• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05a
• /
• pp.42-45
• /
• 2003

The phase transformation of $REBa_2Cu_3O_{7-x}$ (RE=Nd, Gd, Dy) was investigated using isothermal heat-treatment and continuous cooling in air. During continuous cooling, the $REBa_2Cu_3O_{7-x}$ (RE=123) superconducting phase with well-distributed $REBa_2Cu_3O_{7-x}$ (RE-211) was obtainde at a cooling rate of $0.001^{\circ}C$/s. Single phase RE-123 (Nd, Gd, Dy) was stable at $1050^{\circ}C$, $1050^{\circ}C$, and $950^{\circ}C$ during isothermal heat-treatment, respectively. Above these temperatures the RE-211 phase existed within the RE-123 grains. The RE-123, RE-211, $BaCu_2Od_2$, and CuO phases coexisted at $50^{\circ}C$ below the partial melting temperature for each respective rare-earth RE-123.

• Advances in materials Research
• /
• v.12 no.3
• /
• pp.211-226
• /
• 2023

The present work is considered to study the two-dimensional problem in an orthotropic magneto-thermoelastic media and examined the effect of thermal phase-lags and GN-theories on Rayleigh waves in the light of fractional order theory with combined effect of rotation and hall current. The boundary conditions are used to derive the secular equations of Rayleigh waves. The wave properties such as phase velocity, attenuation coefficient are computed numerically. The numerical simulated results are presented graphically to show the effect of phase-lags and GN-theories on the Rayleigh wave phase velocity, attenuation coefficient, stress components and temperature change. Some particular cases are also discussed in the present investigation.

• Progress in Superconductivity and Cryogenics
• /
• v.1 no.1
• /
• pp.1-6
• /
• 1999

The microstructures of top seed mult processde $\textrm{YBa}_2\textrm{Cu}_3\textrm{O}_7$.$\delta$ single crystal were studied. Although shape of the seed was not faceted. the growth shape of Y123 single crystal was faceted. It was observed that Y211 phases were trapped in specific spaces of the faceted region. From the microstructural investigation. it was suggested that the segregation of Y211 is due to the difference of growth rates in crystal direction. When a single crystal was grown by the single seed with stepped multi surfaces. a microstrue was grown from multi-seed. The microstructure show the possibility of multi-seed growth. Corn kernel like structure without Y211 phase was observed and seemed to be formed by the diffusion reaction between Y211 phase in crystal and liquid wetted on the crystal. the diagonal line on Y123 crystal was observed that it was formed by the corn kernel like structure.

• Journal of Integrative Natural Science
• /
• v.6 no.4
• /
• pp.211-214
• /
• 2013

In this study, in order to investigate how consecutive treatments of glass surface with HF acid and water vapor/Ar plasma affect the quality of 3-aminopropyltriethoxysilane self-assembled monolayer (APS-SAM), poly(3,4-ethylenedioxythiophene) (PEDOT) thin films were vapor phase-polymerized immediately after spin coating of FeCl3 and poly-urethane diol-mixed oxidant solution on the monolayer surfaces prepared at various treatment conditions. For the film characterization, various poweful tools were used, e.g., FE-SEM, an optical microscope, four point probe, and a contact angle analyzer. The characterization revealed that HF treatment is not desirable for the synthesis of a high quality PEDOT thin film via vapor phase polymerization method. Rather, sole treatment with plasma noticeably improved the quality of APS-SAM on glass surface. As a result, a highly dense and smooth PEDOT thin film was grown on uniform oxidant film-coated APS monolayer surface.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12S
• /
• pp.1278-1285
• /
• 2003

This study investigated the phase transformation of the REBa$_2$Cu$_3$$O_{7-x}$ (RE=Nd, Gd, Dy) superconductor, and CCT (Continuous-Cooling-Transformation) along with the TTT (Time-Temperature-Transformation) diagrams are suggested according to the isothermal and continuous cooling heat-treatments. The peritectic temperature of the 123 phases decreased approximately 3$0^{\circ}C$ when the ionic radius of the rare-earth elements was reduced. The optimum cooling rate where BC and Cu-free phases do not exist was 0.001$^{\circ}C$/s. At this cooling late, the 123 phase grew with a c-axis Perpendicular to the surface and had a well-distributed 211 phase. When the oxygen partial pressure was reduced Outing isothermal heat-treatment, the formation temperature of the 211 phase decreased. In addition, the formation temperature of the 123 phases decreased from 100$0^{\circ}C$ (Nd-123) to 9$25^{\circ}C$ (Gd-123), and finally 875$^{\circ}C$ (Dy-123) according to the decrease in the ionic radius of the tare-earth elements. Compared to Nd-123, Gd- and Dy-123 had a better texture with a well-distributed 211 phase.e.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.211-213
• /
• 2009

Derivation of the phase error of hologram due to imperfection of a wave plate and analysis of the effect of phase error on 3-D image reconstruction of hologram are prexented.

• Applied Chemistry for Engineering
• /
• v.10 no.5
• /
• pp.772-777
• /
• 1999

$Y_2Ba_1Cu_1O_5(Y211)$ powders were prepared by pyrophoric synthesis method and by solid state reaction method using $Y_2O_3(99.9%)$, $BaCO_3(99.9%)$, and CuO(99.9%) powders in both of these processes. The phase formation and reaction kinetics of $Y_2Ba_1Cu_1O_5$ powders have been studied using X-ray diffraction analysis(XRD) of samples at various heat treatment temperatures and reaction time. The reaction characterization suggested that the phase formation rate is mainly controlled by the particle size of Y211 powders. The activation energy(${\Delta}E_a$) of Y211 phase formation in this pyrophoric synthesis method was found to be 136.42 kJ/mol compared with 149.46 kJ/mol for that of solid state reaction method. These results data showed that the pyrophoric synthesis method is kineticaly more efficient than the solid state reaction method in this $Y_2Ba_1Cu_1O_5$ system.

• Journal of the Korean Society for Heat Treatment
• /
• v.34 no.1
• /
• pp.1-9
• /
• 2021

The martensitic stainless steel has excellent corrosion resistance and higher strength by quenching and tempering heat treatment. It has been widely used as blade material due to these properties. The hardness and impact toughness of martensitic stainless steel depended strongly on tempering temperatures. The 12Cr martensite stainless steel (SS 410) tempered about 540℃ showed temper embrittlement. To know cause of temper embrittlement in terms of phase identification, a detailed analysis of electron diffraction patterns during TEM observations has been carried out on the <110>α-Fe and <113>α-Fe zone axes for temper embrittlement specimen. The double electron diffraction spots at 1/3(211) and 2/3(211) positions were observed. The lattice space between individual diffraction spots was about 3.5 Å and this value coincide with three times to α-bcc lattice space (1.17 Å). The area which found double diffraction spots was judged metastable "zone" similar to the omega phase and induced embrittlement of SS410 material.

• Journal of the Korean Institute of Gas
• /
• v.18 no.4
• /
• pp.86-94
• /
• 2014

To develop a Root Cause Analysis Map which determines the cause of the accident in chemical laboratory, The Root Cause Analysis(RCA) Map for the laboratory areas was sketched from Phase 1 of the accident element to Phase 3 of the accident element, based on the RCA Map which is applied in the petrochemical industry. On the basis of laboratory RCA Map which was classified by using such method. The root causes of the 211 accident cases in laboratories were classified from Phase 4 to Phase 5 by the Cause Factor Charting technique and The cause of the accident data were inputted to EXCEL program. After that, The causes of the accident data were sorted and classified by type and each step. So 'Approximate Primary RCA Map Draft' was written. In addition, it was reaffirmed whether the root causes of 211 accidents of laboratory were appropriate to 'Primary RCA Map Draft'. By complementing the cause which was expected to cause future accidents, the RCA Map for chemical laboratories was developed. Based on 'RCA Map' proposed in this study, the causes of accidents were analysed management systems 35%, monitoring 12.2%, Human Factor Eng. 15.1% and education training 12.1% by the size of the frequency from Phase 1 to Phase 5.

• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.211-216
• /
• 2012

In the phase boundary estimation problem, the estimation performance depends on the initial guess. However, there is no information on the number of bubbles and those positions for the initial guess in real flows. Therefore, it is very important to set appropriate initial guesses from prior information. In this paper, in order to set initial guesses for estimating the phase boundaries in two-phase flows, first, unknown resistivity distribution was estimated using the difference reconstruction method. After that, an adaptive threshold value was automatically computed using intermodes method. Based on this value, the number of bubbles and the initial position were determined. The numerical experiments have been performed to evaluate the estimation performance of the proposed method.