• Elastomers and Composites
• /
• v.44 no.2
• /
• pp.106-111
• /
• 2009

Tissue engineering is a research field for artificial substitutes to improve or replace biological functions. Scaffolds play a important role in tissue engineering. Scaffold porosity and pore size provide adequate space, nutrient transportation and cell penetration throughout the scaffold structure. Scaffold structure is directly related to fabrication methods. This review will introduce the current technique of 3D scaffold fabrication for tissue engineering. The conventional technique for scaffold fabrication includes salt leaching, gas foaming, fiber bonding, phase seperation, melt moulding, and freeze drying. These conventional scaffold fabrication has the limitations of cell penetration and interconnectivity. In this paper, we will present the solid freeform fabrication (SFF) such as stereolithography (SLA), selective laser sintering (SLS), and fused deposition modeling (FDM), and 3D printing (3DP).

• Smart Media Journal
• /
• v.13 no.5
• /
• pp.45-51
• /
• 2024

Recently, realistic contents such as virtual reality(VR) and augmented reality (AR) are widely used for education to provide beneficial learning environments with thee-dimensional(3D) information and interactive technology. Specially, AR technology will be helpful to intuitively understand by adding virtual objects registered in the real learning environment with effective ways. In this paper, we developed an AR learning system using 3D spatial information in the 2D based textbook for studying math related to geometry. In order to increase spatial learning effect, we applied to solid shapes such as prisms and pyramids in mathematics education process. Also, it allows participants to use various shapes and expression methods (e.g., wireframe mode) with interaction. We conducted the experiment with our AR system, evaluated achievement and interest. Our experimental study showed positive results, our results are expected to provide effective learning methods in various classes through realistic visualization and interaction methods.

• Korean Journal of Food Science and Technology
• /
• v.15 no.2
• /
• pp.136-140
• /
• 1983

The hydration characteristics of barley kernels with various polishing yields were investigated at temperatures of $20-60^{\circ}C$ and their sorption kinetics were studied. The moisture gain in initial stage of hydration was directly proportional to square root of hydration time and there was a break point at the moisture gain of 0.45-0.55g $H_2O/g$ solid. The hydration rate was great in order of polishing yield of 50, 70, 95, 90 and 100%, and increased with increasing hydration temperature. The diffusivity of water into barley kernels followed Arrhenius equation, and the activation energies in hydration reaction of polished barley were ranged from 6.9 to 9.5 Kcal/mole and that of non-polished one was 11.6Kcal/mole.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1107-1113
• /
• 1998

This work was to study the potential use of germinated and microwave-vacuum-dried brown rite as a raw material for enzyme food. Brown rice was soaked in water at $15^{\circ}C$ for 2 days and then germinated at $25^{\circ}C$ for 4 days. The germin ated brown rice was then dried by different drying methods: microwave vacuum drying 1(drying only), microwave vacuum drying 2 $(drying{\rightarrow}crushing{\rightarrow}drying)$, hot air drying, vacuum drying and freeze drying. Each drier except freeze drier was set to maintain the sample temperature to be $60^{\circ}C$. During microwave vacuum drying 1 and 2 the sample reached $60^{\circ}C$ much faster (5 min) and was dried much faster (2 to 3 hrs for microwave vacuum drying 1 and 2 than the other drying methods. The initial drying rate of microwave vacuum drying was ten times faster than that of hot air drying. The microwave vacuum drying produced a dry sample of the highly retained enzymic activity, followed by freeze drying, vacuum drying and hot air drying.

• Korean Journal of Plant Resources
• /
• v.11 no.1
• /
• pp.15-21
• /
• 1998

This study was carried out to determine the effects of plant growth regulators on cell culture and organogenesis from Sicyos angulatus L. using explants of leaves, stems and cotyledons. Optimal callus induction for S. angulatus was obtained on MS medium with 0.1mg/$\ell$ BA and 2.0mg/$\ell$ 2,4 -D from cotyledons, 0.1mg/$\ell$ BA and 5.0mg/$\ell$ NAA from leaves explants, Optimal media for subculture and growth of S. angulatus callus were 1/2 MS medium with 0.1mg/$\ell$ BA and 1.0mg/$\ell$ 2,4 -D for solid culture, and 0.1mg/$\ell$ 2,4-D for suspension culture. Many adventitious roots with some shoots were formed were formed from leaf and cotyledon explants of S. angulatus during callus induction with optimal combinations of plants growth regulators.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.253-254
• /
• 2002

Based on 3-D surface morphology measurements of C.G. irons, the fractal analyses were made on relationship between dry sliding surface morphology and the fractal dimension. It is revealed that the values of fractal dimensions ($D_f$) of sliding surfaces are in the range between 1-2, which are closely related to the surface morphologies. With the increase in depths of grooves or pits, the $D_f$ values increase. At the same time, the increases in densities of the grooves also cause the $D_f$ values to increase. At last, relationship among $D_f$ and friction coefficient as well as wear rate is discussed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.1
• /
• pp.15-18
• /
• 2009

To enhance near UV-visible absorption region and to applied phosphor convert-white LEOs (PC-WLEDs), a red phosphor composed of ${Y_2}{SiO_5}:\;EU^{3+}$, $Bi^{3+}$ compounds was prepared by the conventional solid-state reaction. The photoluminescence (PL) shown that samples were excited by near UV light 395 nm for measurement of PL spectra. Emission spectra of samples have shown red emissions at 612 nm ($^5D_0{\to}^7F_2$). The enhanced near $UV{\sim}$ visible excitation spectrum with a broad band centered at 258 nm and 282 nm originated in the transitions toward the charge transfer state (CTS) due to the $Eu^{3+}-Bi^{3+}-O^{2-}$ interaction. The other excitation band at $350\;nm{\sim}480\;nm$, corresponding to the transitions $^7F_0{\to}^5L_9$ (364 nm), $^7F_0{\to}^5G_3$ (381 nm), $^7F_0{\to}^5L_6$ (395 nm), $^7F_0{\to}^5D_3$, (415 nm) and $^7F_0{\to}^5D_2$ (466 nm), occurred due to enhanced the f-f transition increasing $Bi^{3+}$ and $Eu^{3+}$ ions. The PL intensity increased with increased as concentration of $Bi^{3+}$ and the emission intensity becomes with a maximum at 0.125 mol.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.2
• /
• pp.35-42
• /
• 2022

In this paper, a method to increase the combining efficiency and isolation of the combiner, the core module of SSPA (solid state amplifier), was studied. Specifically, the isolation was secured by matching the common port and the isolation port in the waveguide combiner. The matching structure for matching is in the form of a circular disk and is engraved inside the waveguide combiner. The structure is very simple, so it is possible to secure stable performance. And this structure showed more than 60 times higher critical power performance compared to previous studies, confirming that it is suitable for high output. And by combining 1-stage T-junction and 2, 3 stage MagicT combiner, miniaturization was achieved and the combining efficiency was optimized by reducing the insertion loss. The fabricated waveguide coupler obtained an isolation of 16dB or more and a coupling efficiency of 86.2%.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.382-387
• /
• 2004

As the increasing needs in the industrial filed, many studies for the 3D CAD system are carried out. There are two types of 3D CAD system. One is manifold modeler, the other is non-manifold modeler. In the manifold modeler only 3D objects can be modeled. In the non-manifold modeler 3D, 2D, 1D, and 0D objects can be modeled in a unified data structure. Recently there are many studies on the non-manifold modeler. Most of them are focused on finding unknown topological entities and representing all kinds of topological entities found. In this paper, efficient data structure is selected. The boundary information on a face and an edge is included in this data structure. The boundary information on a vertex is excluded considering the frequency of usage. Because the disk cycle information is not required in most case of modeling. It is compact. It stores essential non-manifold information such as loop cycle and radial cycle. A suitable Euler-Poincare equation is studied and selected. Using the efficient data structure and the selected Euler-Poincare equation, 18 basic Euler operators are implemented. Several 3D models are created using the implemented modeler. A non-manifold modeling can be carried out using the implemented 3D CAD system. The results of this paper could be used in the further studies such as an implementation of Boolean operators, and a translation of 2D CAD drawings to 3D models.

• Journal of Korean Society of Steel Construction
• /
• v.30 no.2
• /
• pp.97-104
• /
• 2018

The safety evaluation of horizontal and vertical bolted connection between PHC piles is presented. The numerical analysis model is constructed using the commercial finite element program, ABAQUS, in which 3D solid element is used to model all the connection devices. The actual bolted connection is idealized by the contact and tie condition given in ABAQUS. Through the finite element analysis, the compression, tensile, bending and shear behaviors of PHC pile connection were analyzed. The safety factor based on Von-Mises and yield stress was calculated for the safety evaluation of each connection devices.