• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.429-438
• /
• 2018

This study analyzed the fit-zone of the neck for females in their 60s. We considered the standard body types of females in their 60s and the four body types from the sixth Size Korea. The results of the study were as follows. We could not determine a pattern formula for the neck based on the changes in the body type of females in their 60s. However, the position of the lateral neck point generally showed a significant difference from that of females in their 20s. In the case of the shoulder angle, the point of the shoulder was angled slightly towards the back in all body types. It was also found that the curve of the neck circumference for both the collar and the bodice should have been smoother than what was shown on the 3D shape. The larger the height difference between the point of the back of the neck and the lateral neck point in the 3D shape, the smoother the design should be at the curve of the circumference at the front of the neck. A larger curvature in the front radius of the 3D shape increased the difference in the shape of the curve between the collar and the basic pattern of the bodice. Hence, a more careful design is required for these parts of the pattern. In addition, the more the front neck is bent, the smoother the circumference curve should be in the pattern design at the front of the neck and the collar.

• The Korean Journal of Quaternary Research
• /
• v.15 no.2
• /
• pp.63-73
• /
• 2001

In total, 29 $^{14}C$ dates were obtained from Paleolithic sites in the Korean peninsula. If not the dates from the Sorori peat layers, the number will be less than 20. Low boundary of Upper Paleolithic could be estimated by some early of the dates from Blade stone industries. Couple of $^{14}C$ dates indicate that beginning of Upper Paleolithic industries could approach to 40 K BP, but it is premature to establish fine chronology of Upper Paleolithic. Some of the $^{14}C$ dates of microlithic industries probably represent too earlier age than generally thought. Tentatively, the beginning of microlithic industries may go back to an age of slightly older than 20 K BP, as indicated in Janghungri, Sokchangni, Noeundong etc. The obtained $^{14}C$ dates at present are very important for construction of Paleolithic chronology. but it is necessary to accumulate for more $^{14}C$ dates in future along with results from other dating techniques and to reconstruct site formation processes for obtaining objective age of stone industries.

• Journal of Bio-Environment Control
• /
• v.26 no.1
• /
• pp.35-42
• /
• 2017

This research was conducted to investigate the influence of post-planting fertilizer concentrations on the growth of seedlings and changes of nutrient concentrations of media in tomato seedling production through sub-irrigation. Two root media such as peat moss (grade of 0 to 6 mm, PM06) plus perlite (grade of 1 to 2 mm (PE2)(7:3, v/v) and peat moss (grade of 5 to 15 mm, PM515) plus PE2 (7:3, v/v) were formulated and filled into 72-cell plug trays. After seeds of 'Dotaerang Dia' tomato were sown and germinated at $28^{\circ}C$, the trays were moved to greenhouse and seedlings were raised 35 days. When the cotyledons were emerged, post-planting fertilizers of 13-2-13, 15-0-15 and 20-9-20 ($N-P_2O_5-K_2O$) were applied in a sequence. The fertilizer concentrations based on N in each plug stage were differed with $25mg{\cdot}L^{-1}$ in three treatments. The fertilizer solutions were supplied when the weight of plug trays decreased to 40 to 50% compared to container capacity. The root media were collected in 1, 2, 4, and 5 weeks after sowing and were divided into top, middle, and bottom parts, then were analysed for pH, EC and macro-nutrient concentrations. The seedling growth was investigated 5 weeks after sowing. The pH and EC in PM06+PE2 was higher than those of PM515+PE2. The bottom and mid-part had higher pH and lower EC compared to upper part in each medium. The differences of EC between upper and bottom parts were around 2 times in each medium. The $NH_4-N$ and K concentrations in program 3 of PM06+PE2 showed the highest concentrations among all treatments. The $NO_3-N$ concentrations in PM06+PE2 increased gradually and this rising tendency become severe as post-planting fertilizer concentrations were elevated. The seedling growth in terms of fresh and dry weights was the highest in the treatment of program 2 in PM06+PE2 among all treatments tested. Above results indicate that the gradual increases of fertilizer concentrations from 25 to $125mg{\cdot}L^{-1}$ in plug stages 2, 3, and 4 plug stages are desirable for

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.141-148
• /
• 1995

Fatigue tests were carried out by a rotary bending testing machine of cantilever type. M.E.F.(ferrite encapsulated islands of martensite) materials were made by a series of heat treatment from a low carbon steel(SM 20 C). The fatigue tests were conducted at stress levels of 302 MPa and with frequencies of 25Hz, 2.5 Hz and 0.5 Hz in 3% NaCl solution. The fatigue strength increased with frequency got higher. The microcracks and corrosion pits were generated at the boundary between the matrix and the 2nd phase. The cracks generated by the corrosion pits were coalesced with the pits around the notch and became the initial crack. The $N_i/N_f$ ratio increased as the frequency and stress level decreased. The interference phenomenon increased with stress level and frequency gots higher. The crack propagation rate was delayed as the stress level lowers and the frequency gets higher, however, the range of the stress intensity factor depended only on a stress level.

• Fashion & Textile Research Journal
• /
• v.13 no.2
• /
• pp.253-262
• /
• 2011

The purpose of this study was improvement of the pants fit for obese women. The results were as follows; 5 obese women in their 20s and 30s were selected for the testing 3D body. They showed no significant differences in all items, comparing with the data of 5th Size Korea body dimensions. The average waist circumstance of the subjects' 3D body dimensions was 87.0 cm and hip circumstance was 102.4 cm, and their obese body types had similar mean values. Based on the survey results and the 3D body dimensions of 5th Size Korea body dimensions, a pants pattern to supplement their body type and improve a fit was designed with waist circumference(88 cm), hip circumference(103 cm), crotch length(27.1 cm), thigh circumference(62 cm), pants length(97 cm), pants hem line circumference(44 cm). Based on the detailed design of ready made pants and the study results of young obese women's preference for pants design, pants of straight silhouette and semi-tight fit which have waist line lowered by 3.5 cm from the waist circumference line, 3.5 cm belt width, no front dart and one back dart, were manufactured with 100% black cotton and cotton spandex mixed fabrics.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.1 s.139
• /
• pp.34-42
• /
• 2005

An overview of 30 feet sailing yacht design is presented, with an emphasis on the factors contributing to start-up popularization. After prescribing the configurations of the purposed yacht, the design of the hull form with a rudder and a keel, are schematically described. Also the determinations of the dimensions of the sail and rig are performed. Finally this paper is associated with the state-of-the-art of calculating sailing yacht performance as this is performed in velocity prediction program (VPP). The VPP results shows a typical shape of a sailing yacht and the designed yacht has the best performance at 120 degree angle of true wind with 20 knots.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.3
• /
• pp.391-401
• /
• 1999

For proper communication among manufactures in various countries and for consumers' convenience in purchasing garments imported from foreign countries the ISO revised the size designation system in 1969. Since 1970's various countries have revised their standard sizing system by adapting the ISO system . The purpose of this study is (1) to satisfy domestic consumer's needs by developing a sizing system based on that of ISO for Korean women in their early twenties and (2) to contribute to entering the international fashion market by manufacturing high quality apparel products The results were as follows: (1) By measuring and analyzing of 464 female between the ages for 18 and 24 the data indicated that body height could be divided into following three groups. S(Short) : 152cm (19.2%) R(Regular) : 160cm (57.8%) L(Long) : 165cm(22.6%) (2) According to the results to analyzing body type of this study the medium hip(drop 6) is 47.4% the large hip(over drop 12) is 42.7% the 2 types covers 90.3% (3) Comparing Korean women's size with foreign women's size DOB size code is 17 JIS size code is 9AR, FNOR size codes are 36n. 38n. and Italian size cods are 40, 42

• Journal of the Korean Solar Energy Society
• /
• v.38 no.3
• /
• pp.29-36
• /
• 2018

The goal of this study is to retrofit the windows of residential buildings and to activate the green remodeling by verifying energy saving and indoor thermal environment. As a result of analysis of the energy saving effect of 458 units window retrofits, it was possible to reduce the energy requirement by 48.20% ~ 54.97%. According to the improvement on indoor environment, it was possible to operate by reducing heating temperature and supply time. The actual gas consumption of the heating period was reduced by 25% compared with that of the window retarder to save 28,968 thousand won of heating energy cost. Resident's satisfaction surveys were conducted one year after window retrofit. More than 80% of the respondents answered that they satisfied the improvement on window performance, indoor thermal environment and indoor sound environment. As a result, we verified the energy saving effect and the improvement on the indoor environment through window retrofits.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.348-353
• /
• 2009

Organic materials reveal the remarkable absorption and high buffer capacity for nutrient. Hence, organic materials need some different nutrient management skill from inorganic one. The objective of this study was to evaluate the effect of EC level of nutrient solution on the yield and quality of cut rose grown in the mixed substrate of coir and perlite. 3 EC levels of nutrient solution was treated, which were 0.7, 1.0, 1.3 times of standard solution (Aichiken solution, Japan) for cut rose hydroponics. EC of the standard solution was changed by season following as 1.4 (Apr.~June), 1.0 (July~Aug.), 1.4 (Sep.~Oct.), and $1.6dS{\cdot}m^{-1}$ (Nov.~Mar.) subsequently. The supply of nutrient solution was controlled by the signal of water potential at -5kPa using frequency domain reflectometry (FDR) sensor. As the results, marketable yield was similar for all treatments until 3rd harvest, but was decreased in high EC level from 4th harvest to 7th harvest as final. 0.7 times of standard solution decreased the ratio of unmarketable rose having short stem below 70cm and increased the ratio of high quality rose having long stem above 91cm. The flower weight and stem diameter of cut rose was higher in the low EC treatment than the others.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.1
• /
• pp.20-28
• /
• 1999

Nine soil media when placed over a plastic sheet with three seeding rates were evaluated for influence on covering rate, height, growth, surface hardness, tear strength and sod establishment of Kentucky bluegrass. 1. Bark, peat and vermiculite over a plastic sheet had good effect in terms of the establishment of Kentucky bluegrass sod. 2. The good establishment of Kentucky bluegrass sod grown on bark, peat and vermiculite over a plastic sheet seemed to be caused by physical and chemical properties of each soil medium. 3. Sand, sandy loam, perlite and peatmoss caused poor effects on the covering rate, the growth, and the tear strength of Kentucky bluegrass. 4. Optimum seeding rate was $10g/m^2$ in terms of density and competition. 5. Good quality sod more depended on soil media than on seeding rates in this study.