• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.3
• /
• pp.196-205
• /
• 2023

This study investigated the species composition and bycatch status of fishes by fyke net between June and November 2020 in Asanho lake and Chungjuho lake. During the survey period, the catches in Asanho lake were identified as 2,931 individuals of 16 species from a total of six families and in Chungjuho lake were identified as 1,645 individuals of 14 species from a total of eight families. The dominant species in Asanho lake was Erythroculter erythropterus which accounted for 59.6% of the the total number of individuals and 40.5% of the total biomass caught. The dominant species in Chungjuho lake was Lepomis macrochirus which accounted for 48.2% of the the total number of individuals and Erythroculter erythropterus which accounted for 60.2% of the total biomass caught. The bycatch rates of non-commercial species in Asanho lake and Chungjuho lake were 77.0% and 82.6%, respectively. As a result of analyzing the frequency distribution of the total length of Carassius auratus and Siniperca scherzeri, which were the dominant species among commercial species, the bycatch rate of small individuals was 87.1%, and 42.7%, respectively.

• Journal of Life Science
• /
• v.17 no.12
• /
• pp.1689-1694
• /
• 2007

This study was conducted to investigate both fat-soluble and water-soluble vitamin contents of commercial powdered infant formula for obtaining basic data on infant nutrition. Ten commercial infant formula based on cow's milk were collected and the contents of fat-soluble vitamins (vitamin A, D, E, K) and water-soluble vitamins (vitamin C, thiamin, riboflavin, niacin, $B_6$, folate, $B_{12}$, pantothenic acid, biotin) were compared with Dietary Reference Intakes for Koreans (KDRIs). The overall vitamin contents in 100 g and in 100 kcal of infant formula satisfied the recommended formula regulation (KDRIs) and Codex. In infant formula during 0-5 monthly age, fat-soluble vitamin A, D, E, K could supply 178.6%, 205.3%, 208.4%, 976.3% of adequate daily vitamin intakes, respectively. Water soluble vitamins, vitamin C, thiamin, riboflavin, niacin, $B_6$, folate, $B_{12}$, pantothenic acid, biotin could supply 173.2%, 237.2%, 269.8%, 295.9%, 431.6%, 165.8%, 1186.3%, 203.8%, 408.3% of adequate daily vitamin intakes, respectively. In infant formula during 6-11 monthly age, all vitamins satisfied their adequate daily intakes as well. Vitamin A, D, E, K supplied 199.2%, 262.3%, 220.5%, 626.46% of adequate daily vitamin intakes. Vitamin C, thiamin, riboflavin, niacin, $B_6$, folate, $B_{12}$, pantothenic acid, biotin could supply 179.5%, 210.2%, 264.7%, 241.5%, 206.0%, 166.9%, 699.5%, 247.0%, 475.0% of adequate intake of KDRIs. From this study, evaluation of vitamin contents of commercial infant formula was established, which could strengthen the basic information on infant nutrition.

• The Korean Journal of Mycology
• /
• v.36 no.1
• /
• pp.26-30
• /
• 2008

This study was carried out to develop artificial culture method of Grifola frondosa in polypropylene bag. To find out the favorable substrate formulation of G. frondosa, physicochemical conditions were investigated. The T2 formulation (55 : 25 : 12 : 8) mixing ratio of oak sawdust, oak chip, dried bean-curd refuse and wheat bran showed the shortest time to complete the crop cycle and the highest yield (weight of fresh mushrooms harvested at maturity). Those physicochemical conditions were pH 4.3, 2.4% crude fat contents, 54.1% total carbon, 1.42% total nitrogen, 38.1 C/N ratio, 75.5% porosity and $0.21\;g/cm^3$ bulk density. Among the physicochemical factors, pH, crude fat and total nitrogen may affect mushroom yield. Therefore, development of favorable substrate would be benefit to increase production efficiency of G. frondosa, mushrooms and be commercial potential.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.3
• /
• pp.205-210
• /
• 1998

This study was carried out for the dietary safety based on the level of pesticide residues in 19 kinds of agricultural products consumed in Kangwon-do, Korea. From April 1995 to December 1997, eight organochlorine pesticides in 673 samples were analyzed by using GLC-ECD. According to the results, one kind of pesticides were detected in 159(23.6%) samples and two kinds were in 24(15.1%). While Chlorobenzilate, Dicofol and Tetradifon were not found. Detection ranges of pesticides were $0.001{\sim}0.117ppm$ for DDT, $0.001{\sim}0.095ppm$ for ${\gamma}-BHC$, $0.001{\sim}0.067ppm$ for ${\alpha},{\beta}-Endosulfan$, $0.003{\sim}0.250ppm$ for Chlorothalonil and 0.033ppm for Captafol. Average residues were 0.006ppm for DDT, 0.009ppm for ${\gamma}-BHC$, 0.008ppm for ${\alpha},{\beta}-Endosulfan$, 0.024ppm for Chlorothalonil and 0.033ppm for Captafol, respectively. Consequently, all of the organochlorine pesticide residues in the analyzed samples were within the maximum residue limits.

• Journal of Food Hygiene and Safety
• /
• v.32 no.3
• /
• pp.199-205
• /
• 2017

Although many PCR-based assays have been developed, the majority of rapid detection of Toxoplasma gondii in animal and their meat product has been dependent on immunogenic assays. Thus, there is still a need for more reliable PCR based detection method for T. gondii in retail meats. Recently, a 529-bp repeat element that exists in 200-300 copies per genome of T. gondii genome had been spotlighted for its usefulness as potential detection targers. In this study, the 529-bp repeat element was selected for real-time PCR to detect three types of T. gondii (type I, II and III). A primer pair targeting 82-bp of the 529-bp element detected all three types of T. gondii and showed high level of specificity against 14 different food-borne pathogens as well as 3 protozoan parasites such as Giardia lamblia, Cryptosporidium parvum and Entamoeba histolytica. Application of the new real-time PCR assay in meat samples showed improved detection sensitivity compared to the B1-gene targeted method suggesting potential new target for Toxoplasma gondii screening in retail meats.

• Korean Journal of Ecology and Environment
• /
• v.34 no.3 s.95
• /
• pp.199-205
• /
• 2001

This study was investigated to the assessment of organic pollution using attached diatom assemblages in the Shinchon stream on April, June, September and December 1999. Diatoms were identified total 74 taxa which composed of 68 species, 4 varieties and 2 unidentified species. The Centrales were 5 taxa and Pennales were 69 taxa. Dominant species were Navicula subminuscula, Navicula saprophila and Nitzschia palea which were saprophilous taxa to organic pollution. N. palea was dominant species at st. $1{\sim}3$ on April, June and September and N. subminuscula was recorded as dominant species at st. 4 on June, September and December. N. saprophila was dominated only at station 4 on April. DAIpo values were ranged $0.4{\sim}15.3$ at all stations from April to December and the water qualities were polysaprobic states except to ${\alpha}-mesosaprobic$ state at st. 1 on June. If Navicula sp. was identified as saprophilous taxa, DAIpo value of this station will be 3.5 and water quality of the station will be polysaprobic state. This stream was assessed the water qualities of polysaprobic states.

• Journal of Korean Society of Forest Science
• /
• v.83 no.2
• /
• pp.133-147
• /
• 1994

Wastepaper recycling has significant implications not only in providing scarce raw material input for the paper industry but in environmental concerns such as reducing solid waste disposal, energy conservation and preservation of forest resources. The objectives of this study was (1) to develop an econometric model of demand for and supply of wastepaper, (2) to forecast wastepaper consumption and price to the year 2000 applying the econometric models estimated and (3) to estimate the elasticity of variables which are included in the wastepaper supply and demand equations. In this study wastepaper was classified into three groups, old newsprint, old corrugated and mixed For each group such as demand and supply equation were estimated. The demand equations were estimated as a function of paper and paper product consumption and wholesale price index and supply equations as a function of wastepaper price, one year lagged paper and paperproduct consumption and transportation price. Applying the econometric models to forcasting results in the future consumption and supply of wastepaper projected as 11.645 million MT and 7.396 million MT in 2000, respectively. The rate of wastepaper self-supply is forcasted about 63.5% in 2000. Especially, the rate of old neswprint self-supply is predicted about 16% which means about 2.2 million MT of old newsprint should be imported from foreign countries. Lastly, some policy measures to promote wastepaper recycling rate based upon economic and physical characteristics of wastepaper and market structure are suggested.

• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.136-150
• /
• 2000

For the identification of unknown drugs in biological samples, we attempted rapid high performance thin layer chromatographic method which is sensitive and selective chromatographic analysis of high performance thin layer chromatography (HPTLC) with automated TLC sampler and ultra-violet (UV) scanner. We constructed HPTLC database (DB) on two hundred five drugs by using the data of Rf values and UV spectra (scan 200-360 nm) as well as gas chromatography/mass spectrometry (GC/MS) DB on ninety six drugs by using the data of relative retention time (RRT) on lidocain and mass spectra. After extracting drugs in biological sample by solid phase extraction (Clean Screen ZSDAU020), we applied them to HPTLC and GC/MS DB. Drugs, especially extracted from biological samples, showed good matching ratio to HPTLC DB and these drugs were confirmed by GC/MS. In conclusion, this DB system is thought to be very useful method for the screening of unknown drugs in biological samples.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.3
• /
• pp.197-205
• /
• 2011

Cellulose nanofibrils (CNF) with 50~100 nm diameter were manufactured from micro-size cellulose by an application of a high-pressure homogenizer at 1,400 bar. High strength nanopapers were prepared over a filter paper by a vacuum filtration from CNF suspension. After reinforcing and dispersing CNF suspension, hydroxypropyl cellulose (HPC) and polyvinyl alcohol (PVA)-based composites were tailored by solvent- and film-casting methods, respectively. After 2, 4, 6 and 8 passes through high-pressure homogenizer, the tensile strength of the nanopapers were extremely high and increased linearly depending upon the pass number. Chemical modification of 1H, 1H, 2H, 2H-perfluorodecyl-triethoxysilane (PFDTES) on the nanopapers significantly increased the mechanical strength and water repellency. The reinforcement of 1, 3, and 5 wt% CNF to HPC and PVA resins also improved the mechanical properties of the both composites.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.2
• /
• pp.205-220
• /
• 2010

Purpose : To analyze the effect of implant designs on insertion torque and stress by performing a comparative study on von Mises stress, torque and normal force through a three-dimensional finite element analysis. Materials and methods : Models of the screw type implant were used to model the implant as a form placed in the mandibular premolar region applying a three-dimensional finite element method. Screw type implant designs were classified into 4 types of parallel ones and 7 types of tapered ones. Other factors were simulated to represent clinical environment. Results : In parallel implant designs, higher and wider threads resulted in higher insertion torques and higher stress distributions. In tapered implant designs, changes in the taper led to remarkable differences in the insertion torques. It was difficult to determine a certain tendency of stress distribution around the implants since the stress level was too high around them. In tapered implant designs, smaller implants demonstrated lower insertion torques than the original type and were relatively less dependent on the degree of taper. Tapered implants showed higher insertion torques and higher stress distributions than parallel implants. Conclusion : According to this study, although the tapered implant demonstrated a higher insertion torque than the parallel implant, stress tended to be concentrated in the entire fixture of the tapered implant due to the inefficient stress distribution.