• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.12
• /
• pp.1725-1731
• /
• 2002

The distribution and activities of hydrolytic enzymes (cellulolyti, hemicellulolytic,pectinolytic and others) in the rumen compartments of Hereford bulls fed 100% alfalfa hay based diets were evaluated. The alfalfa proportion in the diet was gradually increased for two weeks. Whole rumen contents were processed into four fractions: Rumen contents including both the liquid and solid fractions were homogenized and centrifuged, and the supernatant was assayed for enzymes located in whole rumen contents (WRE); rumen contents were centrifuged and the supernatant was assayed for enzymes located in rumen fluids (RFE); feed particles in rumen contents were separated manually, washed with buffer, resuspended in an equal volume of buffer, homogenized and centrifuged and supernatant was assayed for enzymes associated with feed particles (FAE); and rumen microbial cell fraction was separated by centrifugation, suspended in an equal volume of buffer, sonicated and centrifuged, and the supernatant was assayed for enzymes bound with microbial cells (CBE). It was found that polysaccharide-degrading proteins such as $\beta$-1,4-D-endoglucanase, $\beta$-1,4-D-exoglucanase, xylanase and pectinase enzymes were located mainly with the cell bound (CBE) fraction. However, $\beta$-D-glucosidase, $\beta$-D-fucosidase, acetylesterase, and $\alpha$-L-arabinofuranosidase were located in the rumen fluids (RFE) fraction. Protease activity distributions were 37.7, 22.1 and 40.2%, and amylase activity distributions were 51.6, 18.2 and 30.2% for the RFE, FAE and CBE fractions, respectively. These results indicated that protease is located mainly in rumen fluid and with microbial cells, whereas amylase was located mainly in the rumen fluid.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.3
• /
• pp.285-291
• /
• 2022

In order to use the liquid rocket fuel, 1,5-diamino-4-methyltetrazolium azide, [DMT]⁺[N₃]^- and 1,5-diamino-4-methyltetrazolium cyanide, [DMT]⁺[CN]^- were synthesized and prepared the ionic liquid rocket fuel after dissolving the synthesized solid-type energetic chemicals in hydrazine, respectively. The thermal decomposition temperatures(T_d) and densities(d) of the prepared ionic liquid rocket fuels were about 200 ℃ and above 1.0 g/cm³ respectively. The ignition delay times(I_dt) of the ionic liqud rock fuels with [DMT]⁺[N₃]^- and [DMT]⁺[CN]^- were in a range of 26.6 - 82.5 ms and the 44.0 - 98.5 ms, respectively. These results mean that the synthesized tetrazolium salts could be used as an ionic liquid rocket fuels. The viscosities of the ionic liqud rock fuels with [DMT]⁺[N₃]^- and [DMT]⁺[CN]^-, which were dissolved in mixture solution of hydrazine/2-hydroxyethylhydrazine were to be 1.34 - 101 cP, and 1.29 - 80.5 cP, respectively. The synthesized ionic liquid rocket fuels in this study could be used as rocket fuel because the [I_dt(100 ms or less), T_d(150 ℃ or more), d(1.00 g/cm³ or more), and η(40.0~ 100 cP)] were achieved to satisfy the range of the used liquid rocket fuels.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.537-540
• /
• 1992

This paper presents Samsung CNC (Computer Numerical Controller) system with an intel 80486/487 as the main CPU and a 32 bit floating point DSP(Digital Signal Processor) TMS320C30 as the motion control CPU. The Samsung CNC system diverse user-frienly characteristics such as multi-tasking, powerful menu system, internal PLC system, and 2/3 dimensional graphics in wire and solid mode. The main CPU executes central processing program, user interface program, interpreter, BMI, etc while the motion control CPU carries out some interpolations, acceleration/deceleration, and PID control algorithm with feedforward terms. Complex interpolations except linear and circular ones are performed on the main control CPU. The experimental results for the circular interpolation under linear acceleration/deceleration shows that the proposed CNC system can be widely used in controlling machining centers with good machining accuracy.

• Journal of Korean Neurosurgical Society
• /
• v.67 no.2
• /
• pp.166-176
• /
• 2024

Objective : Three-dimensional (3D) printing in vascular surgery is trending and is useful for the visualisation of intracranial aneurysms for both surgeons and trainees. The 3D models give the surgeon time to practice before hand and plan the surgery accordingly. The aim of this study was to examine the effect of preoperative planning with 3D printing models of aneurysms in terms of surgical time and patient outcomes. Methods : Forty patients were prospectively enrolled in this study and divided into two groups : groups I and II. In group I, only the angiograms were studied before surgery. Solid 3D modelling was performed only for group II before the operation and was studied accordingly. All surgeries were performed by the same senior vascular neurosurgeon. Demographic data, surgical data, both preoperative and postoperative modified Rankin scale (mRS) scores, and Glasgow outcome scores (GOS) were evaluated. Results : The average time of surgery was shorter in group II, and the difference was statistically significant between the two groups (p<0.001). However, no major differences were found for the GOS, hospitalisation time, or mRS. Conclusion : This study is the first prospective study of the utility of 3D aneurysm models. We show that 3D models are useful in surgery preparation. In the near future, these models will be used widely to educate trainees and pre-plan surgical options for senior surgeons.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.156-156
• /
• 2000

Recently, the surface electronic states have attracted much attention since their standing wave patterns created around steps, defects, and adsorbates on noble metal surfaces such as Au(111), Ag(110), and Cu(111) were observed by scanning tunneling microscopy (STM). As a typical example, a striking circular pattern of "Quantum corral" observed by Crommie, Lutz, and Eigler, covers a number of text books of quantum mechanics, demonstrating a wavy nature of electrons. After the discoveries, similar standing waves patterns have been observed on other metal and demiconductor surfaces and even on a side polane of nano-tubes. With an expectation that the surface states could be utilized as one of ideal cases for studying two dimensionakl (sD) electronic system, various properties, such as mean free path / life time of the electronic states, have been characterized based on an analysis of standing wave patterns, . for the 2D electron system, electron density is one of the most importnat parameters which determines the properties on it. One advantage of conventional 2D electron system, such as the ones realized at AlGaAs/GaAs and SiO2/Si interfaces, is their controllability of the electrondensity. It can be changed and controlled by a factor of orders through an application of voltage on the gate electrode. On the other hand, changing the leectron density of the surface-state 2D electron system is not simple. On ewqy to change the electron density of the surface-state 2D electron system is not simple. One way to change the electron density is to deposit other elements on the system. it has been known that Pd(111) surface has unoccupied surface states whose energy level is just above Fermi level. Recently, we found that by depositing Pd on Cu(111) surface, occupied surface states of Cu(111) is lifted up, crossing at Fermi level around 2ML, and approaches to the intrinsic Pd surface states with a increase in thickness. Electron density occupied in the states is thus gradually reduced by Pd deposition. Park et al. also observed a change in Fermi wave number of the surface states of Cu(111) by deposition of Xe layer on it, which suggests another possible way of changing electron density. In this talk, after a brief review of recent progress in a study of standing weaves by STM, I will discuss about how the electron density can be changed and controlled and feasibility of using the surface states for a study of 2D electron system. One of the most important advantage of the surface-state 2D electron system is that one can directly and easily access to the system with a high spatial resolution by STM/AFM.y STM/AFM.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.11
• /
• pp.764-770
• /
• 2014

This study assessed analysis of N-nitrosamines by separation, identification, and quantification using a gas chromatography (GC) mass spectrometer (MS) with electron impact (EI) mode. Samples were pretreated by a automated solid phase extraction (SPE) and a nitrogen concentration technique to detect low concentration ranges. The analysis results by EI-GC/MS (SIM) and EI-GC/MS/MS (MRM) on standard samples with no pretreatment exhibited similar results. On the other hand, the analysis of pretreated samples at low concentrations (i.e. ng/L levels) were not reliable with a EI-GC/MS due to the interferences from impurity peaks. The method detection limits of eight (8) N-nitrosamines by EI-GC/MS/MS analysis ranged from 0.76 to 2.09 ng/L, and the limits of quantification ranged from 2.41 to 6.65 ng/L. The precision and accuracy of the method were evaluated using spiked samples at concentrations of 10, 20 and 100 ng/L. The precision were 1.2~13.6%, and the accuracy were 80.4~121.8%. The $R^2$ of the calibration curves were greater than 0.999. The recovery rates for various environmental samples were evaluated with a surrogate material (NDPA-$d_{14}$) and ranged 86.2~122.3%. Thus, this method can be used to determine low (ng/L) levels of N-nitrosamines in water samples.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.4
• /
• pp.382-388
• /
• 2023

A liquid-type chlorella (LC) produced by self-cultivation is used for strawberry cultivation by farmers in Korea. This study aimed to investigate seedling growth in two strawberry cultivars 'Soraya' and 'Haruhi' after applying solid-type chlorella (SC) in the greenhouse for 30 d. The treatments were as follows: Control, LC (0.2% of 1.0 × 10⁷ cells/mL), ¼ SC (12.5 g/m²), ½ SC (25 g/m²), and SC (50 g/m²). Compared to the control, in the ½ SC treatment, dry weight of the seedlings increased at 30 days after treatment (DAT). Phosphorus content in the leaves of 'Soraya' seedlings of the SC treatment increased compared to that of the control. At 10 and 30 DAT, photosynthetic pigments including chlorophylls and carotenoids in the seedlings of both cultivars increased with the ½ SC treatment. These results indicate that the application of SC improved the growth of strawberry seedlings and could replace LC.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.644-651
• /
• 2011

Storing hydrogen in solid state hydride is one of the best promising methods for the future hydrogen economy. The total performance of such systems depends on the rate at which the amount of mass and heat migration is supplied to solid hydride. Therefore, an accurate modeling of the heat and mass transfer is of prime importance in optimizing the design of such systems. In this work, Hydrogen storage in Pt-CNTs hydrogen reactor has been intensively investigated by solving 2 dimensional mathematical models. Using a CFD computer software, systematic studies have been performed to elucidate the effect of heat and mass transfer during hydrogen charging periods. It was revealed that the optimized design of hydrogen storage vessel can prevent the increase of system temperature and the charging time due to the convective cooling effects inside the vessels at even high charging pressure. Because none has reported the critical issues of heat and mass transfer for CNT based hydrogen storage system, this work can support the first insight of the optimal design for solid state hydrogen storage system based on CNT in the near future.

• Korean Journal of Food Science and Technology
• /
• v.46 no.4
• /
• pp.425-431
• /
• 2014

In this study, the volatile compounds in 24 commercial Korean black raspberry wines were isolated by headspace solid-phase microextraction and analyzed by gas chromatography-mass spectrometry (GC-MS). A total of 43 volatile components, including 15 esters, 12 terpenes, 7 alcohols, 4 acids, 3 ketones, and 2 aldehydes, were identified. Ethyl esters and alcohols such as ethyl acetate, ethyl octanoate, isoamyl alcohol, and phenethyl alcohol were the most represented groups among the quantified volatiles. In particular, various terpenes such as DL-limonene, linalool, alpha-terpineol, and myrtenol were identified. The differences in volatile components among the 24 black raspberry wines and possible sample grouping were examined by applying principal component analyses to the GC-MS data sets. The first and second principal components explained 43.9% of the total variation across the samples. No apparent sample groupings were observed according to manufacturing locations. The samples KU, BH, SR, and MO showed higher overall levels in the concentrations of terpenes originating from black raspberry, while other samples such as BB and HB, showed higher in ethyl ester and alcohol contents produced by yeast fermentation, respectively.

• Journal of Life Science
• /
• v.13 no.2
• /
• pp.184-190
• /
• 2003

Myxococcus xanthus is a Gram negative, rod-shaped, soil bacterium that displays a social behaviors, and multicellular development upon nutrient deprivation. The csgA gene encoding a cell surface protein is essential for developmental behaviors including rippling, aggregation, fruiting body formation and sporulation. csgA mutants show normal vegetative growth, but lack all these developmental phenotypes. Expression of the CsgA (C-signal) specific genes are eliminated or dramatically reduced in csgA mutants. In order to identify components of C-signal transduction pathway, second site mutations were introduced into csgA mutants and were identified which can fully or partially restore development of csgA mutants (Rhie, H. G. et. al. 1989. J. Bacteriol. 171, 3268-3276). One of such csgA suppressor mutations, socD500 restores only sporulation to csgA mutants at 15$^{\circ}C$. The socD500 mutaion however eliminates the three basic developmental requirements, starvation, high cell density and a solid surface. Only sporulation, not accompanied with fruiting body formation is induced simply by shifting the temperature of vegetatively growing cells from $32^{\circ}C$ to $15^{\circ}C$. Spores induced by socD500 mutation is not as thick as that of wild-type fruiting body. In socD500 genetic background, two of ten C-signal dependent genes, $\Omega$DK4506 and $\Omega$DK4406 are more highly expressed in growing cells at $15^{\circ}C$. These results indicate that the socD500 mutation may be partly involved in the regulation of expression of two C-signal dependent genes and genes for sporulation in this transduction pathway.