• Journal of applied mathematics & informatics
• /
• 제31권1_2호
• /
• pp.221-228
• /
• 2013

The method of upper and lower solutions and the generalized quasilinearization technique is developed for the existence and approximation of solutions to boundary value problems for higher order fractional differential equations of the type $^c\mathcal{D}^qu(t)+f(t,u(t))=0$, $t{\in}(0,1),q{\in}(n-1,n],n{\geq}2$ $u^{\prime}(0)=0,u^{\prime\prime}(0)=0,{\ldots},u^{n-1}(0)=0,u(1)={\xi}u({\eta})$, where ${\xi},{\eta}{\in}(0,1)$, the nonlinear function f is assumed to be continuous and $^c\mathcal{D}^q$ is the fractional derivative in the sense of Caputo. Existence of solution is established via the upper and lower solutions method and approximation of solutions uses the generalized quasilinearization technique.

• 대한기계학회논문집A
• /
• 제24권12호
• /
• pp.3040-3052
• /
• 2000

For effective construction of second-order response surface models, an efficient quad ratic approximation method is proposed in the context of trust region model management strategy. In the proposed method, although only the linear and quadratic terms are uniquely determined using 2n+1 design points, the two-factor interaction terms are mathematically updated by normalized quasi-Newton formula. In order to show the numerical performance of the proposed approximation method, a sequential approximate optimizer is developed and solves a typical unconstrained optimization problem having 2, 6, 10, 15, 30 and 50 design variables, a gear reducer system design problem and two dynamic response optimization problems with multiple objectives, five objectives for one and two objectives for the other. Finally, their optimization results are compared with those of the CCD or the 50% over-determined D-optimal design combined with the same trust region sequential approximate optimizer. These comparisons show that the proposed method gives more efficient than others.

• 지구물리와물리탐사
• /
• 제2권2호
• /
• pp.86-95
• /
• 1999

이 연구에서는 적분방정식의 근사해를 이용한 3차원 모델링 알고리듬을 구성하고 그 효율성을 분석하였다. 전기장 적분방정식에 확장 Born 근사(extended Born approximation)를 적용시켜 알고리듬을 구성하였으며 모델링의 계산 속도를 향상시키기 위하여 Green 텐서 적분을 공간 주파수 영역에서 수행하였다. 이 방법은 연속 함수로 표현되는 전기전도도를 갖는 이상체에 대한 모델 계산을 가능하게 하고, Green 텐서 적분시 발생하는 특이치 문제가 발생하지 않는 장점이 있다 얇은 전도체에 대한 모델링 계산 결과를 적분방정식의 해와 비교하여 알고리듬의 타당성을 검증하였다. 전기전도도 물성차, 사용 송신원의 주파수에 따른 개발된 알고리듬의 분석을 통하여 물성차 1:16 정도, 사용주파수는 100 Hz-100 kHz까지 정확한 결과를 얻었다. 그러나, 확장 Born 근사는 송신원과 모델의 상대적인 위치에 따라 오차를 나타내었다. 한편, 연속적인 전기전도도 함수를 갖는 모델에 대한 이 알고리듬의 적용성를 알아보기 위하여 서로 다른 전기전도도를 갖는 두 이상체가 접합한 모델에 대하여 적분방정식의 해와 비교하였으며 양호한 결과를 나타내었다.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1984년도 추계학술발표회논문집
• /
• pp.82-87
• /
• 1984

A 2-D digital filter with rational frequency response can be expanded into an infinite sequence of filterins operations. Each filtering operation can be implemented by convolution with a Low-order 20D finite-extent impulse response. If a convergence constraint is satisfied, the sequence of estimates will approach the desired output signal. In practice, as the number of iterations is finite, the frequency response implemented by iterative computations is an approximation to the desired rational frequency response.

• 한국정보통신학회논문지
• /
• 제18권1호
• /
• pp.129-134
• /
• 2014

본 논문은 디지털-아날로그 변환기(DAC: digital-to-analog converter), SAR 로직, 그리고 비교기로 구성된 10-bit 10-MS/s 비동기 축차근사형(SAR: successive approximation register) 아날로그-디지털 변환기(ADC: analog-to-digital converter)를 제안한다. Rail-to-rail의 입력 범위를 가지는 설계된 비동기 축차근사형 아날로그-디지털 변환기는 샘플링 속도를 향상시키기 위해 MOM(metal-oxide-metal) 커패시터를 이용한 바이너리 가중치 기반의 디지털-아날로그 변환기를 사용하여 구현한다. 제안하는 10-bit 10-MS/s 비동기 축차근사형 아날로그-디지털 변환기는 0.18-${\mu}m$ CMOS 공정에서 제작되고 면적은 $0.103mm^2$를 차지한다. 1.1 V의 공급전압에서 전력소모는 0.37 mW를 나타낸다. 101.12 kHz와 5.12 MHz의 아날로그 입력 신호에 대해 측정된 SNDR은 각각 54.19 dB와 51.59 dB이다.

• Journal of Photoscience
• /
• 제11권1호
• /
• pp.11-17
• /
• 2004

Fluorescence quenching of l,4-bis [2-(2-methylphenyl) ethenyl]-benzene (Bis-MSB) by carbon tetrachloride in five different solvents namely hexane, cyclohexane, toluene, benzene and dioxane has been carried out at room temperature with a view to understand the quenching mechanisms. The Stern-Volmer plot has been found to be non-linear with a positive deviation for all the solvents studied. In order to interpret these results we have invoked the Ground state complex and Sphere of action static quenching models. Using these models various rate parameters have been determined. The magnitudes of these parameters imply that sphere of action static quenching model agrees well with the experimental results. Hence the positive deviation in the Stem-Volmer plots is attributed to the static and dynamic quenching. Further, with the use of Finite Sink approximation model, it was possible to check whether these bimolecular reactions as diffusion limited and to estimate independently distance parameter R' and mutual diffusion coefficient D. Finally an effort has been made to correlate the values of R'and D with the values of the encounter distance R and the mutual diffusion coefficient D determined using the Edwardis empirical relation and Stokes-Einstein relation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1601-1606
• /
• 1991

We present an algorithm to approximate the Voronoi diagrams of 2D objects bounded by algebraic curves. Since the bisector curve for two algebraic curves of degree d can have a very high algebraic degree of 2 * d$^{4}$, it is very difficult to compute the exact algebraic curve equation of Voronoi edge. Thus, we suggest a simple polygonal approximation method. We first approximate each object by a simple polygon and compute a simplified polygonal Voronoi diagram for the approximating polygons. Finally, we approximate each monotone polygonal chain of Voronoi edges with Bezier cubic curve segments using least-square curve fitting.

• 한국경영과학회지
• /
• 제17권2호
• /
• pp.91-106
• /
• 1992

It an inventory control system, the demand over time are often assumed to be independently identically distributed (i. i. d.). However, the demands may well be correlated over time in many situations. The estimation of reorder points is not simple for correlated demands with variable lead time. In this paper, a general class of autoregressive and moving average processes is considered for modeling the demands of an inventory item. The first four moments of the lead-time demand (L) are derived and used to approximate the distribution of L. The reorder points at given service level are then estimated by the three approximation methods : normal approximation, Charlier series and Pearson system. Numerical investigation shows that the Pearson system and the Charlier series performs extremely well for various situations whereas the normal approximation show consistent underestimation and sensitive to the distribution of lead time. The same conclusion can be reached when the parameters are estimated from the sample based on the simulation study.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권4호
• /
• pp.180-183
• /
• 2004

This paper presents a description of the point collocation method and its application to the electromagnetic field computation. The interpolation scheme is based on the fast moving least square reproducing kernel approximation. In the method, the integration cell is not required and the essential boundary conditions can be enforced directly. Numerical simulations on 1-D and 2-D problems are carried out to validate the method. It is found that computational efficiency is higher than the general mesh-free methods.

• 대한수학회보
• /
• 제34권2호
• /
• pp.259-271
• /
• 1997

Let K be a nonempty subset of a normed linear space X and let x $\in$ X. An element k$_0$ in K satisfying $\$\mid$$x - k$_0$$\$\mid$$ = d(x, K) := (equation omitted) $\$\mid$$x - k$\$\mid$$ is called a best approximation to x from K. For any x $\in$ X, the set of all best approximations to x from K is denoted by P$_K$(x) = {k $\in$ K : $\$\mid$$ x - k $\$\mid$$ = d(x, K)}. (omitted)