• 한국해양공학회지
• /
• 제38권2호
• /
• pp.74-85
• /
• 2024

Offshore wind turbines are supported by various foundations, each with its considerations in design and construction. Gravity, monopile, and suction bucket foundations encounter geotechnical issues, while jacket and tripod foundations face fatigue problems. Considering this, a gravity foundation based on a steel skirt was developed, and a monopile foundation was analyzed for Pile-Soil Interaction using the p-y curve and 3D finite element method (3D FEM). In addition, for suction bucket foundations, the effects of lateral and vertical loads were analyzed using 3D FEM and centrifuge tests. Fatigue analysis for jacket and tripod foundations was conducted using a hotspot stress approach. Some hybrid foundations and shape optimization techniques that change the shape to complement the problems of each foundation described above were assessed. Hybrid foundations could increase lateral resistance compared to existing foundations because of the combined appendages, and optimization techniques could reduce costs by maximizing the efficiency of the structure or by reducing costs and weight. This paper presents the characteristics and research directions of the foundation through various studies on the foundation. In addition, the optimal design method is presented by explaining the problems of the foundation and suggesting ways to supplement them.

• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.233-241
• /
• 2003

최근 들어 지오텍스타일 튜브공법은 과거의 임시공법의 한계를 극복하고 다양한 분야에서 주요적용공법으로 활용이 확대되고 있다. 본 연구에서는 수치해석기법을 활용하여 지오텍스타일 튜브의 시공과정에서의 거동에 대하여 연구를 수행하였으며, 수치해석결과를 기존 연구 발표된 현장 모형시험 결과와 비교 분석하였다. 수치해석은 평면변형해석과 3차원 유한요소해석 기법을 이용하여 채움 과정에서 발생하는 정수압에 따른 지오텍스타일 튜브의 형태변화와 실대형 현장실험 결과를 비교 분석하였다. 또한, 3차원 유한요소해석에서는 정수압과 지오텍스타일의 강성변화에 따른 매개변수 해석을 통하여 지오텍스타일 튜브공법의 3차원 유한요소해석 기법을 제시하였다. 평면변형 해석이론에 의한 수치해석은 지오텍스타일 튜브 전용해석 프로그램인 GeoCoPS(version 2.0)를 활용하였으며, 3차원 유한요소 해석은 범용 유한요소해석 프로그램 ABAQUS(version 5.88)를 이용하였다. 평면변형 해석과 3차원 유한요소해석 결과 모두 실대형 현장실험 결과와 근접한 거동을 나타내었으며 적용토사의 종류 및 해석상의 가정사항으로 약간의 차이점들은 발생하지만 평면변형해석 및 3차원 유한요소해석방법을 통하여 채움과정에서의 지오텍스타일 튜브의 거동을 예측할 수 있다.

• 한국진공학회지
• /
• 제17권6호
• /
• pp.487-494
• /
• 2008

준 2차원 수치적 모델을 사용하여 침-평판(point-plane)형의 전극 사이에 있는 중간 압력 질소의 방전에 대한 시뮬레이션을 수행하였다. 이 모델에서는 전자와 이온에 대한 연속방정식을 풀어 시. 공간적으로 변하는 전하분포를 계산하고, 공간 전하 분포의 변화에 따라 결정되는 전기장은 푸아송 방정식을 풀어 얻는다. 연속 방정식은 FCT (Flux-corrected transport) 알고리즘과 FEM (Finite Element Method) 방법을 적용하여 수치적으로 다루어 졌다. 50Torr 압력에서의 질소 방전에 대한 시뮬레이션 결과는 중간 압력 질소 방전의 물리적 특성에 관한 상세한 이해를 제공한다. 또 계산 결과와 실험 결과[1]와의 비교는 정성적으로 잘 일치하는 것을 보여 준다.

• 조명전기설비학회논문지
• /
• 제22권3호
• /
• pp.34-39
• /
• 2008

The purpose of this paper is characteristic analysis of multi-disk axial-gap pm motor for turbo compressor. The axial-gap permanent magnet motor has shown a growing interest in high-speed application for its high-efficiency, compact size and low vibration characteristics due to core-less structure. To achieve high-power, the axial-gap PM motor has multi-disk structure of stator and rotor disk. Because of its complicated magnetic flux path, it is not easy to calculate a dynamic characteristics using finite element analysis. In this paper, the simplified 2-D unfolded model to predict EMF characteristic is presented. To verify thesuggested 2-D unfolded model analysis of back-EMF characteristic was calculated and compared 3-D finite element. Finally the proposed method is verified by experimental results and shows good agreement with test results.

• 제어로봇시스템학회논문지
• /
• 제7권10호
• /
• pp.812-818
• /
• 2001

This paper proposes an optimum design method of structural and control systems, taking a 2-D truss structure as an example. The structure is supposed to be subjected to initial static loads and disturbances. For the structure, a FEM model is formed, and using modal transformation, the equation of motion is transformed into that of modal coordinates in order to reduce the D.O.F. of the FEM model. The structure is controlled by an output feedback $H^$\infty$$ controller to suppress the effect of the disturbances. The design variables of the simultaneous optimal design of control-structure systems are the cross sectional areas of truss members. The structural objective function is the structural weight. The control objective function is the $H^$\infty$$ norm, that is, the performance index of control. The second structural objective function is the energy of the response related to the initial state, which is derived from the time integration of the quadratic form of the state in the closed-loop system. In a numerical example, simulations have been carried out. Through the consideration of structural weight and $H^$\infty$$ norm, an advantage of the simultaneous optimum design of structural and control systems is shown. Moreover, while the optimized performance index of control is almost kept, we can acquire better design of structural strength.

• 한국자기학회지
• /
• 제21권5호
• /
• pp.167-173
• /
• 2011

함정에 의한 수중 정자기장 신호는 수중 방사소음 신호에 비해 상대적으로 거리에 따라 급격히 감소되는 특성을 가지지만 근거리에서 정확한 표적 탐지가 가능하므로 감응 기뢰 체계에서 기폭 신호를 제공하는 신호원으로 널리 사용되고 있다. 본 논문에서는 상용 전자기 해석 도구를 활용하여 함정 선체, 내부 구조물 및 주요 탑재장비들에 의한 수중 정자기장 신호 특성 예측 결과에 대해 상세히 기술하였으며, 추가로 대상 함정에 소자코일을 배치하여 소자 효과도 분석을 수행하였다.

• 열처리공학회지
• /
• 제36권2호
• /
• pp.77-85
• /
• 2023

In this study, the mechanical properties of the Al-Mg-X (X=Cr, Si) alloy, which clearly showed the influence of the specimen and grain size, were investigated by changing the specimen size extensively. In addition, the effect on the specimen size, grain size and aging condition on the mechanical properties of the grain refining alloy according to the addition of Cr was clarified, and the relationship between these factors was studied. As the specimen size decreased, the yield stress decreased and the fracture elongation increased. This change was evident in alloys with coarse grain sizes. Through FEM analysis, it was confirmed that the plastic deformation was localized in the parallel part of specimen S2. Therefore, when designing a tensile specimen of plate material, the W/L balance should be considered along with the radius of curvature of the shoulder. In the case of under-aged materials of alloys with coarse grain size, the fracture pattern changed from intergranular fracture to transgranular fracture as W/d decreased, and δ increased. This is due to the decrease in the binding force between grains due to the decrease in W. In the specimen with W/d > 40 or more, intergranular fracture occurred, and local elongation did not appear. Under-aged materials of alloys with fine grain size always had transgranular fracture over a wide range of W/d = 70~400. As W/d decreased, δ increased, but the change was not as large as that of alloys with coarse grain sizes. Compared to the under-aged material, the peak-aged material did not show significant dependence on the specimen size of σ_0.2 and δ.

• 한국구조물진단유지관리공학회 논문집
• /
• 제4권2호
• /
• pp.113-129
• /
• 2000

This study evaluates the behavior and strength of an anchorage zone of the prestressed concrete box girder bridge on the Kyungboo highway railroad using the 2D SUB-3D STM approach and a linear elastic finite element analysis. The 2D SUB-3D STM approach utilizes several two-dimensional sub strut-tie models that represent the compressive and tensile stress flows of each projected plane of the three-dimensional structural concrete in the selection of a three dimensional strut-tie model, evaluation of the effective strengths of the concrete struts, and verification of the geometric compatibility condition and bearing capacity of the critical nodal zones in the selected three-dimensional strut-tie model. The finite element analysis uses an 8-node brick element and the longitudinal prestressing force is considered as the equivalent nodal force. Analysis results show that the 2D SUB-3D STM approach and linear elastic finite element method can be effectively applied to the analysis and design of three-dimensional structural concrete including a prestressed concrete box girder anchorage zone.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권6호
• /
• pp.255-262
• /
• 2001

This paper deals with characteristic analysis method of the slotless type Permanent Magnet Linear Synchronous Motor(PMLSM) using the space harmonic method. Analysis models of the PM and the armature current are described by the magnetization configurations taking into account the 2D and 3D distribution. In 3D analysis, the thrust and normal force can be calculated more accurately, because it can consider the z component flux density which is impossible in 2D analysis. In order to verify the validity of the proposed method, the results of the analytic method are compared with not only the experimental ones but ones of Finite Element Method(FEM).

• 대한조선학회논문집
• /
• 제35권4호
• /
• pp.98-108
• /
• 1998

중앙 단면도 등의 선박의 초기 구조설계는 여러 가지 이유로 2차원으로 설계되어 다른 설계부서에 도면으로 전달되고 있다. 본 연구에서는 기능이 서로 다른 여러 가지 컴퓨터 시스템사이의 데이터 교환을 위한 예제로, AutoCAD로 작성된 2차원의 초기 구조 설계 데이터를 구조해석(FEM) 시스템이나 상세설계 시스템(AutoDef)등의 다른 시스템에서 사용할 수 있는 데이터를 생성해 보았다. 이를 위해 STEP 제품모델의 방법에 따라 데이터가 정의 되었으며 2D 형상이나 3D 와이어프레임, 솔리드 모델등 다양한 형상을 다룰 수 있는 복합다양체 모델링 형상 도구인 ACIS가 사용되었다.