• Korean Journal of Plant Resources
• /
• v.21 no.3
• /
• pp.216-221
• /
• 2008

The Purpose of this study was to offer the raw data for drawing up the conservation plan by analysing natural vegetation in Midongsan, Chungcheongbuk-do, Korea. The period of survey was from July to October, 2004 and the size of plot was 100$m^2$. In the results of analyzing the physical environments, the range of altitude was 303${\sim}$550m and soil pH was 5.4${\sim}$6.8. The angle of slope was 3${\sim}$57% and topographical factor was composed of ridgeline. In the results of analyzing a importance percentage, the dominant species in tree layer, Pinus rigida, P. densiflora, Quercus mongolica, Q. variabilis and Q. acutissima, P. rigida, Q. mongolica, Q. acutissima, Platycarya strobilacea and Q. variabilis in subtree layer, Rhododendron mucronulatum, Symplocos chinensis for pilosa, Lindera obtusiloba, L. erythrocarpa, Rhus trichocarpa and Weigela subsessilis in shrub layer. In the results of species diversity index, species diversity (H') was from 1.2401 to 2.5540, maximum species diversity (H'max), from 1.9459 to 2.8904, evenness (J'), from 0.5644 to 0.8836, dominance (D), from 0.1164 to 0.4356.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.24
• /
• pp.10879-10882
• /
• 2015

Objective: To investigate the effect of intraoperative glucose fluctuation and postoperative interlukin-6 (IL-6), tumor necrosis factor-${\alpha}$ (TNF-${\alpha}$), C-reactive protein (CRP) levels on the short-term prognosis of patients with intracranial supratentorial neoplasms. Materials and Methods: Eighty-six patients undergoing intracranial excision were selected in The Second Hospital of Jilin University. According to the condition of glucose fluctuation, the patients were divided into group A (glucose fluctuation <2.2 mmol/L, n=57) and group B (glucose fluctuation ${\geq}2.2mmol/L$, n=29). Glucose was assessed by drawing 2 mL blood from internal jugular vein in two groups in the following time points, namely fasting blood glucose 1 d before operation ($T_0$), 5 min after anesthesia induction ($T_1$), intraoperative peak glucose ($T_2$), intraoperative lowest glucose ($T_3$), 5 min after closing the skull ($T_4$), immediately after returning to intensive care unit (ICU) ($T_5$) and 2 h after returning to ICU ($T_6$). 1 d before operation and 1, 3 and 6 d after operation, serum IL-6 and TNF-${\alpha}$ levels were detected with enzyme-linked immunosorbent assay (ELISA), and CRP level with immunoturbidimetry. Additionally, postoperative adverse reactions were monitored. Results: There was no statistical significance between two groups regarding the operation time, anesthesia time, amount of intraoperative bleeding and blood transfusion (P>0.05). The glucose levels in both groups at $T_1{\sim}T_6$ went up conspicuously compared with that at $T_0$ (P<0.01), and those in group B at $T_2$, $T_4$, $T_5$ and $T_6$ were significantly higher than in group A (P<0.01). Serum IL-6, TNF-${\alpha}$ and CRP levels in both groups 1, 3 and 6 d after operation increased markedly compared with 1 d before operation (P<0.01), but the increased range in group A was notably lower than in group B (P<0.05 or P<0.01). Postoperative incidences of hypoglycemia, hyperglycemia and myocardial ischemia in group A were significantly lower than in group B (P<0.05), and respiratory support time obviously shorter than in group B (P<0.01). Conclusions: The glucose fluctuation of patients undergoing intracranial excision is related to postoperative IL-6, TNF-${\alpha}$ and CRP levels and those with small range of glucose fluctuation have better prognosis.

• Geophysics and Geophysical Exploration
• /
• v.7 no.4
• /
• pp.245-250
• /
• 2004

Horizontal-axes on the seismic section have been represented in a distance unit by applying horizontal-distance correction transformation on a 2-D seismic section of single channel marine seismic data. By drawing horizontal-axes in a distance unit, distortion of horizontal distances shown on the seismic section when the ship speed varies during a survey can be diminished considerably. Position information obtained by GPS and stored in each trace of seismic data as well as data collection windows were used for horizontal distance correction. The minimum window length was decided by considering ship speed and shot interval, and the maximum window length wat determined by reflecting radius of the 1st Fresnel zone. In choosing an optimum window length, horizontal resolution and stacking effect were considered simultaneously. By applying horizontal distance correction we could get a 2-D seismic section which is considered at reflecting the real subsurface structure analogously.

• Journal of the Korean Society of Radiology
• /
• v.18 no.2
• /
• pp.127-133
• /
• 2024

The elbow joint is made up of three different bones. X-rays or other radiological exams are commonly used to diagnose elbow injuries or disorders caused by physical activity and external forces. Previous research on the elbow joint reported a new examination method that meets the imaging evaluation criteria in the tilt position by Z-axis elevation of the forearm. Therefore, this study aims to design an optimized instrument and develop an aid applicable to other upper extremity exams. After completing the 2D drawing and 3D modeling design, the final design divided into four parts was fabricated with a 3D printer using ABS plastic and assembled. The developed examination aid consists of a four-stage Z-axis elevation tilt angle function (0°, 5°, 10°, and 15°) and can rotate and fixate 360° in 1-degree increments. It was designed to withstand a maximum equivalent stress of 56.107 Pa and a displacement of 1.6548e-5 mm through structural analysis to address loading issues caused by cumulative frequency of use and physical utilization. In addition to X-ray exams of the elbow joint, the developed aid can be used for shoulder function tests by rotating the humerus and also be applied to MRI and CT exams as it is made of non-metallic materials. It will contribute to the accuracy and efficiency of medical imaging diagnosis through clinical applications of various devices and medical imaging exams in the future.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.3-11
• /
• 2014

Recently, rapid urbanization has necessitated continuous updates in digital map to provide the latest and accurate information for users. However, conventional aerial photogrammetry has some restrictions on periodic updates of small areas due to high cost, and as-built drawing also brings some problems with maintaining quality. Alternatively, this paper proposes a scheme for efficient and accurate update of digital map using point cloud data acquired by Terrestrial Laser Scanner (TLS). Initially, from the whole point cloud data, the building sides are extracted and projected onto a 2D image to trace out the 2D building footprints. In order to register the footprint extractions on the digital map, 2D Affine model is used. For Affine parameter estimation, the centroids of each footprint groups are randomly chosen and matched by means of a modified RANSAC algorithm. Based on proposed algorithm, the experimental results showed that it is possible to renew digital map using building footprint extracted from TLS data.

• Textile Coloration and Finishing
• /
• v.12 no.2
• /
• pp.103-110
• /
• 2000

To examine the physical properties of POY through the microstructure control, the crystal structure such as the crystallinity, the crystallite size, the orientation, the shrinkage, the tensile properties, and the thermal stress of POY(80/48, SD) were examined at different draw ratios and annealing temperatures. From the examination following conclusions were obtained : 1. The crystallinity was more effected by the heat setting temperature than by the draw ratio. The increasing rate was greatest at the heat setting temperature range of $170~190^\circ{C}$. 2. The crystallite size perpendicular to the fiber axis was more effected by the annealing temperature at lower draw ratios. On the other hand, the crystal and amorphous orientations were more effected by the heat setting at higher draw ratios. 3. The boiling shrinkage did not change significantly, but the total shrinkage showed 13% at the draw ratio 1.9 and the heat setting temperature $170^\circ{C}$. 4. The maximum thermal stress increased with increasing the draw ratio and decreasing the heat setting temperature in the temperature range of $170~210^\circ{C}$. At the draw ratio 1.9 and the heat setting temperature $170^\circ{C}$, the maximum thermal stress found was 1.1gf/d. 5. In the heat setting temperature above $170^\circ{C}$ after the drawing, the crystallinity, the crystallite size, the orientation, and the strength increased with increasing temperature, but the shrinkage and the maximum thermal stress decreased with increasing temperature.

• Journal of KIBIM
• /
• v.10 no.2
• /
• pp.12-20
• /
• 2020

Recently, interest in BIM technology has been growing in the domestic construction market as the number of construction projects requiring the application of BIM technology has increased. The use of BIM allows the use of various visualization functions through 3D models as well as drawing interference review, quantity calculation and integrated management of information. In particular, estimates of construction costs based on BIM can increase work efficiency by reducing the burden of calculating construction costs and managing them. In order to increase the efficiency of BIM-based cost estimates, it is necessary to improve the correlation between the BoQ(Bill of Quantity) information and the BIM model. For this purpose, the ratio of the amount and item to the detailed construction of the current BoQ was analyzed, especially the problem of the calculation of construction cost in the window work in this study. In addition, we would like to suggest a method for systematically linking the BoQ information with the BIM model by improving the BoQ information structure of the window work. It is expected that this will increase the efficiency of the quantity calculation and analysis work of construction cost of window work. In addition, it is expected that this method will help to analyze and predict changes in construction cost of windows and doors by facility characteristics and type.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.33 no.2
• /
• pp.77-82
• /
• 2022

Hunminjeongeum was made by the Great King Sejong, and composed of 17 consonant and 11 vowel letters. All the 28 letters were made according to the shape of vocal organ or space at the point of articulation for each letters. This review article focused on phonetic and phoniatric consideration for explanation of the designs of the middle vowel letters, especially three main vowel letters [ • (天, heaven), ㅡ (地, earth), ㅣ (人, human)] using video-fluoroscopic evaluation as well as computed tomography scanning, etc. During articulating / • / sound, a ball-like space at frontal portion of the oral cavity was found, tongue was contracted, and sound was deep (舌縮而聲深). During /ㅡ/ sound, a flat air space between oral tongue and hard palate was created. Tongue was slightly contacted neither deep nor shallow (舌小縮而聲不深不淺). During /ㅣ/ sound, tongue was not contacted and Sound is light (舌不縮而聲淺). Tongue was moved forward making longitudinal oro-pharyngeal air space. So, I'd like to suggest that we had better change the explanation drawing from a philosophical modeling to a more scientific modeling from real vocal tract space modeling during articulating middle vowels of Hunminjeongeum.

• Korean Journal of Biological Psychiatry
• /
• v.8 no.2
• /
• pp.258-265
• /
• 2001

Objectives : Chronic alcohol consumption has been known to result in various neurocognitive deficits. Many neuropsychological studies revealed that the major disturbances occurred in the executive function, learning and short-term memory, visuospatial performance function, perceptuo-motor skills, and abstraction and problem solving abilities. This study was done to identify which cognitive areas might be mainly affected. Methods : The cognitive disturbance was evaluated using the Korean Version of the Mini Mental State Examination(MMSEK) and the 7 Minute Screen(7MS) in male inpatients with alcohol dependence(N=3 : as well as in age and education level matched healthy male controls(N=30). Four individual tests of the 7MS were consisted of the Benton Temporal Orientation Test, the Enhanced Cued Recall, the Clock Drawing and the Category Fluency. Results : 1) The average scores of four individual test of the 7MS for the alcoholics were $2.77{\pm}4.38$ for the Benton Temporal Orientation Test, $13.90{\pm}2.02$ for the Memory Test(the Cued Recall $6.77{\pm}1.94$, the Uncued Recall $7.10{\pm}2.45$), $5.84{\pm}1.86$ for the Clock Drawing, and $12.58{\pm}3.29$ for the Category Fluency. Except the Benton Temporal Orientation Test, there were statistically significant differences between test scores of alcoholics and those of controls(p<0.01). 2) The alcoholics who had MMSE-K score <24 were 9.68%. The average(${\pm}S.D.$) score of the MMSE-K for the patient group($27.23{\pm}2.62$) was significantly(p<0.001) lower than that of the healthy controls($29.20{\pm}1.24$). There were no statistically significant differences between four individual test scores of the 7MS of alcoholics with the MMSE-K score <24(N=3) and those of alcoholics with the MMSE-K score ${\geq}24$(N=28). 3) Four individual test scores of the 7MS seemed to have statistically significant association with such variables as MMSE-K, duration of alcohol drinking, blood magnesium concentration, liver function and thyroid function. Conclusion : Mild deficits of cognitive areas such as orientation, memory, visuospatial abilities and verbal fluency could be found in alcohol dependence.

• The Journal of the Korea Contents Association
• /
• v.2 no.3
• /
• pp.1-15
• /
• 2002

A noel automated brain region extraction method in single channel MR images for visualization and analysis of a human brain is presented. The method generates a volume of brain masks by automatic thresholding using a dual curve fitting technique and by 3D morphological operations. The dual curve fitting can reduce an error in clue fitting to the histogram of MR images. The 3D morphological operations, including erosion, labeling of connected-components, max-feature operation, and dilation, are applied to the cubic volume of masks reconstructed from the thresholded Drain masks. This method can automatically extract a brain region in any displayed type of sequences, including extreme slices, of SPGR, T1-, T2-, and PD-weighted MR image data sets which are not required to contain the entire brain. In the experiments, the algorithm was applied to 20 sets of MR images and showed over 0.97 of similarity index in comparison with manual drawing.