21 century. Questions were given to specialists by each technology in order to survey importance, realization time, level of R＆D in Korea and foremost country, leading group of R＆D, effective policy, etc. for each technology. The target of the survey for Delphi is confined specialists in the area of Bioystems Engineering. 55 core technologies were derived and 31 specialists answered the survey.

• Nutrition Research and Practice
• /
• v.3 no.4
• /
• pp.286-294
• /
• 2009

This study aimed to identify risk factors for type 2 diabetes (T2D) in Korea, a rapidly changing country. Data of 5,132 adults aged 20-85 were used from the 2001 Korean Health and Nutrition Examination Survey. Multiple logistic regression was carried out to identify risk factors for T2D. Three models were specified: (i) socioeconomic and demographic factors (model 1: age, gender, education, poverty income ratio, employment), (ii) behavioral risk factors and covariates (model 2: obesity, physical activity, smoking, alcohol drinking, dietary quality, family history of T2D, co-morbidity) and (iii) socioeconomic, demographic, and behavioral factors (model 3). The prevalence of T2D was 7.4%. Less education (OR 1.41, 95% CI 1.08-1.84), age (OR 2.19, 95% CI 1.56-3.08 in 40-59 yrs, OR 4.05, 95% CI 2.76-5.95 in 60 yrs + comparing to 20-39 yrs) and abdominal obesity (OR 2.24, 95% CI 1.79-2.82) were risk factors for T2D even after controlling for other factors simultaneously. There was a significant association of T2D with ever smoking (OR 1.34, 95% CI 1.06-1.67). The relationship of age with T2D was modified by gender in model 1 and the relationship of smoking with T2D was modified by obesity in model 2. Less educated, older, obese or ever smokers were more likely to have T2D. Gender mediated the relationship of age, and obesity mediated the relationship of smoking, with T2D. Intervention programs for T2D in Korea should take the interactions among risk factors into account.

• Science of Emotion and Sensibility
• /
• v.13 no.4
• /
• pp.659-668
• /
• 2010

This paper examines users' emotion from both 2D and 3D web interfaces and finds their differences. First, 77 words representing users' emotion were collected from the previous research papers. Second, a web survey system was developed using these collected words and prepared 3 web interface prototypes to collect users' emotions from different types of web interfaces. Finally, a web survey was conducted and its results were analyzed. The result of the survey showed that there were emotional words that were commonly experienced from either 2D or 3D web interfaces. However, it also showed that there were emotional differences between 2D and 3D web interface; 3D web interfaces provide users with specific emotional experiences because of their own characteristics - depth and dynamic movement. It is believed that the words collected from the survey could be the criteria to evaluate the quality of the 3D web interfaces and encourage the research on users' emotion from 3D interfaces.