• 산업식품공학
• /
• 제14권4호
• /
• pp.354-358
• /
• 2010

The methods for determining the diffusion parameters for the diffusion of d-limonene, a major volatile compound of orange juice, through a multi-layered food packaging material and predicting its absorption into the packaging material have been investigated. The packaging material used was the 1.5-mm thick multi-layered packaging material composed of high impact polystyrene (HIPS), polyvinylidene chloride (PVDC), and low density polyethylene (LDPE). Orange juice was placed in a cell where volatiles were absorbed in the sample package and kept at $23{\pm}2^{\circ}C$ for 72 hr. The d-limonene absorbed in a 1.5-mm thick multi-layered food packaging material was analyzed by a solid phase micro-extraction (SPME). The absorption parameters for the absorption of d-limonene in the packaging material were determined and absorption of d-limonene into the packaging material was predicted using absorption storage data. The SPME desorption at $60^{\circ}C$ for 1 hr resulted in the most sensitive and reproducible results. The diffusion coefficients of d-limonene in the packaging material and the partition coefficient at $23{\pm}2^{\circ}C$ were approximately $1-2{\times}10^{12}m^2$/s and 0.03, respectively. The absorption profile no earlier than 30 hr was fit well by a model derived from the Fick's law.

• 마이크로전자및패키징학회지
• /
• 제31권2호
• /
• pp.16-22
• /
• 2024

Artificial Intelligence(AI) 기술이 발전함에 따라 데이터 센터 분야 등에서 고사양 반도체에 대한 수요가 증가하고 있다. 이러한 추세에 맞춰 반도체 성능을 향상하기 위해 회로의 미세화 및 I/O의 고밀도화가 요구되고 있으며 이를 충족할 수 있는 기술로 차세대 packaging인 2.5dimension(D) packaging이 주목받고 있다. 2.5D packaging에 활용되는 요소 기술로는 microbump, interposer 및bridge die가 있다. 이러한 기술을 적용하면 기존 방식 대비 더 많은 수의 I/O 구현이 가능하여 동시에 다량의 정보를 송수신할 수 있으며, 전기 신호를 전달하는 배선 길이를 단축하여 전력 소모량을 감소시킬 수 있다. 본 논문에서는 molding 공정 및 R DL공정을 융합하여 제작한 Molded Bridge die on Substrate(MBoS) 공정 기술을 제안한다. 제안된 MBoS 기술은 적용이 쉽고 활용 분야가 넓어 차세대 패키징 기술의 대중화에 기여할 것으로 예상된다.

• 마이크로전자및패키징학회지
• /
• 제29권4호
• /
• pp.1-8
• /
• 2022

TSV 기술을 포함한 고밀도, 고집적 패키징 기술은 IoT, 6G/5G 통신, HPC (high-performance computing)등 여러 분야에서 중요한 기술로 여겨지고 있다. 2차원에서 고집적화를 달성하는 것은 물리적 한계에 도달하게 되었으며, 따라서 3D 패키징 기술을 위하여 다양한 연구들이 진행되고 있다. 본 고에서는 scallop의 형성 원인과 영향, 매끈한 측벽을 만들기 위한 scallop-free 에칭 기술, TSV 표면의 Cu bonding에 대해서 자세히 조사하였다. 이러한 기술들은 고품질 TSV 형성 및 3D 패키징 기술에 영향을 줄 것으로 예상한다.

• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.38-47
• /
• 2023

Three dimensional (3D) packaging is a next-generation packaging technology that vertically stacks chips such as memory devices. The necessity of 3D packaging is driven by the increasing demand for smaller, high-performance electronic devices (HPC, AI, HBM). Also, it facilitates innovative applications across another fields. With growing demand for high-performance devices, companies of semiconductor fields are trying advanced packaging techniques, including 2.5D and 3D packaging, MR-MUF, and hybrid bonding. These techniques are essential for achieving higher chip integration, but challenges in mass production and fine-pitch bump connectivity persist. Advanced bonding technologies are important for advancing the semiconductor industry. In this review, it was described 3D packaging technologies for chip integration including mass reflow, thermal compression bonding, laser assisted bonding, hybrid bonding.

• 마이크로전자및패키징학회지
• /
• 제15권1호
• /
• pp.39-44
• /
• 2008

In this paper, fully embedded 2.4GHz WLAN band pass filter (BPF) was investigated into a multi-layered organic packaging substrate using high Q spiral stacked inductors and high Dk MIM capacitors for low cost RF System on Package (SOP) applications. The proposed 2.4GHz WLAN BPF was designed by modifying chebyshev second order filter circuit topology. It was comprised of two parallel LC resonators for obtaining two transmission zeros. It was designed by using 2D circuit and 3D EM simulators for finding out optimal geometries and verifying their applicability. It exhibited an insertion loss of max -1.7dB and return loss of min -l7dB. The two transmission zeros were observed at 1.85 and 6.7GHz, respectively. In the low frequency band of $1.8GHz{\sim}1.9GHz$, the stop band suppression of min -23dB was achieved. In the high frequency band of $4.1GHz{\sim}5.4GHz$, the stop band suppression of min -l8dB was obtained. It was the first embedded and the smallest one of the filters formed into the organic packaging substrate. It has a size of $2.2{\times}1.8{\times}0.77mm^3$.

• 마이크로전자및패키징학회지
• /
• 제21권2호
• /
• pp.53-57
• /
• 2014

Thin glass (< 100 microns) is a promising material from which advanced interposers for high density electrical interconnects for 2.5D chip packaging can be produced. But thin glass is extremely brittle, so mechanical micromachining to create through glass vias (TGVs) is particularly challenging. In this article we show how laser processing using deep UV excimer lasers at a wavelength of 193 nm provides a viable solution capable of drilling dense patterns of TGVs with high hole counts. Based on mask illumination, this method supports parallel drilling of up over 1,000 through vias in 30 to $100{\mu}m$ thin glass sheets. (We also briefly discuss that ultrafast lasers are an excellent alternative for laser drilling of TGVs at lower pattern densities.) We present data showing that this process can deliver the requisite hole quality and can readily achieve future-proof TGV diameters as small $10{\mu}m$ together with a corresponding reduction in pitch size.

• 마이크로전자및패키징학회지
• /
• 제9권1호
• /
• pp.1-7
• /
• 2002

본 연구에서는 이동통신 시스템의 키부품으로 필수적인 멀티미디어용 고주파 Active Filter 및 초소형 설계기술(SMD타입)을 개발하였으며, 멀티미디어 고주파 능동필터의 카오프 주파수는 2.5 mHz, 이득은100 kHz에서 0.5d B, 통과대역 리플은 100 kHz에서 2 MHz까지 최고1.2dB, GDT는 100 kHz에서 2.0 MHz까지 최고 60 nsec이며, 감쇄는 3.7 MHz에서 최소 40dB임.

• 한국축산식품학회지
• /
• 제35권2호
• /
• pp.248-257
• /
• 2015

Effects of double packaging (combinational use of aerobic and vacuum conditions) and antioxidants on physicochemical properties in irradiated restructured chicken rolls were determined. Chicken breast treated with antioxidants (none, sesamol+a-tocopherol) was used to process restructured chicken breast rolls. The sliced rolls were vacuum, aerobic, or double packaged (vacuum for 7 d then aerobic for 3 d) and electron beam irradiated at 2.5 kGy. Color, 2-thiobarbituric acid reactive substances (TBARS), oxidation reduction potentials (ORP), and volatile profiles of the samples were determined at 0 and 10 d. Irradiation made restructured chicken rolls redder (p<0.05), and the increased redness was more distinct in irradiated vacuum-packaged than irradiated aerobic or double packaged meats. TBARS values of antioxidant-treated double packaged rolls were lower than even nonirradiated vacuum-packaged meat, and those were distinct at 10 d (p<0.05). ORP and lipid oxidation values were lower in irradiated vacuum and double packaged samples than those in irradiated aerobic packaged ones at 0 d (p<0.05). Irradiation of restructured chicken rolls increased the amount of total volatiles. Considerable amounts of off-odor volatiles were reduced or not detected by double packaging and antioxidant treatment at 10 d. Therefore, the combined use of antioxidants and double packaging would be useful to reduce redness and control the oxidative quality changes of irradiated restructured chicken rolls

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1587_1588
• /
• 2009

In this paper, PCB embedded balanced-to-unbalamced duplexer using coupled LC resonator was introduced for low cost dualband WiMax front-end-module application. In order to obtain the function of bandpass filter and balun transformer, proposed duplexer was configured by using magnetically coupled LC resonator. Out-of-band suppression was enhanced by applying two m-Derived transform circuits to obtain transmission zeros at 2GHz and 4.8GHz. In order to reduce the size of embedded duplexer, BaSrTiO3 (BST) composite high Dk RCC film was applied to improve the capacitance density. This high Dk film provided the capacitance density of 12.2 pF/mm2. The simulation results shows that fabricated duplexer had an insertion loss of 2.9dB and 5.5dB and return loss of 15dB and 16dB for 2.5GHz~2.6GHz and 3.5GHz~3.6GHz, respectively. The maximum magnitude and phase imbalance were 0.01dB and 0.17dB, and 1degree and 2degree in its passband, respectively. The out-of-band suppression was observed approximately 29dB and 40dB below 1.9GHz and over 4.5GHz, respectively. It has a volume of 6 mm $\times$ 7 mm $\times$ 0.7 mm (height).

• 전자공학회논문지D
• /
• 제34D권2호
• /
• pp.1-9
• /
• 1997

For the reduction of parasitic inductance and matching of bonding wire in the package of microwave devices, we propose multiple bonding wires buried in a dielectric material of FR-4 composite. This structure is analyzed using the method of moments (MoM) and compared with the common bondwires and ribbon interconnections. The FR-4 composite is modelled by the cole-cole model which can consider the loss and the variation of the permittivity in a frequency. At 20 GHz, the parasitic reactance is reduced by 90%, 80%, 60% compared to those of a single bonding wire in air, double bonding wires in air and ribbon interconnection in air, respectively. Also, the new bondwire shows very good matching of 60.ohm characteristic impedance and has 15dB, 10dB, 5dB improvement of the return loss and 2.5dB, 0.7dB, 0.2dB improvement of the insertion loss compared to the common interconnections. This technique can minimize the parasitic effect of bondwires in microwave device packaging.