• Korean Journal of Applied Biomechanics
• /
• v.16 no.3
• /
• pp.43-51
• /
• 2006

The purpose of this study was to analyze kinematic variables during turing back kick motion of Taekwondo. The subjects of this study were the 4 skilled and 4 unskilled of male university player in respectively. The experiment of this study was used two 16mm high speed cameras and its speed 125 frames/s. Analysis of this data was three dimensional cinematography using KWON3D program package. The results were as following; 1. In the elapsed time, there was no significance difference statically between a skilled and unskilled group. But skilled group was more fast during the motion of I phase. And unskilled group was more fast during the motion of II phase so called force production section, which had an influence on Diechagi's velocity. 2. In the center of gravity of human body, the changing of it was $1.10{\pm}0.04m$, $1.12{\pm}0.03m$ of LFM(left foot movement) and $1.36{\pm}0.08m$, $1.39{\pm}0.09m$ of RKF(right knee flection), and $1.44{\pm}0.08m$, $1.42{\pm}0.09m$ of RFI(right foot impact). There was no significance difference statically between the two groups. 3. The velocity of heel on impact was 1.13m/s in the skilled group and 1.23m/s in the unskilled group, when each angle of knee was $110.4{\pm}10.9deg/s$, $114.8{\pm}28.4deg/s$. The maximum velocity of each performance was reached before the RKF, and the velocity and angle at impact along by two groups did not show any significant difference statically. 4. In the angular velocity of just RKF of lower leg, there was significance difference statically between the two groups(p<.05).

• Journal of Fisheries and Marine Sciences Education
• /
• v.15 no.2
• /
• pp.206-218
• /
• 2003

In spite of the importance of a fishing industry, neither any terminology defined in details nor academic systems to educate the workers in the fishery were established in the fisheries social education. The fisheries social education was considered to be the practical area around the actual fields. Therefore, on-site education was very important. Accordingly, this study collected and analyzed theoretical basis of a social education and data on the rural adult education and examined the actual status of the fishing industry in Korea and fisheries extension services enterprise and fisheries developmental enterprise corresponding to the actual fisheries social education conducted in Korea. On the basis of these frames, this study summarized the direction for the progress of fisheries social education that has not been studied until now for the purpose of suggesting the future directions of the fisheries social education as follows; The recognition on the importance of fisheries social education and fundamental researches in the fisheries social education should be extended. The practical development of fisheries social education should be realized. Fisheries extension services enterprise should be evolved by fishermen. The abilities of instructors in the fisheries social education should be improved. The academic factors in the fisheries social education should be emphasized. Inter-disciplinary and multi-disciplinary approaches should be adopted. Various programs should be developed for the progress of the fisheries social education. The exclusive department in charge of the fisheries social education should be established. The information system for the fisheries social education should be secured. The industry, academic organizations and the organs should make cooperation. The fisheries social education should be provided by general social education institutions for the progress. The fisheries development should be deployed on the basis of environmental preservation. It is necessary to deploy the new fishing village movement like the Saemaul movement to the fisheries. The administrative and financial supports for the fisheries social education should be expanded. It is essential to cultivate the future fishermen for the international competitiveness.

• Korean Journal of Veterinary Research
• /
• v.39 no.4
• /
• pp.751-759
• /
• 1999

Plaque characteristics of porcine reproductive and respiratory syndrome (PRRS) virus isolates were examined using MARC-145 line cells. The plaque morphology of PRRS virus isolates was variable in size and heterogenic in population. Upon serial passages of the PRRS virus isolates on MARC-145 tells, heterogeneity was maintained but numbers of the large plaque size virus were increased with certain isolates. A PRRS virus isolate with variable plaque sizes was subcloned into 2 populations : small plaque ($H_S$) and large plaque ($H_L$) viruses. Growth kinetics of the subclones were then determined in MARC-145 cells, and production of the structural polypeptides was analyzed by SDS-PAGE. In a comparison of the growth kinetics, the $H_S$ virus showed higher infectivity titers during the first 48 hours but slower to reach the peak titier than $H_L$ virus did. In a nucleotide sequence comparison, differences of 4 nucleotides in open reading frames 5-6 gene were found between $H_S$ and $H_L$ viruses. Both the $H_S$ and $H_L$ clones produced 5 polypeptide bands with molecular weights of 15, 19, 26, 36 and 42 kD. The 5 bands were detected at 48 hours postinoculation (PI) with antisera to $H_L$ and another large plaque virus ($W_L$) and at 72 hours PI with $H_S$ virus antiserum. The present results demonstrate differences of biologic and molecular characteristics between the two PRRS virus plaque clones.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.4
• /
• pp.319-327
• /
• 2010

A nuclear plant ESF ACS simulator was designed, built, and verified to perform experiment related to ESF ACS of nuclear power plants. The dimension of 3D CAD model was based on drawings of the main control room(MCR) of Yonggwang units 5 and 6. The CFD analysis was performed based on the measurement of the actual flow rate of ESF ACS. The air flowing in ACS was assumed to have $30^{\circ}C$ and uniform flow. The flow rate across the HEPA filter was estimated to be 1.83 m/s based on the MCR ACS flow rate of 12,986 CFM and HEPA filter area of 9 filters having effective area of $610{\times}610mm^2$ each. When MCR ACS was modeled, air flow blocking filter frames were considered for better simulation of the real ACS. In CFD analysis, the air flow rate in the lower part of the active carbon adsorber was simulated separately at higher than 7 m/s to reflect the measured value of 8 m/s. Through the CFD analyses of the ACSes of fuel building emergency ventilation system, emergency core cooling system equipment room ventilation cleanup system, it was confirmed that all three EFS ACSes can be simulated by controlling the flow rate of the simulator. After the CFD analysis, the simulator was built in nuclear grade and its reliability was verified through air flow distribution tests before it was used in main tests. The verification result showed that distribution of the internal flow was uniform except near the filter frames when medium filter was installed. The simulator was used in the tests to confirm the revised contents in Reg. Guide 1.52 (Rev. 3).

• Journal of Broadcast Engineering
• /
• v.14 no.2
• /
• pp.144-153
• /
• 2009

Recently, as the necessity of a light-weighted video encoding technique has been rising for applications such as UCC(User Created Contents) or Multiview Video, Distributed Video Coding(DVC) where a decoder, not an encoder, performs the motion estimation/compensation taking most of computational complexity has been vigorously investigated. Wyner-Ziv coding reconstructs an image by eliminating the noise on side information which is decoder-side prediction of original image using channel code. Generally the side information of Wyner-Ziv coding is generated by using frame interpolation between key frames. The channel code such as Turbo code or LDPC code which shows a performance close to the Shannon's limit is employed. The noise model of Wyner-Ziv coding for channel decoding is called Virtual Channel Noise and is generally modeled by Laplacian or Gaussian distribution. In this paper, we propose a Wyner-Ziv coding method based on the frequency-adaptive channel noise modeling in transform domain. The experimental results with various sequences prove that the proposed method makes the channel noise model more accurate compared to the conventional scheme, resulting in improvement of the rate-distortion performance by up to 0.52dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2C
• /
• pp.156-165
• /
• 2006

In this paper, a new intelligent moving target tracking and surveillance system basing on the pan/tilt-embedded stereo camera system is suggested and implemented. In the proposed system, once the face area of a target is detected from the input stereo image by using a YCbCr color model and phase-type correlation scheme and then, using this data as well as the geometric information of the tracking system, the distance and 3D information of the target are effectively extracted in real-time. Basing on these extracted data the pan/tilted-imbedded stereo camera system is adaptively controlled and as a result, the proposed system can track the target adaptively under the various circumstance of the target. From some experiments using 480 frames of the test input stereo image, it is analyzed that a standard variation between the measured and computed the estimated target's height and an error ratio between the measured and computed 3D coordinate values of the target is also kept to be very low value of 1.03 and 1.18$\%$ on average, respectively. From these good experimental results a possibility of implementing a new real-time intelligent stereo target tracking and surveillance system using the proposed scheme is finally suggested.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.2
• /
• pp.302-311
• /
• 2004

Comamonas testosteroni (formerly Pseudomonas sp.) NCIMB 10643 can grow on biphenyl and alkylbenzenes $(C_2-C_7)$ via 3-substituted catechols. Thus, to identify the genes encoding the degradation, transposon-mutagenesis was carried out using pAG408, a promoter-probe mini-transposon with a green fluorescent protein (GFP), as a reporter. A mutant, NT-1, which was unable to grow on alkylbenzenes and biphenyl, accumulated catechols and exhibited an enhanced expression of GFP upon exposure to these substrates, indicating that the gfp had been inserted in a gene encoding a broad substrate range catechol 2,3-dioxygenase. The genes (2,826 bp) flanking the gfp cloned from an SphI-digested fragment contained three complete open reading frames that were designated bphCDorfl. The deduced amino acid sequences of bphCDorfl were identical to 2,3-dihydroxybiphenyl 1,2-dioxygenase (BphC), 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoate hydrolase (BphD), and OrfI, respectively, that are all involved in the degradation of biphenyl/4-chlorobiphenyl (bph) by Ralstonia oxalatica A5. The deduced amino acid sequence of the orfl revealed a similarity to those of outer membrane proteins belonging to the OmpW family. The introduction of the bphCDorfl genes enabled the NT-l mutant to grow on aromatic hydrocarbons. In addition, PCR analysis indicated that the DNA sequence and gene organization of the bph operon were closely related to those in the bph operon from Tn4371 identified in strain A5. Furthermore, strain A5 was also able to grow on a similar set of alkylbenzenes as strain NCIMB 10643, demonstrating that, among the identified aromatic hydrocarbon degradation pathways, the bph degradation pathway related to Tn4371 was the most versatile in catabolizing a variety of aromatic hydrocarbons of mono- and bicyclic benzenes.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.4
• /
• pp.343-351
• /
• 2016

Objective: The purpose of this study was to help improve game performance and provide preliminary data to enhance the efficiency of the kick and stability of the support foot by comparing the kinematic characteristics of the repeated side kick (geodeupyeopchagi) in poomsaeKoryo between expert and non-expert groups. Method: The subjects were divided into 2 groups according to proficiency in Taekwondo, an expert group and a non-expert group (n = 7 in each group), to observe the repeated side-kick technique. Four video cameras were set at a speed of 60 frames/sec and exposure time of 1/500 sec to measure the kinematic factors of the 2 groups. The Kwon3D XPprogramas used to collect and analyze three-dimensional spatial coordinates. Ground reaction force data were obtained through a force plate with a 1.200-Hz frequency. An independent samplesttest was performed, and statistical significance was defined as .05. The SPSS 18.0 software was used to calculate the mean and standard deviation of the kinematic factors and to identify the difference between the experts and non-experts. Results: The angular displacement of the hip joint in both the expert and non-expert groups showed statistical significance on E1 and E4 of the left support foot and E5 of the right foot (p<.05). The angle displacement of the knee joint in both groups showed statistical significance on E4 of the left support foot, and E1 and E2 of the right foot (p<.05). The angular velocity of the lower leg in both groups showed no statistical significance on the left support foot but showed statistical significance on E2 and E6 of the right foot (p<.05). The angular velocity of the foot in both groups showed no statistical significance on the left support foot but showed statistical significance on E2 of the right foot (p<.05). The vertical ground reaction force in both groups showed statistical significance on E2 (p<.05). The center of pressure in all directions in both groups showed statistical significance (p<.5). Conclusion: While performing the repeated side kick (geodeupyeopchagi), the experts maintainedconsistency and stability of the angle of the support leg while the kick foot moved high and fast. On the other hand, the angle of the support foot of non-experts appeared inconsistent, and the kick foot was raised, relying on the support leg, resulting in unstable and inaccurate movement.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.159-166
• /
• 2016

In this paper, an active object tracking system basing on the pan/tilt-embedded stereo camera system is suggested and implemented. In the proposed system, once the face area of a target is detected from the input stereo image by using a YCbCr color model and phase-type correlation scheme and then, using this data as well as the geometric information of the tracking system, the distance and 3D information of the target are effectively extracted in real-time. Basing on these extracted data the pan/tilted-embedded stereo camera system is adaptively controlled and as a result, the proposed system can track the target adaptively under the various circumstance of the target. From some experiments using 480 frames of the test input stereo image, it is analyzed that a standard variation between the measured and computed the estimated target's height and an error ratio between the measured and computed 3D coordinate values of the target is also kept to be very low value of 1.03 and 1.18% on average, respectively. From these good experimental results a possibility of implementing a new real-time intelligent stereo target tracking and surveillance system using the proposed scheme is finally suggested.

• Korean small business review
• /
• v.42 no.1
• /
• pp.43-56
• /
• 2020

The technology conflict between the U.S. and China is deepening recently. The U.S.-China battle began as a national security issue but is comprehending as a U.S.'s check for China's rapid technological advancement. China is rapidly growing in several indexes including R&D expenditure, patent application, and publications, and is challenging the U.S. in 5G and Artificial Intelligence. In 2018, Huawei became the largest 5G network/equipment provider and second largest smart phone manufacturer in the world. Now, Huawei is outperforming at AI chipset manufacturing, Bigdata analysis and cloud, positioning to become a critical player in the 4th industrial revolution. The purpose of this research is to analyze the effect of recent Huawei issues to Korean SMEs focusing on the relation between Huawei and Korean companies; the cooperation status from the Global Value Chain (GVC) perpsective, and Korean government's policies related to Huawei's information security issues will be the three main frames for the analysis. Then, this research proposes policy implications such as increasing Korea's competitiveness in manufacturing and information security.