• Journal of Fashion Business
• /
• v.20 no.5
• /
• pp.76-86
• /
• 2016

In this research, the dyeing properies of Amur cork tree on sheep leathers were evaluated. The proper dyeing conditions were identified with K/S values depending on the colorant concentration, dyeing time, dyeing temperature and dye bath pH. For the proper conditions, the changes of color for different mordants(Al, Cu and Fe) were observed as $L^*a^*b^*$ coordinates and H V/C values. The color fastnesses were also examined, and the antimicrobial properties were examined. The results were as follows: For the sheep leather, the optimized dyeing conditions were 300% o.w.f., 40 min., $40^{\circ}C$, and pH 5. The leather color was yellow in the dyeing and mordanting. Although the $L^*a^*b^*$ changed with the mordants and mordanting methods, the overall hue was yellow. The colorfastness to light was reduced compared to original(untreated) sheep leather. The rubbing fastness was generallry satisfactory as 4-5 rating. The dry-cleaning fastness(stain) of leathers were generally at the 4-5 level, but dry-cleaning fastness(fade) was a little reduced compared to original sheep leather. The dyed and pre-mordanted and dyed sheep leather showed excellent antimicrobial properties.

• Journal of Fashion Business
• /
• v.12 no.5
• /
• pp.24-38
• /
• 2008

As an attempt to improve the seaming of clothes exported to China, this study is intended to strengthen the clothing industry in Korea by providing data on the body figures of Chinese women. Direct measurement was conducted on 193 women aged 19-24 residing in Shanghai, China. Then we classified and identified the body types and characteristics of Chinese women based on the drop values suggested by the National Standard of the People's Republic of China(GB/T 1335.2-1997). The following is a summary and conclusion of this study. 1. The following results were obtained by measuring the body sizes of women aged 19-24 living in Shanghai, China. 2. After having conducted a factor analysis on 111 body measurement items, 15 index items, and 11 calculation items, we were able to deduce a total of 6 factors. 3. We categorized the body types of 19-24 year-old women living in Shanghai, China according to the drop values suggested by GB/T 1335.2-1997 where D-type was added to Y, A, B, and C-types for a total of 5 categories. The characteristics of each body type following the body type structure factor are Y-type for slender type, A-type for standard type, B-type for slightly large type, and C-type for obese type.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.1
• /
• pp.117-123
• /
• 2014

This paper examined dyeing using sulfur dye with nylon and the characteristics of high gauge knitting for generating high functionality including light weight, wind resistance and elasticity using fine nylon threads. Yarn tension, stitch field and knitting speed of high and fine gauge knitting were measured. The influence of reducing agents on sulfur dye, optimum dyeing conditions and fastness features in nylon dyeing were analyzed. The analysis results are presented below. When nylon (Hyoseong, 40d/34f) and spandex (Hyoseong, 20d) for use as hosiery yarn were used to knit high gauge and flat weave, 44 gauge, the effective knitting conditions were a stitch field over 8.2cm in 1 course length, yarn tension of less than 5g and knitting speed below 18rpm. Nylon dyeing using sulfur dye showed effective results when a rongalite reducing agent was used at more than 10% o.w.f. and dyeing was maintained at $98^{\circ}C$ for 30 minutes. For dyeing nylon and spandex composite using sulfur dye, color fastness in washing, water, daylight and friction were higher than Class 4 or 5, which indicated a superior property. The analysis results verified that the existing problems in nylon dyeing could be solved by using sulfur dyes that don't use heavy metals due to superior fastness and therefore quality, high gauge nylon knit products could be produced.

• Fashion & Textile Research Journal
• /
• v.16 no.3
• /
• pp.485-491
• /
• 2014

This study verified the effect of summer flight ventilation developed in a previous study based on wearing comfort evaluation. Seven healthy males in their twenties volunteered for this experiment conducted in aclimatic chamber. The experiment consisted of three consecutive periods of rest (20 minutes), running on a treadmill (10 minutes) and recovery (20 minutes). A comparative evaluation was conducted on the general flight suit which had no ventilation holes and summer flight suit that use subjective satisfaction measures and objective measures. The subjective satisfaction was evaluated according to the criteria of temperature sensation, wet sensation, thermal comfort and fatigue sensation. The objective satisfaction was measured by skin temperature, microclimate (temperature and humidity), sweat rate and thermography. The comparative wearing evaluation identified the summer flight suit decreased the temperature between skin and suit by $0.42^{\circ}C$ (upper arm), $0.9^{\circ}C$ (calf) and the skin temperature by $0.3^{\circ}C$ (shoulder), $0.4^{\circ}C$ (upper arm), $0.5^{\circ}C$ (calf) as compared to the general flight suit. The humidity inside the summer flight suit decreased at head (7.73%), shoulder (5.86%), upper arm (5.26%), and calf (8.73%) compared to the one inside the general flight suit. Thermography showed that the air flowed through ventilation holes (neck and armpit). The design of ventilation holes applied to the summer flight suit can be applicable to overall clothing that requires thermal comfort such as dust-free garments, mechanical clothing and combat uniforms.

• Fashion & Textile Research Journal
• /
• v.20 no.3
• /
• pp.353-359
• /
• 2018

In this study, fused deposition modellig(FDM) 3D printing technology has been applied directly to polyester voil fabric to produce 3D printed lace/voil composite fabrics. A stereolithograpy(STL) file with a lace type 3D modelling under the various thickness were prepared and transformed into a g-code file using a g-code generator. The extrusion conditions for FDM 3D printing were controlled by 50mm/s of nozzle speed, $235^{\circ}C$ of nozzle temperature, $40^{\circ}C$ of heating bed temperature. 3D printed lace/voil composite fabriscs manufactured by 3D printing based on FDM using a thermoplactic polyurethane(TPU) filaments were obtained. To evaluate the mechanical properties and washability of the fabricated 3D printed lace/voil composite fabric, KES-FB system test, washing fastness test and dry cleaning resistance test were conducted. As 3D printing thickness increased, KOSHI, NUMERI, and FUKURAMI of 3D printed lace/voil composite fabric increased. From the results of the primary hand value test, 3D printed lace/voil composite fabrics were confirmed to be applicable to women's summer garments. As a result of the washability and dry cleaning resistance test of the 3D printed lace/voil composite fabrics, all samples were graded 4-5.

• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.474-481
• /
• 2018

For this study, we developed clothing in which textile materials that were excellent weather control function for the cold environment and we performed the human subject test with developed clothing to determine the thermal comfort. We used 2 clothing samples developed (A and B, hollow yarn+moisture absorption/quick drying yarn, 3 layers, high stretchable, heat reflection film and lamination treated) and a control sample (Ctrl.) for the human subject test and 8 adult males were used as a human subjects and environmental conditions of chamber were $0{\pm}1^{\circ}C$. $50{\pm}5%RH$, 0.3m/sec. The results were as follows: The average skin temperature and hand, thigh temperature of B were higher than B and Ctrl. (p<.05). The micro-climates of B were near to thermal comfort range which is $32{\pm}1^{\circ}C$ and $50{\pm}10%\;RH$. The chest temperature of B was significantly higher than others (p<.05). The relative humidity of B was lower than others and kept stable rather than others. The thermal sensation of B was near the "neutral" and was significantly different from Ctrl. (p<.01) and the weight loss of B was lower than Ctrl. (p<.05). The counting task and hand temperature was positively related and the counting task value of B and A is bigger than Ctrl. and that of A was bigger than Ctrl. (p<.05).

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.1
• /
• pp.43-51
• /
• 2009

The cotton, wool, cotton/wool blended(80:20) and tencel fabrics were treated with low temperature oxygen or argon plasma, enzymes(cellulase or protease), or oxygen plasma-enzyme and examined for their weight loss and conditions for treatment for the environment friendly finishing. In the plasma treatment argon gas had better effect on the weight loss than oxygen gas did and the weight loss of all the fabrics was increased as increasing discharge power and discharge time. The weight loss of cotton, wool, cotton/wool blended(80:20) fabrics decreased in a large measure after 1 hr but that of tencel didn't decrease after 1 hr. In case of cellulose fibers oxygen gas plasma induced chemical functional groups on the surface of substrate more than argon gas plasma did so the weight loss of wool was larger than that of cotton, tencel fabrics in oxygen plasma-enzyme treatment. The weight loss of cotton and tencel fabrics decreased the initial stage because oxygen plasma pre-treatment caused cross linking as well as etching effect but argon plasma pre-treatment didn't. The plasma pre-treatment cleared the way for enzyme treatment on the whole but oxygen plasma pre-treatment bear in hand the increase of weight loss more or less because of the cross linking on the surface of cellulose fibers. The appropriate conditions for plasma treatment was 10-1Torr, 40W for 30minutes and for cellulase treatment were enzyme concentration of $3g/{\ell}$, pH 5, $60^{\circ}C$ for 1hr and for protease treatment were enzyme concentration of $4g/{\ell}$ pH 8, $60^{\circ}C$ for 1hr.

• Fashion & Textile Research Journal
• /
• v.7 no.3
• /
• pp.309-314
• /
• 2005

This study was to determine whether the massage would enhance the physical relaxation in healthy women, and whether the effects of massage on the relaxation would be different by the applied regions of the body. Five healthy young women participated in the two test sessions of back and lower extremities massage in a chamber controlled at an air temperature of $28^{\circ}C$ and a relative humidity of $50{\pm}5%$. The slow stroke massage with lavender aroma oil for 30 minutes was applied to the subjects with a 10-min. and a 20-min rest time before and after the application, respectively. Rectal temperature decreased and the chest and thigh skin temperatures increased with the massage application, and the changes of the temperatures were greater with lower extremities massage than with back massage. Heart rate also decreased during massage period and tended to be lower with lower extremities massage. Systolic and diastolic blood pressure decreased with lower extremities massage. These results show that the slow stroke massage for 30 minutes can induce physiological responses related with the enhanced relaxation in healthy women, and lower extremities massage is more effective on the physical relaxation rather than back massage.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.4
• /
• pp.361-366
• /
• 2002

The change of mechanical properties of drawn PP filaments which was treated by isothermally annealed after elevated heating. Measurements were carried out with UTM for mechanical properties. Isothermally heat treatment were carried out $100^{\circ}C$, $120^{\circ}C$, $140^{\circ}C$ for 10min., 30min., 60min, in silicon oil bath. And isothermally heat treatment after elevated heating from $20^{\circ}C$ were carried out $100^{\circ}C$, $120^{\circ}C$, $140^{\circ}C$ for 10min., 30min., 60min., with heating rate of $1^{\circ}C/min$., $5^{\circ}C/min$., $10^{\circ}C/min$. From the results of this study, it found the following facts. Initial modulus and tensile strength were increased with increasing of annealed temperature and time. Also initial modulus of tensile strength of samples which were isothermally annealed after elevated heating from $20^{\circ}C$ were higher than those of isothermally annealed samples.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.4
• /
• pp.387-392
• /
• 2003

The change of crystalline structure and mechanical properties of PET filaments were investigated. Samples were treated by isothermally annealed after elevated heating. Measurements were carried out of density gradient tube for crystallinity and UTM for initial modulus and yield stress. Isothermally heat treatment were carried out $100^{\circ}C$, $120^{\circ}C$, $140^{\circ}C$ for 10min., 30min., 60min, in silicon oil bath. And isothermally heat treatment after elevated heating from $20^{\circ}C$ were carried out $100^{\circ}C$, $120^{\circ}C$, $140^{\circ}C$ for 10min., 30min., 60min., with heating rate of $5^{\circ}C/min$., $10^{\circ}C/min$. From the results of this study, it found the following facts. It was found that the crystallinity, initial modulus and yield stress of samples were increased with increasing of annealed temperature and time. Also crystallinity, initial modulus and yield stress of samples which were isothermally annealed after elevated heating from $20^{\circ}C$ were larger than those of isohtermally annealed samples.