• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.925-930
• /
• 2003

The dielectric polarizability-related factors contributing to the $\tau$$_{\varepsilon}$ have been analysed in terms of dielectric permittivity $\varepsilon$, Tolerance Factor (TF), and octahedron tilt angles in (1-x)CaTi $O_3$-x[A(B', B″) $O_3$] (A=Ca, La, Li, B'=Al, Fe, Mg, B″=Nb, Ta) and (S $r_{0.2}$C $a_{0.8}$)( $Ti_{1-x}$ Z $r_{x}$) $O_3$. All the compounds have the orthorhombic Pbnm structure except the end members A(B', B″) $O_3$ and the solid solutions of x$\geq$0.8. The additional dipole field effect is suggested as a dominant factor contributing to $\tau$$_{\varepsilon}$ in CaTi $O_3$-based ceramics having relatively large $\varepsilon$, which has not been generally considered in the previous reports dealing with the $\tau$$_{\varepsilon}$. This study has been focussed on delineating the dipole field effect on the $\tau$$_{\varepsilon}$ in comparison to the octahedron tilt effect in CaTi $O_3$-based ceramics.cs..cs.

• Structural Engineering and Mechanics
• /
• v.35 no.6
• /
• pp.677-697
• /
• 2010

This paper focuses on geometrically non-linear static analysis of a simply supported beam made of hyperelastic material subjected to a non-follower transversal uniformly distributed load. As it is known, the line of action of follower forces is affected by the deformation of the elastic system on which they act and therefore such forces are non-conservative. The material of the beam is assumed as isotropic and hyperelastic. Two types of simply supported beams are considered which have the following boundary conditions: 1) There is a pin at left end and a roller at right end of the beam (pinned-rolled beam). 2) Both ends of the beam are supported by pins (pinned-pinned beam). In this study, finite element model of the beam is constructed by using total Lagrangian finite element model of two dimensional continuum for a twelve-node quadratic element. The considered highly non-linear problem is solved by using incremental displacement-based finite element method in conjunction with Newton-Raphson iteration method. In order to use the solution procedures of Newton-Raphson type, there is need to linearized equilibrium equations, which can be achieved through the linearization of the principle of virtual work in its continuum form. In the study, the effect of the large deflections and rotations on the displacements and the normal stress and the shear stress distributions through the thickness of the beam is investigated in detail. It is known that in the failure analysis, the most important quantities are the principal normal stresses and the maximum shear stress. Therefore these stresses are investigated in detail. The convergence studies are performed for various numbers of finite elements. The effects of the geometric non-linearity and pinned-pinned and pinned-rolled support conditions on the displacements and on the stresses are investigated. By using a twelve-node quadratic element, the free boundary conditions are satisfied and very good stress diagrams are obtained. Also, some of the results of the total Lagrangian finite element model of two dimensional continuum for a twelve-node quadratic element are compared with the results of SAP2000 packet program. Numerical results show that geometrical nonlinearity plays very important role in the static responses of the beam.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.11
• /
• pp.1750-1759
• /
• 2020

The characterization of cytochrome P450 CYP125A13 from Streptomyces peucetius was conducted using cholesterol as the sole substrate. The in vitro enzymatic assay utilizing putidaredoxin and putidaredoxin reductase from Pseudomonas putida revealed that CYP125A13 bound cholesterol and hydroxylated it. The calculated K_D value, catalytic conversion rates, and Km value were 56.92 ± 11.28 μM, 1.95 nmol min^-1 nmol^-1, and 11.3 ± 2.8 μM, respectively. Gas chromatography-mass spectrometry (GC-MS) analysis showed that carbon 27 of the cholesterol side-chain was hydroxylated, characterizing CYP125A13 as steroid C27-hydroxylase. The homology modeling and docking results also revealed the binding of cholesterol to the active site, facilitated by the hydrophobic amino acids and position of the C27-methyl group near heme. This orientation was favorable for the hydroxylation of the C27-methyl group, supporting the in vitro analysis. This was the first reported case of the hydroxylation of cholesterol at the C-27 position by Streptomyces P450. This study also established the catalytic function of CYP125A13 and provides a solid basis for further studies related to the catabolic potential of Streptomyces species.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.9
• /
• pp.766-771
• /
• 2009

Lead-free $0.94(Na_{0.5}K_{0.5})NbO_3$-0.06Ba$(Ti_{0.9}Sn_{0.1})O_3$ [0.94NKN-0.06BTS] ceramics doped with 1 mol% $MnO_2$ were synthesized by a conventional solid state method. The phase transitional behavior and piezoelectric properties of the ceramics sintered at various temperatures were investigated. The 0.94NKN-0.06BTS ceramics sintered at $1050^{\circ}C$, having morphotropic phase boundary of orthorhombic and tetragonal phases, exhibited a microstructure with abnormal grain growth. A diffused phase transition behavior for all the specimens was verified as high degree of diffuseness (${\gamma}$) values from 1.45 to 1.79. A high piezoelectric constant of $d_{33}=256$ pC/N and a satisfactory electromechanical coupling factor of $k_p=42%$ were obtained for the relatively dense 0.94NKN-0.06BTS ceramics sintered at $1050^{\circ}C$.

• Korean Institute of Interior Design Journal
• /
• v.14 no.3 s.50
• /
• pp.114-121
• /
• 2005

Louis 1. Kahn was a wise architect who learned from history. He developed his own unique architecture by combining his creative sense with design principles and vocabularies that can be found in historical architecture. When restricting a space, he surrounded the space with thick walls as it had been done in historical buildings. The interior space encompassed by this method became a center-oriented and stable space. The objective of this study is to find the characteristics of Kahn's interior spaces by analyzing his projects in terms of space, form, daylight and materials. For this purpose, five works that are considered to have significance from the aspect of interior design were selected and analyzed. The characteristics realized through this study are as follows. A) Spatial features: 1) Generally speaking, each required space has been arranged symmetrically. 2) Being clearly defined as the main space, the subsidiary space, or the service space, each space also was placed very functionally. 3) The space encompassed by thick walls became a center-oriented, stable space. And in most case, it was characterized as a dark space. B) Formative features: 4) The space was defined as a basic solid such as a cylinder, a hexahedron, and an octagonal box, and was developed into a complex shape by the recessed windows. 5) Historical vocabularies such as an arch, a vault, and a dome were reinterpreted in new ways by kahn's own eyes. 6) Haying diverse shapes, the skylights enrich the space in terms of form. C) Daylight feature: 7) The vertical light entering through the skylights creates a solemn and mysterious atmosphere. 8) Given the shadows from the windows that change according to time, the interior space becomes a very vivid space. D) Material feature: 9) Harmonized with cold and smooth materials such as exposed concrete, metal, and glass, the interior space provides a modern atmosphere. 10) Warm appearing wood was used for furniture and part of walls or floors. The effective use of wood takes on a role that is quite complementary to the cold ambience of the smooth and cold materials. 11) With flexibility In building shapes, the concrete becomes the form-endowing materials.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.1
• /
• pp.27-34
• /
• 2009

Angiogenesis is essential for solid tumor growth and progression. Among the pro-angiogenetic factors, vascular endothelial growth factor(VEGF), also known as vascular permeability factor, is the most important as a mitogen for vascular endothelium. The VEGF family of molecules currently consists of six growth factors, VEGF-A, VEGF-B, VEGF-C, VEGF-D, VEGF-E, and placenta growth factor(PlGF). Over-expression of PlGF is associated with angiogenesis under pathological conditions such as ischemia, inflammation, and cancer. Hence, the goal of this study is to identify the correlation of clinicopathlogical factors and the up-regulation of PlGF expression in oral squamous cell carcinoma. We studied the immunohistochemical staining of PlGF, PlGF gene expression and a real time quantitative RT-PCR in 20 specimens of 20 patients with oral squamous cell carcinoma. The results were as follows. 1. In the immunohistochemical study of poorly differentiated and invasive oral squamous cell carcinoma, the high level staining of PlGF was observed. And the correlation between immunohistopathological PlGF expression and histological differentiation of specimens was significant (Pearson correlation analysis, significance [r] >0.6, P < .05). 2. In the PlGF gene RT-PCR analysis, PlGF expression was more in tumor tissue than in adjacent normal tissue. Paired-samples analysis determined the difference of PlGF mRNA expression level between the cancer tissue and the normal tissue (Student's t - test, P < .05) These findings suggest that up-regulation of the PlGF gene may play a role in progression and local metastasis in invasive oral squamous cell carcinoma.

• Corrosion Science and Technology
• /
• v.19 no.3
• /
• pp.131-137
• /
• 2020

A number of piping components in the secondary system of nuclear power plants (NPPs) are exposed to aging mechanisms, such as flow-accelerated corrosion (FAC), cavitation, flashing, solid particle erosion, and liquid droplet impingement erosion. Those mechanisms may lead to thinning, leaking, or rupture of the components. Due to the pipe ruptures caused by wall thinning in Surry unit 2 in the USA in 1986 and Mihama unit 3 in Japan in 1994, pipe wall thinning management has emerged as one of the most important issues in the nuclear industry. To manage pipe wall thinning, a foreign program has been utilized for NPPs in Korea since 1996. As our experience and knowledge of pipe wall thinning management have accumulated, our program needs to reflect our experience, requests from users, and the result of recent experiments using Flow Accelerated Corrosion Testing System (FACTS). FACTS is the empirical experimental facility developed by Korea Atomic Energy Research Institute (KAERI) for tests. Accordingly, KEPCO-E&C developed a 3D-based pipe wall thinning management program called ToSPACE in 2016. This paper describes a comparison between the FAC analysis results using ToSPACE and the experimental results using FACTS to verify their applicability to pipe wall thinning management in NPPs.

• Environmental Engineering Research
• /
• v.23 no.3
• /
• pp.288-293
• /
• 2018

The main objective of this study is to investigate the influence of hydraulic retention time (HRT) on biogas production during leachate treatment using an anaerobic reactor type Upflow Anaerobic Sludge Blanket. For this purpose, four HRTs ranging from 12 to 48 h were experienced. The obtained results showed that higher amount of biogas could be produced during longer HRTs. However, HRTs longer than 48 h could not affect clearly the biogas generation and considered as unnecessary given the small additional amount of biogas produced during the degradation process. A volume of $0.434L/L_{leachate}/d$ was achieved during the treatment with a HRT of 48 h. The higher biogas production, the smaller chemical oxygen demand (COD) values achieved. Besides, COD removal and biogas production positively correlate, showing that the active biomass has degraded effectively the organic load to produce biogas. Moreover, all the analyzed physicochemical parameters have experienced a decrease after 48 h except for the pH, which increased to approximately neutral value. More precisely, a decrease of 93.8%, 89.7%, 95%, 70%, 77%, and 84.4% was recorded for COD, electrical conductivity, total suspended solid, turbidity, $NH_4{^+}-N$, and $NO_3{^-}-N$, respectively.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2006.05a
• /
• pp.78-85
• /
• 2006

In textile industries, waste effluent containing zinc is generated during the manufacture of rayon yarn from the wood pulp or cotton linters. Due to the strict environmental regulations and the presence of toxic metallic and other constituents, the discharge of industrial effluents in the sewage or disposal of solid sludge as landfill is restricted. Before recycling of zinc as zinc sulphate solution to the spinning-bath of the rayon manufacturing plant the zinc sulphate solution must be free from calcium, which is deleterious to the process as gypsum precipitates with the increase in concentration and forms scale in the bath. In the present work an attempt has been made to develop a process following solvent extraction technique using thiophosphinic extractants, Cyanex 272 and 302 modified with isodecanol and diluted in kerosene to recover zinc from rayon effluent. Various process parameters viz. extraction of zinc from different concentration of solution, distribution ratio, selective extraction, O/A ratio on extraction and stripping from the loaded organic, complex formation in the organic phase etc. have been studied to see the feasibility of the process. The extractant Cyanex 302 has been found selective for the recovery of 99.99% of zinc from the effluent above equilibrium pH 3.4 maintaining the O/A ratio of 1/30 leaving all the calcium in the raffinate. It selectively extracted zinc in the form of complex $[R_{2}Zn.3RH]_{org}$ and retained all the calcium in the aqueous raffinate. The zinc from the loaded Cyanex 302 can be stripped with 10% sulphuric acid at even O/A ratio of 10 without affecting the stripping efficiency. The stripped solution thus obtained could be recycled in the spinning bath of the rayon plant. The raffinate obtained after the recovery of zinc could be disposed safely without affacting environment.

• Macromolecular Research
• /
• v.16 no.3
• /
• pp.204-211
• /
• 2008

A platinum-catalyzed polyelectrolyte porous membrane was prepared by solid-state compression of electrospun polystyrene (PS) fibers and in-situ metallization of counter-balanced ionic metal sources on the polymer surface. Using this ion-exchange metal-polymer composite system, fiber entangled pores were formed in the interstitial space of the fibers, which were surrounded by sulfonic acid sites ($SO_3^-$) to give a cation-selective polyelectrolyte porous bed with an ion exchange capacity ($I_{EC}$) of 3.0 meq/g and an ionic conductivity of 0.09 S/cm. The Pt loading was estimated to be 16.32 wt% from the $SO_3^-$ ions on the surface of the sulfonated PS fibers, which interact with the cationic platinum complex, $Pt(NH_3)_4^{2+}$, at a ratio of 3:1 based on steric hindrance and the arrangement of interacting ions. This is in good agreement with the Pt loading of 15.82 wt% measured by inductively coupled plasma-optical emission spectroscopy (ICP-OES). The Pt-loaded sulfonated PS media showed an ionic conductivity of 0.32 S/cm. The in-situ metallized platinum provided a nano-sized and strongly-bound catalyst in robust porous media, which highlights its potential use in various electrochemical and catalytic systems.