• Journal of Korea Multimedia Society
• /
• v.7 no.10
• /
• pp.1478-1484
• /
• 2004

This paper presents a method that controls facial expression in realtime of 3D avatar by having the user select a sequence of facial expressions in the space of facial expressions. The space of expression is created from about 2400 frames of facial expressions. To represent the state of each expression, we use the distance matrix that represents the distances between pairs of feature points on the face. The set of distance matrices is used as the space of expressions. Facial expression of 3D avatar is controled in real time as the user navigates the space. To help this process, we visualized the space of expressions in 2D space by using the Principal Component Analysis(PCA) projection. To see how effective this system is, we had users control facial expressions of 3D avatar by using the system. This paper evaluates the results.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4
• /
• pp.29-34
• /
• 2001

In this paper, we designed an LSF coefficient quantizer of the wideband speech codec that can produce high quality speech service. For the efficient LSF coefficient quantizer, the interframe correlation was used. Also we separately quantized the LSF coefficients with high and low interframe correlation. Predictive pyramid vector quantizer (PVQ) was used for quantizing the LSF coefficients with high interframe correlation, and PVQ was used for quantizing the LSF coefficients with low interframe correlation. Experiments show that the proposed UF quantizer can quantize LSF information in 40 bits/frame, with an average spectral distortion (SD) of 1 dB and less than 3.87% frames having SD greater than 2 dB.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.6
• /
• pp.499-508
• /
• 2023

In this paper, we propose a technique to estimate the coordinates of feature points existing on a 2D planar object in the three dimensional space. The proposed method detects multiple 3D features from the image, and excludes those which are not located on the plane. The proposed technique estimates the planar homography between the planar object in the 3D space and the camera image plane, and computes back-projection error of each feature point on the planar object. Then any feature points which have large error is considered as off-plane points and are excluded from the feature estimation phase. The proposed method is archived on the basis of the planar homography without any additional sensors or optimization algorithms. In the expretiments, it was confirmed that the speed of the proposed method is more than 40 frames per second. In addition, compared to the RGB-D camera, there was no significant difference in processing speed, and it was verified that the frame rate was unaffected even in the situation that the number of detected feature points continuously increased.

• The Journal of Engineering Research
• /
• v.2 no.1
• /
• pp.39-47
• /
• 1997

This paper presents a single board digital signal processing system which can perform two-dimensional (2-D) digital infinite impulse response (IIR) filtering in realtime. We have developed an architecture to provide not only the necessary computational power but also a balance of the system input/output and computational requirements. The architecture achieves large system throughput by using highly parallel processing at both the system and processor levels. It reduces system data communication requirements significantly by taking advantage of a custom-designed processor and by providing each processor with its own input and ouput channel. After system initialization, almost 100 percent of the time is used for data processing. Data transfers occur concurrently with data processing. The functional level simulation reveals that the system throughput can reach as high as one pixel per system cycle. With only 10MHz clock frequency system, it can implement up to fourth order 2-D IIR filters for video-rate data ($512\times512$ pixels per frame at 30 frames per second). If we increase the system frequency, the system can be used for the preprocessing and postprocessing of video signal of HDTV.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.875-888
• /
• 2013

The researches have recently progressed toward the use of the superelastic shape memory alloys (SMAs) to develop new smart control systems that reduce permanent deformation occurring due to severe earthquake events and that automatically recover original configuration. The superelastic SMA materials are unique metallic alloys that can return to undeformed shape without additional heat treatments only after the removal of applied loads. Once the superelastic SMA materials are thus installed at the place where large deformations are likely to intensively occur, the structural system can make the best use of recentering capabilities. Therefore, this study is intended to propose new buckling-restrained braced frames (BRBFs) with superelastic SMA bracing systems. In order to verify the performance of such bracing systems, 6-story braced frame buildings were designed in accordance with the current design specifications and then nonlinear dynamic analyses were performed at 2D frame model by using seismic hazard ground motions. Based on the analysis results, BRBFs with innovative SMA bracing systems are compared to those with conventional steel bracing systems in terms of peak and residual inter-story drifts. Finally, the analysis results show that new SMA bracing systems are very effective to reduce the residual inter-story drifts.

• Structural Engineering and Mechanics
• /
• v.48 no.6
• /
• pp.879-914
• /
• 2013

In part I of the article, formulation and characteristics of the several well-known structural geometrical nonlinear solution techniques were studied. In the present paper, the efficiencies and capabilities of residual load minimization, normal plane, updated normal plane, cylindrical arc length, work control, residual displacement minimization, generalized displacement control and modified normal flow will be evaluated. To achieve this goal, a comprehensive comparison of these solution methods will be performed. Due to limit page of the article, only the findings of 17 numerical problems, including 2-D and 3-D trusses, 2-D and 3-D frames, and shells, will be presented. Performance of the solution strategies will be considered by doing more than 12500 nonlinear analyses, and conclusions will be drawn based on the outcomes. Most of the mentioned structures have complex nonlinear behavior, including load limit and snap-back points. In this investigation, criteria like number of diverged and complete analyses, the ability of passing load limit and snap-back points, the total number of steps and analysis iterations, the analysis running time and divergence points will be examined. Numerical properties of each problem, like, maximum allowed iteration, divergence tolerance, maximum and minimum size of the load factor, load increment changes and the target point will be selected in such a way that comparison result to be highly reliable. Following this, capabilities and deficiencies of each solution technique will be surveyed in comparison with the other ones, and superior solution schemes will be introduced.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10C
• /
• pp.787-797
• /
• 2008

In this paper, we propose a fast disparity estimation method considering temporal and spatial redundancy based on a dynamic programming for stereo matching. For the first step, the dynamic programming is performed to estimate disparity vectors with correlation between neighboring pixels in an image. Next, we efficiently compensate regions, which disparity vectors are not allocated, with neighboring disparity vectors assuming that disparity vectors in same object are quite similar. Moreover, in case of video sequence, we can decrease a complexity with temporal redundancy between neighboring frames. For performance comparison, we generate an intermediate-view image using the estimated disparity vector. Test results show that the proposed algorithm gives $0.8{\sim}2.4dB$-increased PSNR(peak signal to noise ratio) compared to a conventional block matching algorithm, and the proposed algorithm also gives approximately 0.1dB-increased PSNR and $48{\sim}68%$-lower complexity compared to the disparity estimation method based on general dynamic programming.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.112-119
• /
• 1999

TMN5 has been used to evaluate the performance of H.263, the ITU-T/LBC standard of moving picture coding. As DCT is used as transform coding methods in TMN5, blocking effect exists seriously in reconstruction picture at low bit rate. In this pater, DWT is substituted for DCT and adaptive quantizer is designed while the structure of TMN5 is maintained to be excellent in the transplantation of conventional system. It has shown that average PSNR is reduced by 0.35dB in luminance but increased by 2dB in chrominance comparing with that of TMN5. As block effect is reduced in reconstruction picture, the subjective picture quality is better than that of TMN5. Picture drop is, also, reduced because much more frames are transmitted at same bit rate.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.06a
• /
• pp.5-8
• /
• 2016

키 프레임 추출 기법은 2차원 비오 영상을 3차원으로 재구성하기 위해 꼭 필요한 프레임을 선택하는 방법이다. 본 논문에서는 비디오에서 빠르게 프레임을 검사하며 최적의 키 프레임을 선택하는 기법을 제안한다. 제안하는 기법은 3차원 재구성을 위한 전처리 과정에 초점을 둔 것으로 프레임 간 대응점 비율 검사를 통해 프레임의 도약 강도를 결정하고 기하 모델 추정이 원활한 프레임을 선택한다. 이로부터 3차원 복원 후처리 과정을 통해 최종적인 3차원 점군(point cloud) 데이터를 획득한다. 실험을 통해 다른 기법과 성능을 비교했을 때, 제안하는 기법이 복원 소요 시간도 적게 들고 보다 밀집된 3차원 데이터를 얻을 수 있었다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.11
• /
• pp.87-96
• /
• 2012

This paper propose a development of surface permanent mount synchronous generator(SPMSG) for 5-phase 5Kw in order to study a polyphase ac machinery that keep hold of advantages more than traditional three-phase squirrel-cage induction motor, such as reducing a amplitude of torque pulsation decreasing electric noises, and increasing the reliability. Design methods of the generator use a development tools with Maxwell 2D and Simplorer. There are designed drawing of manufactured frames of the SPMSG. A amplitude and waveform of the generated electromotive force, FFT analysis of harmonics within output voltages, and reviewing a experiment results are shown by variable output frequency. We are presenting a design and manufacture methods for the SPMSG.