• Journal of the Korea Convergence Society
• /
• v.9 no.2
• /
• pp.217-227
• /
• 2018

The objective of this study is to analyze the effects of music lesson applying the blended learning-based STEAM education on the musical knowledge and STEAM literacy of pre-service kindergarten teachers. After conducting a pre-test on the musical knowledge and STEAM literacy targeting 20 students(3rd year) of early childhood music lesson in Dept. of Early Childhood Education of C University in O Metropolitan City and 19 students(3rd year) of early childhood music lesson in Dept. of Early Childhood Education of D University in B Metropolitan City, the effectiveness of the pre - post test design was verified. In the results of study, the experimental group with music lesson applying the blended learning-based STEAM education showed significantly improved results in all the areas of musical knowledge and convergence, creativity, and communication out of STEAM literacy than the control group with general music lesson. Such results of this study imply that music lesson applying the blended learning-based STEAM education could be usefully used as a teaching/learning method to improve musical knowledge and STEAM literacy of pre-service kindergarten teachers in university education site in the future.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.11
• /
• pp.1139-1145
• /
• 2011

An automated anastomotic ring-pin system consisting of both the anastomotic ring-pin system and the coupler device has eliminated the drawbacks of the suture method. High density polyethylene (HDPE), a material with outstanding biocompatibility and injection molding capability, was used in the ring. SUS316 stainless steel, Ti-6Al-4Nb, Ti-6Al-4V, and unalloyed titanium were used in FEM simulations of the micropin. The authors categorized the microvascular anastomotic ring micropins into short neck (SN) and long neck (LN) groups in order to evaluate the effect of the micropin's fillet radius and neck length on the von Mises stress. The micropins were further divided into those with and without fillet. On the basis of the fillet radius rate (FRR), which represents the rate of change in the von Mises stress with respect to the availability and shape of the fillet, and the neck length rate (NLR), which represents the rate of change in the von Mises stress with respect to changes in the length of the neck within the fillet shape, it can be concluded that the SN-3 neck design is the most stable.

• Elastomers and Composites
• /
• v.42 no.1
• /
• pp.20-31
• /
• 2007

Material characteristics and lifetime evaluation are very important in design procedure to assure the safety and reliability of the rubber components. In this paper, the NBR compound was prepared by sulfur-cure system, and was used in predicting the lifetime of rubber gasket made by the compound. The accelerated material aging was investigated at different temperatures at 120, 140 and $160^{\circ}C$ and aging time from 3 hours to 600 hours at 5, 6, 7 vol %. of $H_2SO_4$ concentrations The rubber strips were placed in acid solution using pyrex g1ass tube. Both ends of pyrex g1ass tube were sealed to avoid evaporation of solution during heating at given time. The material test and accelerated acid-heat aging test were carried out to predict the useful life of NBR rubber gasket for a fuel cell stack. In order to investigate the effects of acid-heat aging on the properties of the NBR, tensile strength, elongation at break, hardness and crosslink-density were measured. The tensile strength decreases as the $H_2SO_4$ concentrations and temperature increase. Results were evaluated using Arrhenius equation.

• Science of Emotion and Sensibility
• /
• v.12 no.2
• /
• pp.169-180
• /
• 2009

The present study have investigated the effect of the characteristics of stereoscopic images and viewing environment on visual fatigue. We manipulated the speed of stereo images with motion-in-depth and viewing distance, which were used as representative variables of the characteristics of stereo image and viewing environment, respectively. Visual fatigue was evaluated with use of a subjective questionnaire which is consisting of 5 different and independent factors: "Eye pain", "Visual stress," "Nauseousness", "Body stiffness", and "Blurriness". In general, when viewing time increased from 10 minutes to 20 and 40 minutes, observers felt severe visual fatigue. Among other factors, only the factor score of "Nauseousness" was significantly increased as the speed of object moving in depth became faster. When viewing distance was increased, the score of "Blurriness" was decreased. These results suggest that different kind of the visual fatigue might be induced depending on characteristics of the stereo images and viewing environment.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.4
• /
• pp.273-282
• /
• 2002

We describe some performance of the detector electronics system for the FIMS (Far-ultraviolet Imaging Spectrograph) mission. The FIMS mission to map the far ultraviolet sky uses MCP (micro-channel plate) detectors with a crossed delay line anode to record photon arrival events. FIMS has two MCP detectors, each with a ~25mm$\times$25mm active area. The unconventional anode design allows for the use of a single set of position encoding electronics for both detector fields. The centroid position of the charge cloud, generated by the photon-stimulated MCP, is determined by measuring the arrival times at both ends of the anode following amplification and external delay. The temporal response of the detector electronics system determines the readout's positional resolution for the charge centroid. High temporal resolution (<$35{\times}75$ps FWHM) and low power consumption (< 6W) were achieved for the FIMS detector electronics system.

• Journal of the Korean Institute of Gas
• /
• v.19 no.2
• /
• pp.29-36
• /
• 2015

This study is an 1-D numerical study prior to modification of diesel engine for power plants to natural gas/diesel dual fuel engine using GT-Power with 1.5MW diesel engine for power generation. Natural gas injector was installed to intake manifold for dual fuel engine model. Effects on engine performance and characteristics were investigated when dual fuel is used in unmodified diesel engine. The analysis was done under 5 conditions from 0% to 40% of mixing rate on 720RPM engine speed. As a result of research, the engine performance was decreased as increasing ratio of natural gas. Engine brake power was decreased by 18.4% under 40% mixing rate condition. To clarify the reason, effects of injection timing and period were evaluated with DOE method. Considering this result, optimization was done for these parameters. Also, comparison between performances of dual fueled engine and diesel engine was made after optimizing the timing of injection by DOE method. As a result, engine brake power was decreased by 8.55% under mixing rate 40% condition showing 12.5% improvement.

• Korean Journal of Poultry Science
• /
• v.42 no.3
• /
• pp.205-214
• /
• 2015

This study aimed to investigate the effects of reducing feed intake on performance and meat quality in old laying hens. A total of 200 Hy-Line Brown laying hens (100 weeks old) were randomly allotted to five dietary treatments: control (100% daily feed intake), 90%, 60%, 50%, and 20% daily feed intake. Each treatment was replicated four times with 10 birds per replication and two birds per cage. Ten-bird units were arranged according to a randomized block design. The feeding trial lasted for 4 weeks under a 16L:8D lighting regimen. The results indicated that the daily feed intake correlated with hen-day egg production and feed conversion ratios (P<0.05). The carcass yields and partial ratios were also correlated with daily feed intake (P<0.05). The levels of leukocytes (without basophils) were higher in the 50% and 20% daily feed intake groups than in the other groups. The concentrations of dry matter, crude ash, crude fat, and crude protein, water holding capacity, cooking loss, and fatty acids in the breast meat did not decrease as the daily feed intake decreased. In conclusion, reducing daily feed intake decreased laying performance and carcass yield but had no effect on breast meat quality.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.4
• /
• pp.328-336
• /
• 2004

Recently a mobile service is changing into a system environment that offers the customer various contents service. Representative example of service is a Calling Identity Del ivory Service(CID). Such service has the problem in the case which the receiver cannot remember the phone number of the sender; it has a difficult problem that cannot easily confirm whose the phone number it is. Therefore, it is desirable to design and implement visual services that can enhance the recognition of users. In this paper, we propose the architecture that is similar to a Calling Identity Delivery Service. We propose the architecture for communication service and system that is able to visually display the information of the sender using 2D image data in mobile environment. After that we set the image information to represent the user and this method is able to visually display the information of the sender by transmitting an image data through channels from switch station or base station using the server. When the receiver receives a phone call from the sender, this method provides an efficient service by transmitting visual data with bell sound. That is, the image information of sender is appeared on liquid crystal display(LCD) of the receiver at the same time. We investigate the concepts for processing real-time transmission of image data and describe an example of the implementation result that is based on system. This technology has a potential influence on the marketing and presents an efficiency of this method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4022-4029
• /
• 2011

The study was done to identify the effects of Koryo Hand Therapy(KHT) of woman elders' knee pain. This is an quasi-experiment with nonequivalent control group pre- & post-test design. The subjects consisted of 105 woman elders were admitted to in elders' hospital in D city. They are randomized 35 for the experimental group A by using ceramic Seo Am pellet therapy, 35 for the experimental group B by using Seo Am moxa therapy and 35 for the control group. The Koryo Hand Therapy(KHT) was conducted 3 times per week for 6 weeks. Data analyzed using ${\chi}^2$-test, One-way ANOVA and repeated measure ANOVA with SPSS Win 17.0 version. The results of this study was knee pain of the experimental group A provided with ceramic Seo Am pellet therapy(p=.000), the experimental group B provided with Seo Am moxa therapy(p=.000) would be lower than that the control group. Knee pain of the experimental group B provided with Seo Am moxa therapy would be lower than that the experimental group A provided with ceramic Seo Am pellet therapy(p=.001). Koryo Hand Therapy(KHT) was to be effective in relieving knee pain woman elders' and it is suggested that the therapy should be used for managing.

• The Journal of Korean Institute of Information Technology
• /
• v.15 no.12
• /
• pp.181-188
• /
• 2017

As a population of leisure activities grows and diversifies, there is a great demand for portable and environment-friendly power generation systems. A small wind power generation system is emerging as a suitable power generation equipment to meet these needs. The most important thing when developing a small portable wind turbine is to reduce the weight of the generator and increase the efficiency. The existing 300W wind turbine generator weighs about 10kg, which is heavy to carry. Therefore, a new generator weighing less than 4kg to make it easy to carry with high efficiency has been developed. In addition, considering complicated characteristics of wind volume and topography of Korea, a small wind turbine that can be used in urban and rural areas individually was constructed. Through basic designing and optimization, the lightweight and efficient generator was manufactured. It is a 300W wind turbine designed and fabricated with reduced weight as a prototype. The average output voltage of the generator was 24.7V at 900rpm no-load test. On a load test with the average line voltage 36.8V and the average phase current 2.62A, when the mechanical input was 339.84W, an average voltage output of the generator was measured as 289.5W with efficiency of 85.18%. The generator weight was 3.84kg.