• The KSFM Journal of Fluid Machinery
• /
• v.10 no.2 s.41
• /
• pp.32-40
• /
• 2007

The present study investigated local pressure drop in a rotating smooth square duct with turning region. The duct has a hydraulic diameter $(D_h)$ of 26.7mm and a divider wall of 6.0mm or $0.225D_h$. The distance between the tip of the divider and the outer wall of the duct is $1.0D_h$. The Reynolds number (Re) based on the hydraulic diameter is kept constant at 10,000, and the rotation number (Ro) is varied from 0.0 to 0.20. The pressure coefficient distribution $(C_p)$, the friction factor (f) and the thermal performance $({\eta})$ are presented on the leading, the trailing and the outer surfaces. It is found that the curvature of the $180^{\circ}-turn$ produces Dean vortices that cause the high pressure drop in the turning region. The duct rotation results in the pressure coefficient discrepancy between the leading and trailing surfaces. That is, the high pressure values appear on the trailing surface in the first-pass and on the leading and side surfaces in the second-pass. As the rotation number increases, the pressure discrepancy enlarges. In the fuming region, a pair of the Dean vortices in the stationary case transform into one large asymmetric vortex cell, and then the pressure drop characteristics also change.

• Biomedical Science Letters
• /
• v.24 no.4
• /
• pp.430-434
• /
• 2018

Candida glabrata is the second most prevalent causative agent for candidiasis following C. albicans. The opportunistic yeast, C. glabrata, is able to cause the critical bloodstream infections in hospitalized patients. Conventional identification methods for yeasts are often time consuming and labor intensive. Therefore, recent studies on sequence-based identification have been conducted. Recently, sequencing the D1/D2 domain of the large subunit ribosomal RNA gene and the internal transcribed spacers (ITS) 1 and ITS2 regions of the ribosomal DNA has proven useful for DNA-based identification of most species of fungi. In the present study, therefore, fungal ITS and D1/D2 domain regions were targeted and analyzed by DNA sequencing for the accurate identification of C. glabrata clinical isolates. A total of 102 C. glabrata clinical isolates from various clinical samples including bloodstream, catheterized urine, bile and other body fluids were used in the study. The results of the DNA sequence analysis showed that the mean standard deviation of species identity percent score between ITS and D1/D2 domain regions was $97.8%{\pm}2.9$ and $99.7%{\pm}0.46$, respectively. These results revealed that the D1/D2 domain region might be a better target for identifying C. glabrata clinical isolates based on DNA sequences than the ITS1 and ITS2 regions. However, in order to evaluate the usefulness of D1/D2 domain region for species identification of all Candida species, other Candida species such as C. albicans, C. tropicalis, C. dubliniensis, and C. krusei should be verified in further studies additionally.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.719-724
• /
• 1994

This paper describes a hybrid surface-based method for smooth 3D surface approximation to a sequence of 2D cross sections. The resulting surface is a hybrid G $^{1}$ surface represented by a mesh of triangular and rectangular Bezier patches defined on skinning, branching, or capping regions. Each skinning region is approximated with a closed B_spline surface, which is transformed into a mesh of Bezier patches. Triangular G $^{1}$ surfaces are constructed over brabching and capping regions such that the transitions between each capping regions such that the transitions between each triangular surface and its neighboring skinning surfaces are G $^{1}$ continuous. Since each skinning region is represented by an approximated rectangular C $^{2}$ suface instead of an interpolated trctangular G $^{[-1000]}$ surface, the proposed method can provide more smooth surfaces and realize more efficient data reduction than triangular surfacebased method.

• Electrical & Electronic Materials
• /
• v.10 no.2
• /
• pp.156-165
• /
• 1997

D-E hysteresis loops have been measured for the 65/35 mole % copolymer of vinylidene fluoride and trifluoroethylene over wide temperature range. The remanent polarization and the coercive field at room temperature were estimated to be 75 mC/m$^{2}$ and 55 MV/m respectively. D-E hysteresis loops were observed even below the glass transition temperature(-20.deg. C) and the remanent polarization and the coercive field were larger, as the temperature lower. It seems that the remanent polarization and the coercive field depend on the amorphous region as well as crystalline region in this copolymer. And the ferroelectric-to-paraelectric phase transition was observed at 90.deg. C on heating and 80'C on cooling. Double hysteresis loops were observed at the temperature(85.deg. C) of paraelectric phase.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.209-212
• /
• 1997

Spectral gain variation characteristics of the silica-based erbium doped fiber amplifiers is investigated in the 1545-1557 nm wavelength region. For a given length of the erbium doped fiber, the gain($G_0$) with minimum spectral gain variation is uniquely determined. The spectral gain imbalance DG is nearly proportional to the difference between G0 and the operating gain(G) with the proportional constant of 0.1-0.2 dB/dB. For the gain flattened EDFA at the input power of -20 dBm/ch. and the gain of 21 dB, the output power and the optical signal to noise variations after 12 cascaded EDFAs were 5 dB and 3 dB, respectively.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.673-681
• /
• 2014

In this paper, a novel low specific on-resistance SOI LDMOS Device with P+P-top layer in the drift region is proposed and investigated using a two dimensional device simulator, MEDICI. The structure is characterized by a heavily-doped $P^+$ region which is connected to the P-top layer in the drift region. The $P^+$ region can modulates the surface electric field profile, increases the drift doping concentration and reduces the sensitivity of the breakdown voltage on the geometry parameters. Compared to the conventional D-RESURF device, a 25.8% decrease in specific on-resistance and a 48.2% increase in figure of merit can be obtained in the novel device. Furthermore, the novel $P^+P$-top device also present cost efficiency due to the fact that the $P^+$ region can be fabricated together with the P-type body contact region without any additional mask.

• Journal of Environmental Science International
• /
• v.15 no.5
• /
• pp.387-396
• /
• 2006

The numerical modeling and comparison with observations are performed to find out the detailed structure of meteorology and the characteristic of related dispersion phenomena of the non-reactive air pollutant at Kyoungin region, South Korea, where several industrial complex including Siwha, Banwol and Namdong is located. MM5 (Fifth Generation NCAR/Penn State Mesoscale Model), 3-D Land/sea breeze model and 3-D diagnostic meteorological model have been utilized for the meteorological simulation for September, 2002 with each different spatial resolution, while 3-D Eulerian air dispersion model for the air quality study. We can see the simulated wind field shows the very local circulation quitely well compared with in-site observations in shoreline area with complex terrains, at which the circulation of Land/sea breeze has developed and merged with the mountain and valley breeze eventually. Also it is shown in the result of the dispersion model that the diurnal variation and absolute value of daily mean $SO_2$ concentrations have good agreement with observations, even though the instant concentration of $SO_2$ simulated overestimates around 1.5 times rather than that of observation due to neglecting the deposition process and roughly estimated emission rate. This results may indicate that it is important for the air quality study at shoreline region with the complex terrain to implement the high resolution meteorological model which is able to handle with the complicate local circulation.

• Korean Journal of Community Nutrition
• /
• v.25 no.1
• /
• pp.32-47
• /
• 2020

Objectives: Calcium (Ca) is an insufficiently consumed nutrient, whereas phosphorus (P) intake has exceeded the recommended intake level in Korea over the past decade. The purpose of this study was to analyze dietary Ca and P intakes and their contribution rate according to dish groups. Methods: A 24-hour dietary recall survey of 640 healthy adults (aged 19-69 years) was undertaken twice in four Korean provinces. Dietary Ca and P intakes and their rates of contribution from 31 major dish groups were analyzed and compared by gender, age group, and region. Results: The average Ca and P intakes of the subjects were 542.1 ± 222.2 mg/d and 1,068.3 ± 329.0 mg/d, respectively. The intakes of Ca and P as percentages of recommended nutrients intake (RNI%) were 71.7 ± 29.8% and 152.6 ± 47%, respectively, and the percentages under the estimated average requirement were 60.3% for Ca and 3.8% for P. The RNI% of Ca was not significantly different between males and females, but was significantly higher in subjects in the sixties age group than in other age groups and was significantly lower in the Korean capital than in other regions. The RNI% of P did not significantly differ by gender or age groups, but it was significantly higher in the capital than in Gyeong-sang. The five major dish groups contributing to Ca intake (contribution rate) were milks/dairy products 69.2 ± 109.2 mg/d (12.6%), soups 55.6 ± 69.6 mg/d (10.1%), stir-fried foods 53.1 ± 70.7 mg/d (9.7%), stews 43.4 ± 85.4 mg/d (7.9%), and kimchi 38.4 ± 31.8 mg/d (7.0%). The five major dish group contributing to P intake (contribution rate) were cooked rice 160.7 ± 107.1 mg/d (14.9%), stir-fried foods 88.5 ± 89.4 mg/d (8.2%), soups 76.7 ± 85.8 mg/d (7.1%), one-dish meals 63.3 ± 94.4 mg/d (5.9%), and stews 62.6 ± 89.3 mg/d (5.8%). The dish groups contributing to Ca and P intakes differed somewhat by gender, age group, and region. Conclusions: Programs to improve the nutritional status of Ca and P intakes should consider the differences in Ca and P contribution rates by dish groups as well as by gender, age group, and region.

• Publications of The Korean Astronomical Society
• /
• v.32 no.1
• /
• pp.117-121
• /
• 2017

We show Akari data, Herschel data and data from the SCUBA2 camera on JCMT, of molecular clouds. We focus on pre-stellar cores within the clouds. We present Akari data of the L1147-1157 ring in Cepheus and show how the data indicate that the cores are being externally heated. We present SCUBA2 and Herschel data of the Ophiuchus region and show how the environment is also affecting core evolution in this region. We discuss the effects of the magnetic field in the Lupus I region, and how this lends support to a model for the formation and evolution of cores in filamentary molecular clouds.

• Journal of Veterinary Science
• /
• v.21 no.6
• /
• pp.85.1-85.6
• /
• 2020

A cold-adapted porcine reproductive and respiratory syndrome virus (CA-VR2332) was generated from the modified live virus strain VR2332. CA-VR2332 showed impaired growth when cultured at 37℃ with numerous mutations (^S731^F, ^E819^D, ^G975^E, and ^D1014^N) in the hypervariable region of the NSP2, in which the mutation ^S731^F might play a vital role in viral replication at 30℃. Conserved amino acid sequences of the GP5 protein suggests that CA-VR2332 is a promising candidate for producing an effective vaccine against PRRSV infection. Further studies on replication and immunogenicity in vivo are required to evaluate the properties of CA-VR2332.