• Journal of Sensor Science and Technology
• /
• v.24 no.3
• /
• pp.155-158
• /
• 2015

In this paper, in-situ heat cooling with temperature monitoring is reported to solve thermal issues in electric vehicle (EV) batteries. The device consists of a thick graphene cooler on top of the substrate and a platinum-based resistive temperature sensor with an embedded heater above the graphene. The graphene layer is synthesized by using chemical vapor deposition directly on the Ni layer above the Si substrate. The proposed thick graphene heat cooler does not use transfer technology, which involves many process steps and does not provide a high yield. This method also reduces the mechanical damage of the graphene and uses only one photomask. Using this structure, temperature detection and cooling are conducted simultaneously using one device. The temperature coefficient of resistance (TCR) of a $1{\times}1mm^2$ temperature sensor on 1-$\grave{i}m$-thick graphene is $1.573{\times}10^3ppm/^{\circ}C$. The heat source cools down $7.3^{\circ}C$ from $54.4^{\circ}C$ to $47.1^{\circ}C$.

• Child Health Nursing Research
• /
• v.24 no.3
• /
• pp.329-336
• /
• 2018

Purpose: This study analyzes the effects of smoking behaviors of women of reproductive ages in terms of maternal conditions and conditions arising during the perinatal period in Korea. Methods: We used the National Health Insurance Corporation's medical panel data. Subjects included 382 individuals suffering from maternal conditions and conditions arising during the perinatal period from 2013 to 2014. A t-test was used to analyze the individual differences between maternal conditions and conditions arising during the perinatal period-A hierarchical regression analysis was performed in two steps to measure the effects of smoking behaviors on diseases. Results: The amount and duration of smoking are significant factors causing maternal conditions and conditions arising during the perinatal period. In the regression analysis, the explanatory power of model was significantly increased by adding smoking behavior to the maternal conditions and conditions arising during the perinatal period. Smoking behavior during pregnancy displayed a significant influence on diseases. Conclusion: Results of this study showed that the effects of smoking behavior on maternal conditions and conditions arising during the perinatal period were significant. Therefore it is necessary to develop a smoking cessation education program for pregnant women in Korea.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.11
• /
• pp.1609-1612
• /
• 2003

The electrooxidation of 8-(3-acetylimino-6-methyl 2,4-dioxopyran)-1-aminonaphthaline (AMDAN) in aqueous and non aqueous media led to the formation of polymeric films, poly (AMDAN). The monomer, undergo anodic oxidation through the formation of a monocation radical irrespective of the nature of the medium. In aqueous medium, the monocation radical undergoes, through its resonance structures, dimerisation involving tail-to-tail, head-to-tail and even head-to-head coupling. The products formed, being more easily oxidisable than the parent substance, undergo further oxidation at the same potential so that the overall oxidation involves a one-step (i.e., a single wave), two-electron process. In non-aqueous medium, the monocation radical does not undergo dimerisation through coupling reactions. Retaining its identity, monomer oxidise in two steps involving one electron in each step. The fact that the cathodic peaks corresponding to these anodic peaks are rarely observed indicates fast consumption of the electrogenerated monocation radicals and dications by follow-up chemical reactions to produce polymeric products (poly AMDAN). The electrochemical behavior of the formed polymer films was investigated in both non aqueous and aqueous media. The films prepared in non aqueous medium were found to be more electroactive than that the films prepared in aqueous medium. This is confirmed with the results in litreature which illustrate that the film prepared in aqueous solution hold water in its structure via hydrogen bonding, which causes decomposition reactions.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.291-297
• /
• 2007

The hydrolysis reaction of sulfur mustard(HD, bis 2-chloroethylsulfide), one type of the blister agents was studied in water to find the operation conditions which can convert HD into less toxic compounds. The reaction was proceeded into two steps. First, 10~20 wt% of HD was hydrolyzed in water at $90^{\circ}C$ for 2 hr and aqueous sodium hydroxide solution(2.1 eq) was subsequently added to the reaction mixture at room temperature. The efficiency of HD hydrolysis at this experimental conditions was greater than 99.99% and the final degradation products of HD were 68 wt% of thiodiglycol, 8 wt% of 1,2-bis(2-hydroxyethylthio)ethane and 24 wt% of bis(2-hydroxyethylthioethyl)ether.

• Journal of Technologic Dentistry
• /
• v.35 no.4
• /
• pp.353-358
• /
• 2013

Purpose: This study was observation shear bonding strength by compositional change and firing step of a Ni-Cr alloy for porcelain fused metal crown. The aim of study was to suggest the material for firing step of Ni71-Cr14 alloy to development of alloy for porcelain fused to metal crown. Methods: The test was on the two kinds of Ni-Cr alloy specimens. The surfaces of two alloys were analyzed by EDX in order to observe oxide characteristic. And the shear test was performed by MTS. Results: The surface property and oxide characteristic analysis of oxide layer, weight percentage of Element O within $Ni_{71}Cr_{14}$ alloy measured 23.32wt%, and $Ni_{59}Cr_{24}$ alloy was measured 23.03wt%. And the maximum shear bonding strength was measured 58.02MPa between $Ni_{59}Cr_{24}$ alloy and vintage halo(H4 group). Conclusion: The surface property and oxide characteristic three kind of Ni-Cr alloy was similar. and shear bonding strength showed the highest bonding strength in H4 specimens.

• Women's Health Nursing
• /
• v.24 no.1
• /
• pp.1-13
• /
• 2018

Purpose: To develop educational material about nutrition during antepartum period for women pregnant with twins by using smartphone applications. Methods: A series of steps according to ADDIE model, including Analysis, Design, Development, Implementation, and Evaluation were used to develop smartphone application of antepartum nutrition care for women pregnant with twins. Results: Based on experts' evaluation, the average score was $4.6{\pm}0.39$ in total. Content score was $4.7{\pm}0.40$. Interface design score was $4.5{\pm}0.55$. Content score was higher than interface design score. User evaluation was conducted in the form of interview. Results of interviews revealed that users generally responded positively to the accuracy, understanding, and objectivity for content items of the smartphone app. As for the evaluation of consistency for the evaluation item of interface design, users answered "ordinary" or "generally yes". For design suitability and accuracy of vocabulary, they answered 'generally suitable'. Conclusion: The smartphone app developed through this study is expected to aid antepartum care for women pregnant with twins. It will also contribute to health promotion of both pregnant women and twin fetus.

• Korean Journal of Remote Sensing
• /
• v.24 no.6
• /
• pp.621-629
• /
• 2008

This study was carried out in part of Tamil Nadu, India. Also, Landsat ETM+ image and field sampling data were acquired. The field data were basal area, number of trees and number of species. Using the data set, this study performed a three steps processing, (1) Image classification (2) extracting the vegetation indices(NDVI, Tasseled cap brightness, greenness and wetness) (3) mapping the prediction of biodiversity distribution using basal area and NDVI image value. Basal area was significantly correlated with NDVI. The result of classification showed 69% overall accuracy.

• Computers and Concrete
• /
• v.24 no.4
• /
• pp.313-327
• /
• 2019

The purpose of the present study is to present a new approach to designing and selecting the details of multidimensional continuous RC beam by applying all strength, serviceability, ductility and other constraints based on ACI318-14 using Teaching Learning Based Optimization (TLBO) algorithm. The optimum reinforcement detailing of longitudinal bars is done in two steps. in the first stage, only the dimensions of the beam in each span are considered as the variables of the optimization algorithm. in the second stage, the optimal design of the longitudinal bars of the beam is made according to the first step inputs. In the optimum shear reinforcement, using gradient-based methods, the most optimal possible mode is selected based on the existing assumptions. The objective function in this study is a cost function that includes the cost of concrete, formwork and reinforcing steel bars. The steel used in the objective function is the sum of longitudinal and shear bars. The use of a catalog list consisting of all existing patterns of longitudinal bars based on the minimum rules of the regulation in the second stage, leads to a sharp reduction in the volume of calculations and the achievement of the best solution. Three example with varying degrees of complexity, have been selected in order to investigate the optimal design of the longitudinal and shear reinforcement of continuous beam.

• Journal of the Korea Society for Simulation
• /
• v.24 no.3
• /
• pp.55-60
• /
• 2015

This paper presents an SBA (simulation-based acquisition) effectiveness analysis environment using the RUP (Relational Unified Process) model. The RUP model has 4 phases which cover the whole development steps such as requirement analysis, design, development and test. By applying the RUP model, SW development can be represented with the iterations of developments for each phase. Such a characteristics of the model would make the model suitable for defense acquisition. In this paper, we show the relation between the RUP model and V process model, which is the foundation for defense acquisition. In order to show how the model could be applied to SBA effectiveness analysis, graphical user interfaces for the analysis are presented at the end of the paper.

• Journal of Korea Multimedia Society
• /
• v.24 no.4
• /
• pp.558-568
• /
• 2021

The digital image to be accepted as legal evidence, it is important to verify the authentication of the digital image. This study proposes a method of authenticating digital images through three steps of comparing the file structure of digital images taken with iPhone, analyzing the encoding information as well as media logs of the iPhone storing the digital images. For the experiment, digital image samples were acquired from nine iPhones through a camera application built into the iPhone. And the characteristics of file structure and media log were compared between digital images generated on the iPhone and digital images edited through a variety of image editing tools. As a result of examining those registered during the digital image creation process, it was confirmed that differences from the original characteristics occurred in file structure and media logs when manipulating digital images on the iPhone, and digital images take with the iPhone. In this way, it shows that it can prove its forensic authentication in iPhone.