• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.9_10 s.146
• /
• pp.1359-1368
• /
• 2005

When we develop the tight-fit 2D pattern from the 3D scan data, segmentation of the 3D scan data into several parts is necessary to make a curved surface into a flat plane. In this study, Garland's method of triangle simplification was adopted to reduce the number of data point without distorting the original shape. The Runge-Kutta method was applied to make triangular patch from the 3D surface in a 2D plane. We also explored the detailed arrangement method of small 2D patches to make a tight-fit pattern for a male body. As results, minimum triangle numbers in the simplification process and efficient arrangement methods of many pieces were suggested for the optimal 2D pattern development. Among four arrangement methods, a block method is faster and easier when dealing with the triangle patches of male's upper body. Anchoring neighboring vertices of blocks to make 2D pattern was observed to be a reasonable arrangement method to get even distribution of stress in a 2D plane.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.1 s.149
• /
• pp.157-166
• /
• 2006

The human body, which is composed of concave and convex curvatures, makes it difficult to transfer into 2D patterns directly from 3D data. In previous studies. Jeong, et al.(2004) suggested the block method was fester and easier when dealing with the triangular patches of male's upper dress form. Although the block method is useful to make a pattern, the information(area, length, etc.) from a 2D pattern would be different depending on the direction of the block method. As a result horizontal and diagonal block methods were suggested as optimal methods for 2D tight-fitting patterns. These block methods were closer to the original area of the 3D scan data than the vertical block method. The total area of the 2D pattern obtained by the horizontal and diagonal block methods showed little differences. In case of the horizontal and diagonal block methods, the total error of the 2D pattern area ranged from $0.01\%\~0.25\%$. In comparing the length of the 2D pattern with that of the 3D scan data, the obtained 2D pattern was $0.1\~0.2cm$ shorter than the 3D scan data, which was within the acceptable range of errors in making clothes. 3D space distribution images between the body surface and the experimental clothing were also measured and $3\%$ enlargement of the original pattern was verified as the adequate adjustment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.2
• /
• pp.340-347
• /
• 2008

A prototype of 3D clothing design system with a direct pattern development function was suggested, reflecting intuitive design functions and design modifications while considering the fit of clothing patterns with the 3D human body in the virtual 3D space. The research method was as follows. Clothing models were created using a 3D design tool, 3ds max on the surface of 3D human body model made by scanning an actual human body. 3D illustrations were completed by revising the fit and sizing of the human body and clothing models. 2D T-shirt pattern was produced 3D illustrations using from a 3D scanning data modeling solution RapidForm 2004, a 2D conversion program for 3D data called 2C-AN, and Yuka CAD. As a result, the following conclusions were made. The fit of the clothing and human body can be adjusted by reflecting individual body figure characteristics and 3D illustrations over the actual 3D body model. Furthermore, intuitive design support functions were intensified overcoming the weak point of existing 3D clothing design system by developing the direct clothing design in the virtual 3D space. 3D illustration design modifications can be directly reflected on clothing patterns from 3D illustrations by 3D clothing design system developed in this study.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.1
• /
• pp.123-136
• /
• 2023

To develop smart sportswear capable of measuring biometric data, we created a close-fitting pattern using two- and three-dimensional (2D and 3D, respectively) methods. After 3D virtual fitting, the tightness of each pattern was evaluated using image processing of contact points, mesh deviation, and cross-sectional shapes. In contact-point analysis, the 3D pattern showed high rates of contact with the body (84.6% and 93.1% for shirts and pants, respectively). Compared with the 2D pattern, the 3D pattern demonstrated closer contact at the lower chest, upper arm, and thigh regions, where electrocardiography and electromyography were primarily carried out. The overall average gap was also lower in the 3D pattern (5.27 and 4.66 mm in shirts and pants, respectively). In the underbust, waist, thigh circumference, and mid-thigh circumference, the cross-section distance between clothing and body was showed a statistically significant difference and evenly distributed in the 3D pattern, exhibiting more closeness. The tightness and fit of the 3D smart sportswear sensor pattern were successfully evaluated. We believe that this study is critical, as it facilitates the comparison of different patterns through visualization and digitization through 3D virtual fitting.

• Korean Journal of Human Ecology
• /
• v.24 no.2
• /
• pp.255-266
• /
• 2015

In this study, we have developed the ergonomic pattern from the 3D human body reflecting cycling posture and extensibility of the stretch fabrics. Adjusting pressure level in the construction of athlete's tight-fitting stretch garments by reducing the original pattern is a challenging subject, which influence on the performance of the wearer directly. Therefore, in this study, relationships between the reduction rates of the 2D pattern obtained from the 3D human scan and resultant clothing pressure were explored to improve the fit and pressure exerted by reduced clothing pattern. Subjective wear sensations of the experimental garments were rated using a seven-point Likert scale on two consecutive days. While wearing the garments, subjects were asked to take five different postures including waist flexion, sitting and others. A Likert-type scale was used for the evaluation, with 7 points indicating the best fit in tight-fitting pants. Comparing 2/3T-pattern with T-pattern, the latter was superior to 2/3T-pattern in terms of adhere well to the waist and hip area in the 0.032 significance level. T-pattern was superior to 2/3T-pattern in terms of fitting and wear comfort. As results, the pattern obtained from the flexed body reflecting cycling posture already included the contraction and extension of the skin while cycling posture, so that the extra ease for movement and good fit was not need to be considered. The optimized reduction rates were determined with the proposed reduction rate, the resultant pressure range was within the range of $0.5{\sim}3.0gf/cm^2$ at eight locations on the body except front waist band and thigh band.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.7 s.144
• /
• pp.1008-1017
• /
• 2005

When we develop 2D pattern from replica of human body with small pieces, it is inevitable to have some replica pieces overlapped or departed. In this study, the optimized method of 2D pattern development from the 3D replica pieces was investigated using dress-form. Among six arrangement methods, anchoring two vertexes of a replica to neighboring vertexes of a next replica induces the optimized 2D pattern by evenly distributing stress across the 3D replica pieces. Anchoring neighboring vertexes resulted in automatic widening k overlapping (W & O) the interspaces among replicas of dress-form, thereby stress was distributed more evenly than any other method. W&O arrangement method was verified to be the best by examining the 3D space distribution images between body surface and twelve experimental garments.

• Korean Journal of Human Ecology
• /
• v.21 no.2
• /
• pp.299-314
• /
• 2012

The purpose of this study was to explore effects of pattern alteration using a virtual clothing simulation approach in combination with 3D analysis software. Three raglan sleeves of different patterns were worn by an avatar using virtual clothing simulation with silk and cotton as the test fabrics. It was observed that the silhouette and hemline shape were affected differently based on raglan sleeve pattern and fabric type. By examining clothing pressure distribution, the cotton fabric designs and pattern shapes provided for a variety of influences on armhole and bust regions as well as the back sleeve area. For representative locations, cross section circumstance, cross section area, and volume were measured by using 3D analysis and the resulting correlation between the 2D and 3D data were investigated. Among different fabrics, there was little difference between the 2D and 3D clothing surface area. However, when using 3D analysis, clothing volume was significantly affected by different fabrics and pattern types. By simultaneously adopting the virtual simulator and 3D analysis, quantitative assessment of virtual clothing simulation was successfully conducted. In light of the results of this study, the resulting methodology is expected to be used as a comprehensive evaluation tool for virtual clothing simulation wear testing.

• Fibers and Polymers
• /
• v.7 no.2
• /
• pp.195-202
• /
• 2006

Tight-fitting clothing pattern reflecting the accurate information of the 3D body shape has been one of the challenges for garment industry, however, fitting problems still exist. The objectives of the paper is to develop a 2D pattern which fits tightly to the 3D human scan data for sports suits that need comfort and function for maximum performance. In this study, the user graphic interface application software for the semi-automatic garment pattern generation has been implemented using the triangle simplification scheme together with 2D projections of free-falling of 3D surface polygons keeping the original 3D surface area preservation. A typical application of the developed pattern to the functional body suits is presented and verification of the proposed method is also provided.

• The Research Journal of the Costume Culture
• /
• v.16 no.5
• /
• pp.852-862
• /
• 2008

The purpose of this paper is to find how to do the width of skirt and the girth of the waist in the adequate pattern making for the obese women's skirt. Appearance test of the five experimental skirts was evaluated by the four experts in clothing construction. At the same time, 3D clothing air volume was observed for the five types of experimental skirt with different size specifications. The results from the appearance test were as follows; when the width of skirt pattern is set for(the shell girth/2), it was suggested w/4+1(front), w/4(back) for girth of the waist. On one hand, in case of (the shell girth of front)/2+(the shell girth of back)/2, it was suggested(the waist girth of front)/2 and(waist girth of back)/2 for obese women's skirt with the best appearance. As results, it was found that the width of skirt pattern for the obese women should be the greatest shell girth instead of hip girth. In the case of the hip girth, the amount of ease on hip was suggested 6cm. It was found that pattern with the wrinkle of ease was full of the gaps between body and skirt in 3D clothing air volume. In spreading out to 2D flat pattern from 3D scan data, when the width of skirt pattern was set for(the shell girth of front)/2+(the shell girth of back)/2, it was suggested(the waist girth of front/2)+(the waist girth of back/2) than the shell girth/2 in girth of the waist for the best appearance. And the conversion of 3D scan data into 2D flat pattern in curve shape of crosswise had to spread out of the plane in straight line. The obese women's clothing should be manufactured with systematical consideration of the diversity and scarcity of the obese women's body shape.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.11
• /
• pp.1536-1543
• /
• 2004

Garment is made by a 2D pattern and should be fitted to a human body which has 3D characteristics. Therefore, to design a pattern more effectively, the use of 3D information of a human body and the investigation of relationship between the 3D garment and 2D pattern are necessary. In this work, ruled surface method was used to reflect the 3D information of a human body for a pattern design. The images of the brassiere line on the woman's dress form were captured by phase-shifting projection moire system and the 3D information on the design line was obtained. 2D patterns on the various parts of the brassiere were developed directly from the 3D data by the ruled surface method. In addition, design line, the area and the amount of dart were quantified. And then we verify the appropriateness of the ruled surface method to the 2D pattern development by measuring the distribution of the space between women's figure and segmented clothing item. It was found that the ruled surface method is useful to transform the 3D design line to the 2D pattern, if we followed the steps suggested in this paper.