고력볼트의 현장 조립시 볼트 구멍 간의 불일치로 인하여 볼트 구멍을 확장하는 경우가 빈번하게 발생하고 있으며, 이를 위해서 외국 기준에서는 볼트 구멍 크기, 형태, 하중 방향에 따라 미끄럼하중에 대한 규정을 따로 두고 있다. 그러나 우리나라의 경우 과대구멍에 대한 시방규정이나 이에 대한 접합부 특성에 관한 연구는 미흡한 실정이다. 따라서, 접합부재 표면처리와 볼트구멍 크기의 변화가 접합부 내력에 어떠한 영향을 미치는 지를 실험을 통해 정량적으로 평가할 필요가 있다. 본 연구에서는 볼트 구멍 크기 및 형태에 따른 접합부의 미끄럼하중의 변화와 체결 후, 장기축력이완의 경향을 분석하기 위하여 160시간 및 800시간 동안 고력볼트의 축력의 변화를 측정하였다. 본 실험대상 고력볼트로 KS B 2819에 규정된 TS(Torque Shear)형 고력볼트를 사용하였다. 표준 볼트구멍 대비 그 외 볼트구멍의 미끄럼하중의 변화는 10% 미만으로 나타났으며, 장기축력이완은 직경 2.5배의 슬롯구멍에서, 2.66%로 가장 높게 나타났다.
We suggest how to program off-line robot path along shoes' outsole shape in the footwear buffing process by a 5-axis microscribe system like robot arms. This microscribe system developed consists a 5-axis robot link with a turn table, signal processing circuit, PC and an application software program. It makes a robot path on the shoe's upper through the movement of a microscribe with many joints. To do this, first it reads 5-encoder's pulse values while a robot arm points a shoes' outsole shape from the initial status. This system developed calculates the encoder pulse values for the robot arm's rotation and transmits the angle pulse values to the PC through a circuit. Then, Denavit-Hartenberg's(D-H) direct kinematics is used to make the global coordinate from robot joint one. The determinant is obtained with kinematics equation and D-H variable representation. To drive the kinematics equation, we have to set up the standard coordinates first. The many links and the more complicated structure cause the difficult kinematics problem to solve in the geometrical way. Thus, we can solve the robot's kinematics problems efficiently and systematically by Denavit-Hartenberg's representation. Finally, with the coordinate values calculated above, it can draw a buffing gauge-line on the upper. Also, it can program off-line robot path on the shoes' upper. We are subjected to obtaining shoes' outline points, which are 2 outlines coupled with the points and the normal vector based on the points. These data is supposed to be transformed into .dxf file to be used for data of automatic buffing robot. This system developed is simulated by using spline curves coupled with each point from dxf file in Autocad. As a result of applying this system to the buffing robot in the flexible footwear manufacturing system, it can be used effectively to program the path of a real buffing robot.
목구조물 접합부에 기존의 슬릿(slit)형 강판을 대체하기 위해서 FRP (Fiber Reinforced Plastic) 보강적층판을 제작하였다. 보강재, 접착제 종류에 따라 총 4가지 타입의 FRP 보강적층판을 제작하였으며, 접합부 적용 전 KSF 3021과 KSF 2160에 의거한 박리실험과 ASTM D5045-99에서 제안한 Compact Tension (CT)형 파괴인성 시험을 실시하였다. 접착성능 시험결과 GFRP textile, GFRP sheet, GFRP Textile-Sheet 타입의 FRP 보강적층판은 침지 및 내수침지박리 시험에서 모두 KS 기준인 박리율 5% 이하를 만족하였다. 그러나 Aramid 타입의 시험편은 침지박리율 4.8%로 기준을 만족하였으나 내수침지박리율 70%로 합격기준을 만족하지 못하였다. 파괴인성 시험결과 단판만을 교차적층 시킨 대조군시험편보다 목재 대비 보강재 체적비를 23%로 함으로서 FRP 보강적층판의 내력이 2~4배 증가하였다. 그중에서도 GFRP Textile-Sheet 타입의 시험편이 하중 평행방향의 유리섬유 배열로 인해 할렬파단을 억제하면서 대조군 대비 응력확대계수 비가 61% 증가되어 파괴를 가장 크게 억제하는 것으로 확인되었다. FRP 보강적층판과 비금속 dowels을 사용한 접합부의 인장형 전단내력은 금속접합에 비해 약 12% 낮은 내력이 측정되었다.
Purpose: This study is to identify the effect of Ankle Joint Taping applied to patients with chronic hemiplegia on their gait velocity and joint angles. Methods: We randomly extracted a clinical sample from 30 patients with hemiplegia resulting from stroke and classified them into two groups of a control group including 15 patients offered a regular therapeutic exercise and a test group including 15 patients offered taping. We also conducted the comparative analysis and pretest of the affected ankle joint angles by the normal characteristics of all subjects, Time to up and go test (TUG), 3D movement analyzer before the intervention. We applied taping to a test group for eight hours a day, five days a week during two weeks and conducted the comparative analysis of the gait velocity and the affected ankle joint angles by a comparison between and within two groups of before and after the intervention by conducting a posttest after the intervention. The result is as followings. Results: It indicated that there was a significantly decreased time with the increased gait velocity that a test according to a result of comparing the gait velocity within two groups (p<0.05). It indicated that there was a significantly increased angle in a comparison within two groups of test that inversion angle of a control group according to a result of comparing the ankle joint angles by 3D movement analyzer within groups (p<0.05). Conclusion: We found that TUG will help patients walk independently because it met a test group's need in the change of the gait velocity between two groups by recording less than 14 seconds which is the standard of using assistive aids and also found that ankle joint taping will help the joints prevent their function change considering that a control group showed an increased inversion angle in the change of the ankle joint within two groups.
이 연구는 시각장애 아동과 비 장애 아동의 보행형태를 비교 분석하여 하지분절의 생체역학적 변화와 패턴 및 이에 대한 시각장애 아동과 비 장애 아동의 차이를 구명하는데 그 목적이 있다. 이를 위해 하지에 최근 6개월간 병적 결함이 없는 시각장애 아동 4명과 비 장애 아동 2명을 선정하였다. 두 그룹의 보행 특성에 관한 자료 수집을 위해 적외선 카메라 6대와 지면반력기 1대를 사용하였다. 또한 기초자료 수집은 QTM프로그램을 이용하였고, Visual3D 프로그램을 이용하여 운동역학적 변인을 계산하였으며 다음과 같은 결론을 얻었다. 지지국면의 전 후 최대 지면반력은 제어기와 추진기 모두 시각장애 아동이 비 장애 아동에 비하여 지면반력이 작게 나타났으며, 제어기의 비율이 추진기에 비하여 긴것으로 나타났다. 하지관절 모멘트의 경우 발목에서는 일반적인 보행에 비하여 신전모멘트가 매우 작게 나타났으며, 무릎관절의 경우 지지국면동안 변화가 거의 없는 것으로 나타나 일반적인 보행 패턴과 상이한 결과로 나타났다. 그러나 엉덩관절 모멘트는 다른 관절에 비하여 상대적으로 크게 나타났다. 하지분절의 에너지 변화는 발과 정강이의 경우 비 장애 아동과 유사한 형태를 보였으나 에너지 발현이 매우 작은 것으로 나타났으며, 대퇴의 발현 형태는 다소 다르지만 다른 분절에 비하여 가장 에너지가 많이 발생하는 것으로 나타났다.
대규모 암반비탈면은 소규모 암반비탈면과 달리 파괴블록의 크기를 사면전체로 가정했을 경우 비합리적인 안정성 평가가 이루어질 가능성이 매우 크다. 즉, 파괴블록의 크기에 따라서 안전율, 절리면 강도정수 등이 변하기 때문에 대규모 비탈면의 경우에는 공학적인 방법으로 파괴 가능 블록크기 평가가 필요하다. 따라서 본 연구에서는 연구대상 부지의 절리조사자료를 이용하여 절리의 방향성(joint orientation) 및 절리간격(joint spacing) 통계분석, 3차원 절리발생 강도(joint intensity)분석 등의 과정을 거쳐 3차원 절리계를 생성한 후, 이를 이용하여 파괴가능 블록(failure block) 크기를 분석하였다. 분석결과 파괴유발이 우려되는 블록은 33개가 관찰되었으며, 최소크기 1.4m, 최대크기 38.7m, 평균크기 15.2m로 나타났다. 또한, 3차원 절리계 생성과정에서 발생되는 절리자료를 활용하여 확률론적해석, 2, 3차원 불연속체해석 등에 직접적으로 활용할 수 있었다.
To know the proper setup posture for the various clubs, changes of setup variables according to the change of golf club length was investigated. Swing motions of three male low handicappers including a professional were taken using two high-speed videocameras. Four clubs iron 7, iron 5, iron 3 and driver (wood 1) were selected for this experiment. Three dimensional motion analysis techniques were used to get the kinematical variables. Mathcad and Kwon3D motion analysis program were used to analyze the position, distance and angle data in three dimensions. The variables divided into three categories 1) position and width of anterior-posterior direction 2) position and width of lateral direction 3) angles and evaluated based on the theories of many good golf teachers. Major findings of this study were as follows. 1.The stance (distance between ankle joints) was increased as the length of the club increased but the increasing width was not large. It ranges from 5cm to 10cm and professional player showed small changes. 2. Forward lean angle of trunk was decreased (more erected) as the length of the club increased. It ranges from 30 degrees for iron7 to 25 degrees for driver. 3. Angle between horizontal and right shoulder were increased as the length of the club increased. It ranges from 10 degrees to 20 degrees and professional player showed small changes. 4. Anterior-posterior position of the shoulders were located in front of the foot for all clubs and the difference between the shoulder and knee position was decreased as the length of the club increased. 5. Anterior-posterior position of grip (hand) was located almost beneath the shoulders (2.5cm front) for iron7, but it increased to 10cm for the driver. This grip adjustment makes the height of the posture increased only 5cm from iron7 to driver. 6. Lateral position of grip located at 5cm left for the face of iron7, but it located at the right side (behind) for the face of driver. 7. Lateral position of the ball located at the 40%(15cm) of stance from left ankle for iron7 and located at the 10% (5cm) of stance for driver. 8. Head always located at the right side of the stance and the midpoint of the eyes located at the 37% of stance from the right ankle for all clubs. This means that the axis of swing always maintained consistently for all clubs. 9. Left foot opened to the target for all subject and clubs. The maximum open angle was 25 degrees. Overall result shows that the changes of the setup variables vary only small ranges from iron7 to driver. Paradoxically it could be concluded that the failure of swing result from the excessive changes of setup not from the incorrect changes. These findings will be useful for evaluating the setup motion of golf swing and helpful to most golfers.
무전해 Ni(P)는 솔더링 특성과 부식저항성이 우수하고 표면 거칠기가 적으며 원하는 금속 상에 선택적으로 도금이 가능하여 전자패키지에서 반도체칩과 기판의 표면 금속층으로 촉 넓게 사용되고 있다. 그러나 솔더와의 반응 중 금속간 화합물의 spalling과 솔더 조인트에서의 취성파괴 문제가 성공적인 적용의 걸림돌이 되어 왔다. 본 연구에서는 각각 조성이 다른 세가지 Ni(P)막 (4.6,9, and $13 wt.\%$ P)을 사용하곡 솔더와의 반응시 무전해 Ni(P)막의 미세구조 및 상 변화와 금속간화합물의 spatting 거동을 면밀히 조사하였다. $Ni_3Sn_4$ 화합물 아래로 침투한 Sn과 P-rich layer ($Ni_3P$)와의 반응에 의해 $Ni_3SnP$ 층이 형성되며 $Ni_3SnP$ 층이 성장함에 따라 $Ni_3Sn_4$가 spalling됨이 관찰되었다. Spalling 후에는 Ni(P)막이 용융된 솔더와 직접 접촉하게 되어 Ni(P)막의 결정화가 가속화되고 $Ni_3P$상이 $Ni_2P$상으로 변태되었다. 또한 이러한 결정화 과정 중 Ni(P)막의 부피가 감소됨에 따라서 인장응력이 발생하여 막 내부에 크랙이 발생하였다.
섬유금속적층판과 같은 하이브리드 소재는 여러 방향의 하중에 의한 접착층의 파괴로 인해 층간분리가 발생할 수 있다. 모든 하중은 수직 방향의 응력과 면내 두 방향의 전단 응력으로 분해할 수 있으며, 이러한 하중은 접착층의 모드 I, II, III 파괴를 일으킨다. 따라서 하중에 의한 층간분리 현상을 예측하기 위해, 접착층의 모드별 임계 에너지 해방률을 도출하는 것이 중요하다. 본 연구에서는 접착층의 모드 I 임계 에너지 해방률을 측정하기 위해 double cantilever beam 시험을 수행하였으며, 모드 II 임계 에너지 해방률을 측정하기 위해 end-notched flexure 시험을 수행하였다. 또한, 실험으로부터 도출한 임계 에너지 해방률을 ABAQUS의 응집영역모델에 적용하여 유한요소해석을 수행하였으며, 실제 실험 결과와의 비교를 통해 층간분리 현상에 대한 수치해석 기법 적용의 유효성을 입증하였다.
Purpose: This research with one group pre-post design was carried out to test the practical feasibility to administrate the Music Movement program developed for the stroke patients. Subjects: 12 stroke survivors at "J" Public Health Center in Seoul. were participated in. The average age was 68 years old, the ratio of sex was almost 5.8:4.2, the duration of was almost over 1 year. Method: Music Movement program was conducted for 2 hours ${\times}$ 1day ${\times}$ 6 weeks. The contents of Music Movement program were consisted of the preparatory activities, main activities and the wrap up activities. The preparatory activities are ice braking, greeting, explanation of the aims of music movement program, and introduction of stroke disease and ROM exercise. The main activities are the body motions with singing and playing musical instruments. The wrap up activities are stretching and joints and discussion of home activities. Data Collection: The outcome variables are muscle strength, finger pinch power, ROMs, flexibility, depression, and life satisfaction. Depression was measured by CES-D(Kim, I. J., 1999), life satisfaction by ladder scale(McDowell & Newell, 1996), and ADL state(Holbrook & Skilbeck, 1983). Data Analysis: SPSS/PC 10.0 for Window was used. Wilcoxon Signed Ranks Test was used to analyze outcome measures. The level of statistical significance was set at p<.05. Results: This program was effective to decrease the depression level of subjects(p<.05). The muscle strength, hand grip power, ROMs, life satisfaction, and rehabilitation state of the subjects were slightly increased but no significant differences were found between the pre and post test. Additionally every patient replied that they were very satisfied and expressed their appreciation for this program very much. Of course they strongly want to continue to participate in and meet the peer group again. Conclusion: Considering these results, the practical feasibility of Music Movement program can be supported. Therefore, this Music Movement program can be examined with the quasi-experimental design with control group and ongoing reviews. After that, this program would be applied in public health centers, medical institutes, and welfare centers for the rehabilitation of stroke patients.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.