• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.81-86
• /
• 2024

Advancements in generative AI are reshaping graphic and 3D content design landscapes, where AI not only enriches graphic design but extends its reach to 3D content creation. Though 3D texture mapping through AI is advancing, AI-generated 3D modeling technology in this realm remains nascent. This paper presents AI 2D image-driven 3D modeling techniques, assessing their viability in 3D content design by scrutinizing various algorithms. Initially, four OBJ model-exporting AI algorithms are screened, and two are further evaluated. Results indicate that while AI-generated 3D models may not be directly usable, they effectively capture reference object structures, offering substantial time savings and enhanced design efficiency through manual refinements. This endeavor pioneers new avenues for 3D content creators, anticipating a dynamic fusion of AI and 3D design.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.2
• /
• pp.340-347
• /
• 2008

A prototype of 3D clothing design system with a direct pattern development function was suggested, reflecting intuitive design functions and design modifications while considering the fit of clothing patterns with the 3D human body in the virtual 3D space. The research method was as follows. Clothing models were created using a 3D design tool, 3ds max on the surface of 3D human body model made by scanning an actual human body. 3D illustrations were completed by revising the fit and sizing of the human body and clothing models. 2D T-shirt pattern was produced 3D illustrations using from a 3D scanning data modeling solution RapidForm 2004, a 2D conversion program for 3D data called 2C-AN, and Yuka CAD. As a result, the following conclusions were made. The fit of the clothing and human body can be adjusted by reflecting individual body figure characteristics and 3D illustrations over the actual 3D body model. Furthermore, intuitive design support functions were intensified overcoming the weak point of existing 3D clothing design system by developing the direct clothing design in the virtual 3D space. 3D illustration design modifications can be directly reflected on clothing patterns from 3D illustrations by 3D clothing design system developed in this study.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.19-29
• /
• 2022

The 2D/1D method has become the mainstream of the direct transport calculation considering the balance of accuracy and efficiency. However, the 2D/1D method still suffers from stability issues. Recently, a quasi-3D method has been proposed with axial Legendre expansion. Analysis and comparison of the 2D/1D and quasi-3D method is conducted in theory from the equation derivation. Besides, the C5G7 benchmark, the KUCA benchmark and the macro BEAVRS benchmark are calculated to verify the theory comparisons of these two methods with the direct transport code SHARK. All results show that the quasi-3D method has better stability and accuracy than the 2D/1D method with worse efficiency and memory cost. It provides a new option for direct transport calculation with the quasi-3D method.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.6
• /
• pp.393-402
• /
• 2006

The purpose of this study is to develop mechanisms of nD model-based design by the combination of 2D drawing standards and 3D building models from the current 2D and text-based design. The aim of this study can be archived by defining the 2D model extension definitions for the IFC model development and harmonizing existing 2D standards. The paper examines 1) 3D Representation of Building Element and Building Services element, and 2D Model extension of IFC2X.2, 2) Basic development of additional 2D element that should be added to IFC model, and 3) mapping method between current 2D standard and IFC2.X2. Following this approach, the interoperability problem between 3D model and 2D drawing can be solved and finally an extended data model could be developed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.11
• /
• pp.1536-1543
• /
• 2004

Garment is made by a 2D pattern and should be fitted to a human body which has 3D characteristics. Therefore, to design a pattern more effectively, the use of 3D information of a human body and the investigation of relationship between the 3D garment and 2D pattern are necessary. In this work, ruled surface method was used to reflect the 3D information of a human body for a pattern design. The images of the brassiere line on the woman's dress form were captured by phase-shifting projection moire system and the 3D information on the design line was obtained. 2D patterns on the various parts of the brassiere were developed directly from the 3D data by the ruled surface method. In addition, design line, the area and the amount of dart were quantified. And then we verify the appropriateness of the ruled surface method to the 2D pattern development by measuring the distribution of the space between women's figure and segmented clothing item. It was found that the ruled surface method is useful to transform the 3D design line to the 2D pattern, if we followed the steps suggested in this paper.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2005.05a
• /
• pp.240-241
• /
• 2005

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.6
• /
• pp.429-439
• /
• 2006

The purpose of this study is to support the integration from current 2D drawing-based design to future 3D model-based design. In this paper, an important theme is the combination between the STEP-based 2D drawing standards (i.e., AP202) and the IFC-based 3D building model standards. To achieve the purpose, two methodologies are proposed as follows: the development of IFC extension model for the 2D shape data representation by harmonizing ISO/STEP AP202; and the development of mapping solution between IFC 2D extension model and KOSDIC by constructing the exchange scenario for 2D shape data representation. It is expected that the proposed IFC2X2 2D extension model and mapping solution will offer the basis of development of the integrated standards model in AEC industry.

• Science of Emotion and Sensibility
• /
• v.14 no.1
• /
• pp.39-48
• /
• 2011

There still is a limitation in the usage of 3D clothes model in the production line due to the lack of compatibility between 3D modeling software, and its accurate 2D pattern making software, especially for free formed dress with tight fitted zone and draped part. In this study, obstacles in the 3D direct dress design process was overcome by solving the compatibility among each step of 3D virtual design process as well as adopting 3D-2D direct pattern development program called 2C-AN. Efficacy of making 2D pattern from 3D dress design using 2C-AN program developed by the authors was examined during the course of actual dress making process. Accurate ease over the fitted dress part was examined by 3D scanning technology, and the actual appearance of the draped part was compared with the simulation image of dress model. It was confirmed that the entire 3D design process and direct 2D pattern development proposed in this study was accurate enough to use in the 3D design process.

• Journal of KIBIM
• /
• v.5 no.2
• /
• pp.12-18
• /
• 2015

Bridge piers typically have circular or rectangular shapes without decorative design. Prefabrication for accelerated construction has been widely adopted in bridge structures. Cost for steel formwork is a main restriction of creative irregular shapes. 3D modelling techniques allow creative design of columns and 3D printing provides possibility to minimize the fabrication cost. In this paper, 3D design process of bridge piers was suggested by converting 2D picture into 3D decorative shape. Formwork design using 3D printed panels was also proposed and mock-up tests were conducted. Precast columns need accurate geometry control from fabrication to assembly. Laser scanning and geometry control devices were adopted. Through the digitalized process of design, fabrication and assembly, creative design of structures can be realized in reasonable cost range.

• The Journal of the Korea Contents Association
• /
• v.15 no.2
• /
• pp.177-186
• /
• 2015

This study aims to suggest the direction in which furniture design can contribute, keeping with the trend of small quantity batch production by analyzing cases of furniture design manufacturing. This study analyzed cases of furnitures and lights made by 3D printing with 3 classifications. They are 1st, classification by correlation between 3D printing method and materials, 2nd, classification by 8 formative characteristics of 3D printing furniture design, 3rd, comparison analysis of competitiveness between existing furniture design and 3D printing furniture design by practicality, usability and durability. The competitiveness 3D printing technique arouses in furniture design industry, which is investigated in this thesis, is as follows. 1st, small quantity batch production, which caters to personal taste, is made possible. 2nd, transmission and transportation via digital are became more convenient. 3rd, it brings about a breakthrough in furniture design manufacturing. 4th, there is room for development into the 'smart furniture design' industry through collaborative use of 3D printing and internet of things. 5th, an Eco-friendly method of furniture design is consistently facilitated.