• 제목/요약/키워드: 2D X-Y table

검색결과 36건 처리시간 0.031초

논벼 장.단간품종의 증발산제계수와 건물량과의 관계에 대한 연구(I) (Studies on Relations between Various Coeffcients of Evapo-Transpiration and Quantities of Dry Matters for Tall-and Short Statured Varieties of Paddy Rice)

  • 류한열;김철기
    • 한국농공학회지
    • /
    • 제16권2호
    • /
    • pp.3361-3394
    • /
    • 1974
  • The purpose of this thesis is to disclose some characteristics of water consumption in relation to the quantities of dry matters through the growing period for two statured varieties of paddy rice which are a tall statured variety and a short one, including the water consumption during seedling period, and to find out the various coefficients of evapotranspiration that are applicable for the water use of an expected yield of the two varieties. PAL-TAL, a tall statured variety, and TONG-lL, a short statured variety were chosen for this investigation. Experiments were performed in two consecutive periods, a seedling period and a paddy field period, In the investigation of seedling period, rectangular galvanized iron evapotranspirometers (91cm${\times}$85cm${\times}$65cm) were set up in a way of two levels (PAL-TAL and TONG-lL varieties) with two replications. A standard fertilization method was applied to all plots. In the experiment of paddy field period, evapotanspiration and evaporation were measured separately. For PAL-TAL variety, the evapotranspiration measurements of 43 plots of rectangular galvanized iron evapotranspirometer (91cm${\times}$85cm${\times}$65cm) and the evaporation measurements of 25 plots of rectangular galvanized iron evaporimeter (91cm${\times}$85cm${\times}$15cm) have been taken for seven years (1966 through 1972), and for TONG-IL variety, the evapotranspiration measurements of 19 plots and the evaporation measurements of 12 plots have been collected for two years (1971 through 1972) with five different fertilization levels. The results obtained from this investigation are summarized as follows: 1. Seedling period 1) The pan evaporation and evapotranspiration during seedling period were proved to have a highly significant correlation to solar radiation, sun shine hours and relative humidity. But they had no significant correlation to average temperature, wind velocity and atmospheric pressure, and were appeared to be negatively correlative to average temperature and wind velocity, and positively correlative to the atmospheric pressure, in a certain period. There was the highest significant correlation between the evapotranspiration and the pan evaporation, beyond all other meteorological factors considered. 2) The evapotranpiration and its coefficient for PAL-TAL variety were 194.5mm and 0.94∼1.21(1.05 in average) respectively, while those for TONG-lL variety were 182.8mm and 0.90∼1.10(0.99 in average) respectively. This indicates that the evapotranspiration for TONG-IL variety was 6.2% less than that for PAL-TAL variety during a seedling period. 3) The evapotranspiration ratio (the ratio of the evapotranspiration to the weight of dry matters) during the seedling period was 599 in average for PAL-TAL variety and 643 for TONG-IL variety. Therefore the ratio for TONG-IL was larger by 44 than that for PAL-TAL variety. 4) The K-values of Blaney and Criddle formula for PAL-TAL variety were 0.78∼1.06 (0.92 in average) and for TONG-lL variety 0.75∼0.97 (0.86 in average). 5) The evapotranspiration coefficient and the K-value of B1aney and Criddle formular for both PAL-TAL and TONG-lL varieties showed a tendency to be increasing, but the evapotranspiration ratio decreasing, with the increase in the weight of dry matters. 2. Paddy field period 1) Correlation between the pan evaporation and the meteorological factors and that between the evapotranspiration and the meteorological factors during paddy field period were almost same as that in case of the seedling period (Ref. to table IV-4 and table IV-5). 2) The plant height, in the same level of the weight of dry matters, for PAL-TAL variety was much larger than that for TONG-IL variety, and also the number of tillers per hill for PAL-TAL variety showed a trend to be larger than that for TONG-IL variety from about 40 days after transplanting. 3) Although there was a tendency that peak of leaf-area-index for TONG-IL variety was a little retarded than that for PAL-TAL variety, it appeared about 60∼80 days after transplanting. The peaks of the evapotranspiration coefficient and the weight of dry matters at each growth stage were overlapped at about the same time and especially in the later stage of growth, the leaf-area-index, the evapotranspiration coefficient and the weight of dry matters for TONG-IL variety showed a tendency to be larger then those for PAL-TAL variety. 4) The evaporation coefficient at each growth stage for TONG-IL and PAL-TALvarieties was decreased and increased with the increase and decrease in the leaf-area-index, and the evaporation coefficient of TONG-IL variety had a little larger value than that of PAL-TAL variety. 5) Meteorological factors (especially pan evaporation) had a considerable influence to the evapotranspiration, the evaporation and the transpiration. Under the same meteorological conditions, the evapotranspiration (ET) showed a increasing logarithmic function of the weight of dry matters (x), while the evaporation (EV) a decreasing logarithmic function of the weight of dry matters; 800kg/10a x 2000kg/10a, ET=al+bl logl0x (bl>0) EV=a2+b2 log10x (a2>0 b2<0) At the base of the weight of total dry matters, the evapotranspiration and the evaporation for TONG-IL variety were larger as much as 0.3∼2.5% and 7.5∼8.3% respectively than those of PAL-TAL variety, while the transpiration for PAL-TAL variety was larger as much as 1.9∼2.4% than that for TONG-IL variety on the contrary. At the base of the weight of rough rices the evapotranspiration and the transpiration for TONG-IL variety were less as much as 3.5% and 8.l∼16.9% respectively than those for PAL-TAL variety and the evaporation for TONG-IL was much larger by 11.6∼14.8% than that for PAL-TAL variety. 6) The evapotranspiration coefficient, the evaporation coefficient and the transpiration coefficient and the transpiration coefficient were affected by the weight of dry matters much more than by the meteorological conditions. The evapotranspiratioa coefficient (ETC) and the evaporation coefficient (EVC) can be related to the weight of dry matters (x) by the following equations: 800kg/10a x 2000kg/10a, ETC=a3+b3 logl0x (b3>0) EVC=a4+b4 log10x (a4>0, b4>0) At the base of the weights of dry matters, 800kg/10a∼2000kg/10a, the evapotranspiration coefficients for TONG-IL variety were 0.968∼1.474 and those for PAL-TAL variety, 0.939∼1.470, the evaporation coefficients for TONG-IL variety were 0.504∼0.331 and those for PAL-TAL variety, 0.469∼0.308, and the transpiration coefficients for TONG-IL variety were 0.464∼1.143 and those for PAL-TAL variety, 0.470∼1.162. 7) The evapotranspiration ratio, the evaporation ratio (the ratio of the evaporation to the weight of dry matters) and the transpiration ratio were highly affected by the meteorological conditions. And under the same meteorological condition, both the evapotranspiration ratio (ETR) and the evaporation ratio (EVR) showed to be a decreasing logarithmic function of the weight of dry matters (x) as follows: 800kg/10a x 2000kg/10a, ETR=a5+b5 logl0x (a5>0, b5<0) EVR=a6+b6 log10x (a6>0 b6<0) In comparison between TONG-IL and PAL-TAL varieties, at the base of the pan evaporation of 343mm and the weight of dry matters of 800∼2000kg/10a, the evapotranspiration ratios for TONG-IL variety were 413∼247, while those for PAL-TAL variety, 404∼250, the evaporation ratios for TONG-IL variety were 197∼38 while those for PAL-TAL variety, 182∼34, and the transpiration ratios for TONG-IL variety were 216∼209 while those for PAL-TAL variety, 222∼216 (Ref. to table IV-23, table IV-25 and table IV-26) 8) The accumulative values of evapotranspiration intensity and transpiration intensity for both PAL-TAL and TONG-IL varieties were almost constant in every climatic year without the affection of the weight of dry matters. Furthermore the evapotranspiration intensity appeared to have more stable at each growth stage. The peaks of the evapotranspiration intensity and transpiration intensity, for both TONG-IL and PAL-TAL varieties, appeared about 60∼70 days after transplanting, and the peak value of the former was 128.8${\pm}$0.7, for TONG-IL variety while that for PAL-TAL variety, 122.8${\pm}$0.3, and the peak value of the latter was 152.2${\pm}$1.0 for TONG-IL variety while that for PAL-TAL variety, 152.7${\pm}$1.9 (Ref.to table IV-27 and table IV-28) 9) The K-value in Blaney & Criddle formula was changed considerably by the meteorological condition (pan evaporation) and related to be a increasing logarithmic function of the weight of dry matters (x) for both PAL-TAL and TONG-L varieties as follows; 800kg/10a x 2000kg/10a, K=a7+b7 logl0x (b7>0) The K-value for TONG-IL variety was a little larger than that for PAL-TAL variety. 10) The peak values of the evapotranspiration coefficient and k-value at each growth stage for both TONG-IL and PAL-TAL varieties showed up about 60∼70 days after transplanting. The peak values of the former at the base of the weights of total dry matters, 800∼2000kg/10a, were 1.14∼1.82 for TONG-IL variety and 1.12∼1.80, for PAL-TAL variety, and at the base of the weights of rough rices, 400∼1000 kg/10a, were 1.11∼1.79 for TONG-IL variety and 1.17∼1.85 for PAL-TAL variety. The peak values of the latter, at the base of the weights of total dry matters, 800∼2000kg/10a, were 0.83∼1.39 for TONG-IL variety and 0.86∼1.36 for PAL-TAL variety and at the base of the weights of rough rices, 400∼1000kg/10a, 0.85∼1.38 for TONG-IL variety and 0.87∼1.40 for PAL-TAL variety (Ref. to table IV-18 and table IV-32) 11) The reasonable and practicable methods that are applicable for calculating the evapotranspiration of paddy rice in our country are to be followed the following priority a) Using the evapotranspiration coefficients based on an expected yield (Ref. to table IV-13 and table IV-18 or Fig. IV-13). b) Making use of the combination method of seasonal evapotranspiration coefficient and evapotranspiration intensity (Ref. to table IV-13 and table IV-27) c) Adopting the combination method of evapotranspiration ratio and evapotranspiration intensity, under the conditions of paddy field having a higher level of expected yield (Ref. to table IV-23 and table IV-27). d) Applying the k-values calculated by Blaney-Criddle formula. only within the limits of the drought year having the pan evaporation of about 450mm during paddy field period as the design year (Ref. to table IV-32 or Fig. IV-22).

  • PDF

PREDICTION OF DAILY MAXIMUM X-RAY FLUX USING MULTILINEAR REGRESSION AND AUTOREGRESSIVE TIME-SERIES METHODS

  • Lee, J.Y.;Moon, Y.J.;Kim, K.S.;Park, Y.D.;Fletcher, A.B.
    • 천문학회지
    • /
    • 제40권4호
    • /
    • pp.99-106
    • /
    • 2007
  • Statistical analyses were performed to investigate the relative success and accuracy of daily maximum X-ray flux (MXF) predictions, using both multilinear regression and autoregressive time-series prediction methods. As input data for this work, we used 14 solar activity parameters recorded over the prior 2 year period (1989-1990) during the solar maximum of cycle 22. We applied the multilinear regression method to the following three groups: all 14 variables (G1), the 2 so-called 'cause' variables (sunspot complexity and sunspot group area) showing the highest correlations with MXF (G2), and the 2 'effect' variables (previous day MXF and the number of flares stronger than C4 class) showing the highest correlations with MXF (G3). For the advanced three days forecast, we applied the autoregressive timeseries method to the MXF data (GT). We compared the statistical results of these groups for 1991 data, using several statistical measures obtained from a $2{\times}2$ contingency table for forecasted versus observed events. As a result, we found that the statistical results of G1 and G3 are nearly the same each other and the 'effect' variables (G3) are more reliable predictors than the 'cause' variables. It is also found that while the statistical results of GT are a little worse than those of G1 for relatively weak flares, they are comparable to each other for strong flares. In general, all statistical measures show good predictions from all groups, provided that the flares are weaker than about M5 class; stronger flares rapidly become difficult to predict well, which is probably due to statistical inaccuracies arising from their rarity. Our statistical results of all flares except for the X-class flares were confirmed by Yates' $X^2$ statistical significance tests, at the 99% confidence level. Based on our model testing, we recommend a practical strategy for solar X-ray flare predictions.

기지 패턴의 카메라 Calibration에 기반한 물체의 깊이 데이터 추출에 관한 연구 (A Study on Depth Data Extraction for Object Based on Camera Calibration of Known Patterns)

  • 조현우;서경호;김태효
    • 융합신호처리학회 학술대회논문집
    • /
    • 한국신호처리시스템학회 2001년도 하계 학술대회 논문집(KISPS SUMMER CONFERENCE 2001
    • /
    • pp.173-176
    • /
    • 2001
  • 본 논문에서는, 기지패턴에 대한 카메라 Calibration을 이용하여 물체의 깊이정보를 추출하기 위한 새로운 계측시스템을 구축하였다. 3차원 실세계좌표와 2차원 영상좌표계의 관계를 해석하였고, 이로부터 카메라의 Calibration 알고리즘을 확립하여 카메라의 내부 변수와 외부 변수를 구하였다. 3차원 공간의 계측면을 평면으로 가정하고 평면의 방정식과 좌표계 변환 방정식으로부터 뉴-턴 랩슨법을 이용하여 최소 값에 대응하는 근사치로 깊이정보를 추출하고 실시간 처리를 위해 이를 Look-up 테이블에 저장하였다. 실험시스템에서 슬릿 레이저 투광기를 물체에 조사하고 이로부터 x-z평면의 2D 영상을 획득하였다. 이 과정을 물체를 이동시키면서 연속으로 획득하여 3D 영상 정보를 얻었다. 3D 형상을 모니터에 표시하기 위해 OpenGL을 이용하여 계측된 3D 형상을 얻을 수 있었다. 계측 결과, 분해능에서 약 1%의 오차가 발생하였으며, 이는 선형 모-터의 진동성분과 계측시스템의 광학적 오차에 기인된 것이라 판단되었다. 이를 개선하기 위해 기구적 시스템의 안정과 정밀용 카메라를 사용하므로 해결할 수 있으리라 판단된다.

  • PDF

웜홀 방식 망에서의 효율적인 완전교환 통신 알고리즘 (Efficient All-to-All Personalized Communication Algorithms in Wormhole Networks)

  • 김시관;맹승렬;조정완
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제27권5호
    • /
    • pp.464-474
    • /
    • 2000
  • 완전교환 통신은 행렬전이, 푸리에변환 혹은 분산 테이블 검색과 같은 여러 가지 응용에서 아주 많이 활용되는 통신 방법이다. 본 논문은 웜홀 방식을 채용한 2차원 토러스에서의 개시 지연 시간을 줄이기 위하여 분할 및 합병 (divide-and-conquer) 방식을 사용한 효율적인 완전교환 통신 알고리즘을 제 안한다. 전체망을 2x2 형태의 기본셀로 분할한 뒤 각 기본셀에서는 마스터노드라고 불리는 특정 노드를 지정하여 기본셀내의 여타 노드들의 메시지를 이 마스터노드가 수집한다. 이 마스터노드들이 다른 모든 노드로 보내질 메시지를 수집한 뒤 각 기본셀내의 모든 마스터 노드들만이 가상 망을 형성하여 망의 크기가 N/2 x N/2으로 줄어든 상태로 완전 교환 알고리즘을 수행한다. 마스터노드들간의 완전교환 연산을 수행 한 뒤 이 마스터노드들은 자기가 전담했던 여타 노드들의 메시지를 재분배해 줌으로써 주어진 완전교환 연산을 완료한다. 기존의 여러 가지 알고리즘과의 비교 분석을 제시하였으며 제시한 알고리즘이 약 2배 정도의 개시 지연시간 면에서 우수함을 보인다.

  • PDF

X線螢光分析에 依한 珪酸鹽鑛物의 分析 (The X-Ray Fluorescent Spectrographic Analysis of Silicate Minerals)

  • 김찬국;상기남;김황암
    • 대한화학회지
    • /
    • 제13권1호
    • /
    • pp.49-55
    • /
    • 1969
  • 螢光X線을 利用하여 珪酸鹽鑛物中의 主成分인 $SiO_2$, $Al_2O_3$, $Fe_2O_3$, CaO, MgO 및 $K_2O$를 迅速히 分析할 目的으로 試料의 處理 測定 및 各條件에 對하여 檢討하였다. 試料를 Lithium Tetraborate로 용융하여 300Mesh 以上의 微粉末로 한後 40,000Lb의 壓力으로 成型하여 Tungsten과 Chromium 對陰極의 X-線管과 LiF, EDDT, ADP의 分光結晶을 使用하여 測定하였다. 各成分에 對한 檢量曲線은 Matrix Effect를 고려하여 N.B.S 및 International Rock Standard를 選定 使用하였고 Lanthanum Oxide 및 Binder로서 Borie Acid를 첨가하여 얻었다. 各成分에 對하여 本法의 再現性 및 誤差를 檢討하기를 爲하여 I.R.S T-1을 使用하여 測定한 結果 0.47($SiO_2$), 0.85($Al_2O_3$), 0.05($Fe_2O_3$), 0.07(caO), 0.02($K_2O$), 0.13(MgO)의 標準偏差를 얻었다. 또한 化學分析植에 對한 偏差를 求하고져 Clay, Kaoline, Alunite, Wallastonite 및 Zeolite 等의 珪酸鹽鑛物을 選定하여 化學分析 및 本法에 依한 分析結果를 비교하였다.

  • PDF

$CO_2$레이저 클래딩 (A Study on Cladding using the $CO_2$ Laser)

  • 윤상원;강영주;김재도
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 1996년도 특별강연 및 추계학술발표 개요집
    • /
    • pp.186-190
    • /
    • 1996
  • Laser cladding is a technique for modification on surface in materials. This study describes a laser cladding equipment design and the results of laser cladding nickel on rolled steel for general structure. The laser clsdding equipment designed to consider continuous supply, a fixed quantity. The material used MC plastic. Laser cladding condition is found out by processing parameters. The experiment advanced to suppy substrate with powder. The substrate is rolled steel for general structure(KS D 3503) and powder is using the nickel powder for the corrosion resitance, wear resistance and surface hardness of materials. When the substrate travel on X-Y table, laser beam irradiates to prevent from oxidize with shielding gas on it. The obtained specimens measure the victors hardness test. For the research laser cladding results make a comparative study the microstructure.

  • PDF

임분생장량(林分生長量) 추정(推定)에 관(關)한 연구(硏究) (Study on the Estimation of Volume Increment for the Pitch Pine Forest)

  • 이여하
    • 한국산림과학회지
    • /
    • 제18권1호
    • /
    • pp.9-12
    • /
    • 1973
  • 1. 본(本) 조사(調査) 16년생(年生)의 리기다소나무임분(林分)에 대(對)한 재적생장량(材積生長量)과 장래(將來)의 임분재적예측(林分材積豫測) 임분표법(林分表法)에 의하여 추정(推定)한 것이다. 2. 직경성장량(直徑成長量) 조사(調査)는 'Meyer'의 Increment borer법(法)에 의하고 단목재적(單木材積)은 기(旣) 조사(調査)된 V=0.000058 $D^{1.8}{\times}{\cdot}H^{1.1}$의 재적식(材積式)에 의하여 각각(各各) 조사(調査)되었다. 3. 0.33ha의 표준지(標準地)를 설정(設定)하고 표준지내(標準地內) 339본(本)의 임목(林木)에 대(對)하여 95%의 신뢰도(信賴度)로서 조사(調査)한 결과(結果)는 다음과 같다. 1) 직경(直徑)에 대(對)한 직경연년성장량(直徑連年成長量)의 회귀식(回歸式)은 Y=0.1618 +0.0298x. 이다. 2) 2cm 괄약(括約)의 직경분포(直徑分布)에서 전임목(全林木) 본수(本數)의 약(約) 90%가 완전(完全) 1계급(階級) 진급(進級)을 하였다. 3) 임분재적성장율(林分材積成長率)은 16%의 고도(高度)의 성장율(成長率)을 나타냈다. 4) 5개년간(個年間)의 재적성장량(材積成長量)은 46%의 증가율(增加率) 보이고있다.

  • PDF

온보드 영상장치(On-Board Imager) 및 콘빔CT(CBCT)를 이용한 환자 자세 검증의 유용성에 대한 연구 (A Study on the Availability of the On-Board Imager(OBI) and Cone-Beam CT(CBCT) in the Verification of Patient Set-up)

  • 박진호;박성호;박석원
    • Radiation Oncology Journal
    • /
    • 제26권2호
    • /
    • pp.118-125
    • /
    • 2008
  • 목적: 온보드 영상장치(On-Board Imager, OBI) 및 콘빔CT(Cone Beam Computerized Tomography, CBCT)를 이용하면 치료실에 위치한 환자의 자세 및 위치와 모의치료 시점의 환자의 자세 및 위치를 비교할 수 있다. 온라인 영상유도방사선치료(on-line Image Guided Radiation Therapy, on-line IGRT)에서는 이러한 정보를 이용하여 방사선 치료 직전에 환자의 위치를 확인하고 보정한다. 이때 모의치료 시 획득한 영상과 치료실에서 실시간 얻은 kV X선 영상 또는 콘빔CT 영상을 이용하여 2차원/2차원 맞춤(2D/2D Match) 또는 3차원/3차원 맞춤(3D/3D Match)의 이미지 퓨젼 프로그램을 사용하여 그 편차를 산출한다. 이 과정에서 주어지는 편차가 환자 자세에 대한 오차를 정확히 반영하고 있는지에 대해 알아보고자 한다. 대상 및 방법: 신체 내부 구조가 모사된 팬톰(The $RANDO^{(R)}$ Phantom, Alderson Research Laboratories Inc., Stamford, CT, USA)을 사용하여 실제 방사선 치료와 동일한 과정을 따라 모의치료 및 치료계획을 시행한 후 치료 테이블 위에 팬톰을 셋업한다. 그리고 모의치료 시 표시된 팬톰의 표면 지점에 치료실의 레이저에 일치시킨다. 이때, CT 모의치료실과 가속기가 있는 치료실의 벽면 고정 레이저에 대한 정렬의 일치만 확인하면, 치료테이블에 놓여진 팬톰의 위치는 모의치료 시 위치와 정확히 일치한다. 실제로는 팬톰 표면에 나타나는 레이저 선의 두께 정도되는 오차를 무시한다면, 두 시점에서 팬톰의 위치가 정확히 같다고 말할 수 있다. 정확히 위치가 재현되었다고 가정되는 팬톰에 대해 평행이동 또는 회전이동의 변화를 만들어 준 후, 위치가 옮겨지고 틀어진 팬톰에 대해 온보드 영상장치로부터 kV X선 영상을 그리고 콘빔CT로부터 CT 영상을 얻는다. kV X선 영상과 모의치료 시 획득한 CT영상을 이용하여 OBI 프로그램에서 제공되는 2차원/2차원 맞춤의 결과를 얻는다. 그리고 콘빔CT 영상과 모의치료 시 획득한 CT영상을 가지고 이미지 퓨젼 과정을 거쳐 3차원/3차원 맞춤의 결과를 얻는다. 이렇게 얻은 2차원/2차원 맞춤 및 3차원/3차원 맞춤의 결과와 처음에 팬톰에 인위적으로 만들어준 위치 변화를 비교한다. 결과: 온보드 영상장치로 획득한 kV X선 영상과 모의치료 시 영상을 비교하는 2차원/2차원 맞춤에서는 팬톰의 위치에 회전이동만 존재한다고 가정했을 때에는 평균 $0.06^{\circ}$의 오차 내에서 모의치료 시 팬톰의 위치에 대한 편차를 찾을 수 있었다. 또한 평행이동만 존재한다고 가정했을 때에는 편차 벡터의 크기가 평균 1.8 mm였다. 그리고 회전이동과 평행이동이 동시에 존재하는 일반적인 경우에는 편차 벡터의 크기는 평균 2.1 mm, 테이블 회전 방향으로 평균 $0.3^{\circ}$의 오차 내에서 모의치료 시 팬톰의 위치를 찾을 수 있었다. 콘빔CT로 획득한 영상을 이용하는 3차원/3차원 맞춤의 과정에서 팬톰의 위치가 회전이동만 존재할 때에는 평균 $0.03^{\circ}$의 오차 내에서, 평행이동만 있는 경우는 편차 벡터의 크기의 평균이 0.16 mm 내에서, 틀어지고 이동된 팬톰의 위치를 찾을 수 있었다. 그리고 회전이동과 평행이동이 동시에 존재하는 일반적인 경우에는 편차 벡터의 크기는 1.5 mm, 테이블 회전 방향으로 평균 $0^{\circ}$의 오차 내에서, 모의치료 시 팬톰의 위치와 맞출 수 있었다. 결론: 온보드 영상장치와 콘빔CT를 이용한 영상유도방사선치료(on-line IGRT)에서 모의치료 시 팬톰의 위치는 가속기의 치료테이블 위에서 매우 정확히 재현되어졌다. 온보드 영상장치는 kV X선 영상을 이용하여 간단하게 위치의 검증과 보정을 할 수 있었고, 콘빔CT를 이용하는 경우에는 2차원적인 정면 또는 측면 영상이 아니라, 3차원 영상을 비교함으로서 더욱 정확한 위치보정이 가능하였다.

도로면 포트홀 유지보수 자동화 장비의 개념디자인 및 경제적 타당성 분석에 관한 연구 (A Conceptual Design and Feasibility Analyses of an Automated Pothole Patching Machine)

  • 염동준;유현석;김영석
    • 대한건축학회논문집:구조계
    • /
    • 제34권4호
    • /
    • pp.65-74
    • /
    • 2018
  • The primary objective of this study is to develop a conceptual design of automated pothole patching machine that improves the conventional work in safety, quality, and productivity. For this, the following research works are conducted sequentially; 1)literature review, 2)selection of element technology for conceptual design, 3)deduction of work process and conceptual design, 4)life cycle cost analysis of the conceptual design. As a result, X-Y table telescopic manipulator, pothole patching end effector, realtime pothole recognizer, 3D pothole volume profiler, automated pothole patching machine controller are selected as core technologies. Furthermore, a conceptual design and working process of an automated pothole patching machine are developed based on the core technologies. According to the life cycle cost analysis result, the cost of the automated method was 38.3% less than that of the conventional method, and the economic efficiency was also superior(ROR 77.1%, Break-even Point 23.8month). It is expected that the application range and impact on the construction industry will be enormous due to the increasing trend of road maintenance market.

국산 유용 수종재의 인공건조 특성에 관한 연구 (Studies on the Kiln Drying Characteristics of Several Commercial Woods of Korea)

  • 정병재
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권2호
    • /
    • pp.8-12
    • /
    • 1974
  • 한국의 목재 인공 건조법을 개발하기 위하여 필자의 전직 대학인 전북대학교 전 김두헌 총장님, 동농대전 백남혁학장 및 동농대교수 제위의 각별한 협조를 얻어 1956년 고액을 지불하고 미국 More Dry Kiln Co.에서 최신의 목재 인공 건조 장치를 도입하여 전북 농대 임학과에 설치하게된 것이다. 그러나 이 건조 시설을 활용하는데는 많은 지장이 있었으므로 1959년 전기 More Dry Kiln의 온, 습도 조절장치만을 이용한 소형 Dry kiln을 제작하여 본 시험을 실시한 것이다. 공시수종은 소나무, 낙엽송, 은행나무, 전나무, 밤나무 및 감나무등이며, 공시목의 크기는 것이 60cm, 넓이 10cm 및 두께 15-35mm이다. 실험한 건조 조건은 건조 온도를 일정히 ($170^{\circ}F$)하고, 관계습도를 각종으로 변화할때 얻어지는 건조 속도를 측정하는 동시에 각 건조조건에 의하여 유발되는 건조결함을 조사하여 공시목의 초기 함수율과 건조 최경함수율 특히 shell의 함수율과의 비가 이들의 결함 형성 특히 표면경화(casehardening) 형성에 미치는 영향을 구명하였으며 또한 casehardening 계산식을 유도하였다. 1. 목재내부에 형성된 응력 즉 prong이 개주할 때의 응력은 prong이 서로 접합할 때의 응력을 100으로 하는 백분율에 의하여 다음식으로 표시할 수 있다. 단, 응력 측정에 사용한 prong은 그림 1과 같이 작성하여야 한다. $CH=\frac{(A-B') (4W+A) (4W-A)}{2A[(2W+(A-B')][2W-(A-B')]}{\times}100%$ 상식은 다음과 같은 간이식을 사용할 수 있다. $CH=\frac{A-B'}{A}{\times}200%$ 2. 일정 한 건조 조건하에 건조하여 항중에 달하고, 또한 normal casehardening을 형성하는 경우에 는, 그 sample board의 shell 의 함수율은 특히 얇은 sample board에 있어서 US Dep. Agr., Forest Products Laboratory에서 발표한 EMC 보다 낮다. 3. 본 실험에서 측정한 1시간당 목재 건조 표면적 $1cm^2$ 당 증발하는 증발량 즉 건조속도를 비교 검토한 결과 다음과 같은 순위로 되었으며, 비교 검토한 5수 종중 최대치를 유하는 은행나무 MC 20% 에 있어서 최저치를 표시한 밤나무의 3.8배가 된다. (표 1 참조) (1) 은행나무 (2) 감나무 (3) 소나무 (4) 낙엽송 (5) 밤나무 특히 함수율 26% 이하에 있어서 각 함수율에 대한 증발속도치는 다음과 같은 일차식으로 표시 할 수 있으며, 그 회귀계수 유의성 검정에 있어서의 T치는 다음과 같이 각각 고율의 유의성을 표시하였다. (표2 참조) 상기중 Y는 증발속도($g/cm^2hr$.), X는 함수율을 각각표시한다. 이들 회귀직선을 도시하면 그림 2와 같다. 4. 초기함수율과 건조 최종기에 있어서의 목재의 표층 함수율 즉 shell의 함수율과의 비(SR)가 casehar dening 형성에 미치는 영향은 다음과 같다. 어떤 SR 값에 관하여 그 SR 값 이하를 유하는 총개제수(N) 중 CH 제4급이 출현하는 수(D)의 확율 즉 N에 대한 D의 출현확율 P%는 표 3과 같다. (D의 출현확율 P%를 위험확율이라고 가칭한다.) 표 4에 있어서 종란의 1,2,3의 숫자는 각각 다음과 같은 사항을 표시한다. (1) CH 값 제 4급이 출현하지 아니 하는 안전한 최소 SF 값 (2) 위험을 30%를 허용하는 경우에 있어서의 SF 값의 한계 (3) CH 값 제 4급 이하가 발생하지 아니하는 위험율 100%의 값의 범위 상기한 실측 결과에 의하여 밤나무, 낙엽송등은 내부응력 형성이 용이한데 비하여 감나무, 소나무등은 내부응력 형성이 용이하지 아니하여, 특히 전나무, 은행나무등은 타수종과 동일한 건조조건에 있어서 reverse casehardening을 초래함에 비추워 타수종에 비하여 현저히 내부응력 특히 normal casehardening이 잘 형성되지 아니한다는 것을 알 수 있다. 5. casehardening을 제외한 각종의 drying defects는 long time loading에 있어서 그 내부응력이 ultimate stress를 초과할 때 나타나는 것인데 건조조건 온도 $170^{\circ}F$에 대하여 습도를 낮게하여도 그렇게 심하지 아니하나, 온도 $200^{\circ}CF$의 저습에 있어서 end coating을 하지 아니하는 경우에는 용이하게 발생한다. 특히 밤나무는 실험한 타수종에 비하여 casehardening 및 활열성 defects가 강한 것을 지적할 수 있다.

  • PDF