• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1611-1618
• /
• 2017

This paper presents a compact reconfigurable printed monopole antenna, operating in three different frequency bands (2.45 GHz, 3 GHz and 5.2 GHz), depending upon the state of the lumped element switch. The proposed multiband reconfigurable antenna is designed and fabricated on a 1.6 mm thicker FR-4 substrate having a relative permittivity of 4.4. When the switch is turned ON, the antenna operates in a dual band frequency mode, i.e. WiFi at 2.45 GHz (2.06-3.14 GHz) and WLAN at 5.4 GHz (5.11-5.66 GHz). When the switch is turned OFF, it operates only at 3 GHz (2.44-3.66 GHz). The antenna radiates omni-directionally in these bands with an adequate, bandwidth (>10 %), efficiency (>90 %), gain (>1.2 dB), directivity (>1.7 dBi) and VSWR (<2). The fabricated antenna is tested in the laboratory to validate the simulated results. The antenna, due to its reasonably compact size ($39{\times}37mm^2$), can be used in portable devices such as laptops and iPads.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.215-220
• /
• 2016

In this paper, a wideband antenna accomplished by adding a double sleeve of a rectangular planar monopole structure is proposed. In order to impedance matching of proposed antenna, the antenna performance was improved by adding two gap sleeves and outer sleeve for double sleeve structure. HFSS simulator of ANSYS corp. was used in order to confirm the antenna parameter characteristic. According to the simulation results, the VSWR was less than 2 for the range of 2.5GHz~10.5GHz. The frequency bandwidth is 8GHz. The frequency range of the actual fabricated antenna was 2.92GHz~10.32GHz, the frequency bandwidth is 7.4GHz. The measured radiation pattern frequency is 3GHz, 6GHz and 9GHz. The results are similar with dipole antenna pattern in all frequency. The antenna size is $40{\times}40mm^2$. The utilization possibility of the ultra-wideband planar monopole antenna could be confirmed according to compare and analyze the simulation and measurement data.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.516-521
• /
• 2022

In this paper, a compact 4-bit chipless RFID(radio frequency identification) tag using a modified ELC(electric field-coupled inductive-capacitive) resonator and multiple slot resonators is proposed. The modified ELC resonator uses an interdigital-capacitor structure in the conventional ELC resonator to lower the resonance peak frequency of the RCS. The multiple slot resonators are designed by etching three slots with different lengths into an inverted U-shaped conductor. The resonant peak frequency of the RCS for the modified ELC resonator is 3.216 GHz, whereas those of the multiple slot resonators are set at 4.122 GHz, 4.64 GHz, and 5.304 GHz, respectively. The proposed compact four-bit tag is fabricated on an RF-301 substrate with dimensions of 50 mm×20 mm and a thickness of 0.8 mm. Experiment results show that the resonant peak frequencies of the fabricated four-bit chipless RFID tag are 3.285 GHz, 4.09 GHz, 4.63 GHz, and 5.31 GHz, respectively, which is similar to the simulation results with errors in the range between 0.78% and 2.16%.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.8
• /
• pp.42-50
• /
• 2007

This paper presents design methods for dual-frequency(2.4/5.8GHz) active receiving antennas. The proposed active receiving antennas are designed to interconnect the output port of a wideband antenna to the input port of an active device of High Electron Mobility Transistor directly and to receive RF signals of 2.4GHz and 5.2GHz simultaneously where the impedance matching conditions are optimized by adjusting the length of $1/20{\lambda}_0$(@5.8GHz) CPW transmission line in the planar antenna The bandwidth of implemented dual-frequency active receiving antennas is measured in the range of 2.0GHz to 3.1GHz and 5.25GHz to 5.9GHz. Gains are measured of 17.0dB at 2.4GHz and 15.0dB at 5.2GHz. The measured noise figure is 1.5dB at operating frequencies.

• Journal of Advanced Navigation Technology
• /
• v.20 no.4
• /
• pp.344-351
• /
• 2016

In the present study, a dual-band multiple-input-multiple-output (MIMO) antenna covering WLAN frequency bands of 2.4 GHz (2.4 ~ 2.484 GHz) and 5 GHz (5.15 ~ 5.825 GHz) is newly presented to avoid use of decoupling structure for increasing isolation. The antenna consists of two L-shaped slots with n-shaped slots etched on the floating ground plane surrounded by open ended L-shaped slots which are placed in the left and right corner of PCB respectively. The proposed antenna is designed and fabricated on one side of FR4 substrate with dielectric constant of 4.3, thickness of 1.6 mm, and size of $50{\times}50mm2$. It has been observed that the measured impedance bandwidths ($S_{11}{\leq}-10dB$) are 0.3 GHz (2.28 ~ 2.58 GHz) in 2.4 GHz frequency band and 0.89 GHz (5.11 ~ 6 GHz) in 5 GHz frequency band respectively. In addition, It has been observed that the whole efficiency are more than 80 % in the whole operating frequency band and envelope correlation coefficient of the antenna is less than 0.05 as a very small value in spite of nothing of the decoupling structure.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.623-629
• /
• 2015

In the present study, a coplanar waveguide (CPW)-fed printed monopole antenna with an inverted n-shaped slot is newly proposed for dual band operations which cover bandwidths of CDMA (1.85~2.025 GHz) and WLAN (2.4~2.484 GHz) as well as implementation of omnidirectional radiation pattern. For enhancement of impedance bandwidth ($S11{\leq}10dB$) in 2.4 GHz WLAN frequency band, an inverted n-shaped slot instead of the previous n-shaped slot is etched on the printed radiating monopole. The proposed antenna is designed and fabricated on one side of FR4 substrate with dielectric constant of 4.4, thickness of 1.6 mm, and size of $50{\times}25mm^2$. It has been observed that the measured impedance bandwidths are 280 MHz (1.84~2.12 GHz) in frequency band of CDMA and 420 MHz (2.38~2.8 GHz) in WLAN frequency band respectively. It is noticeable that impedance bandwidth in 2.4 GHz frequency band of WLAN is enlarged to three times due to use of inverted L-shaped slot in comparison with impedance bandwidth 140 MHz (2.39~2.53 GHz) obtained by use of the previous n-shaped slot. In addition, good omnidirectional radiation patterns have been observed over the entire frequency band of interest.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.6
• /
• pp.625-630
• /
• 2011

In this paper, spiral meander monopole printed antenna for dual band operation in GPS(1.57~1.577 GHz) and WiBro(2.3~2.4 GHz), WLAN(2.4~2.48 GHz) is proposed. Spiral(positive coupling) mounted end of monopole(small current) and meander mounted fed of monopole(big current) for reduce frequency ratio. Bandwidth(-10 dB) of the antenna is measured 130 MHz(1.49~1.62 GHz) in basic resonance frequency and 330 MHz(2.29~2.62 GHz) in harmonic resonance frequency($3{\lambda}_H/4$). The peak antenna gains are measured 2.86 dBi in GPS(1.57 GHz), and 3.49 dBi in WiBro(2.35 GHz), and 3.71 dBi in WLAN(2.44 GHz).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2018

In this paper, we propose a film-type dual-band frequency selective structure for improving the wireless communication environment in a building. The proposed frequency-selective structure is a miniaturized structure that can control the resonant frequencies of 2.4 GHz and 5 GHz dual band through simple design parameters. We fabricated the frequency-selective surface by screen printing using conductive ink on a thin transparent film and confirmed its performance by measurement. We analyzed the attenuation performance of the unnecessary signal from the outside when the frequency-selective structure designed using the software to analyze the propagation environment performance is applied to the building. To verify the analytical results, the signal strength of the indoor environment was measured by applying the frequency-selective film fabricated on the inner wall of the actual building. The measurement results show that the dual-band frequency-selective film has 29.4 dB and 15.94 dB attenuation performance in the 2.4 GHz and 5 GHz, respectively.

• The Journal of the Korea Contents Association
• /
• v.7 no.3
• /
• pp.60-67
• /
• 2007

This research studies and analyzes the current trends and the frequency allocation bands for digital cordless phone(DCP) in other country. From these results, we propose 1.7GHz & 2.4GHz as a effective candidate frequency band for domestic DCP. A proposed 1.7GHz is expected to introduce DECT system of Europe. Therefore it is necessary to make an analysis of interference between 1.7GHz band and an adjacent IMT-2000 band. In this paper, we proposed the allocation of channel for 1.7GHz on the basis of the analysis of frequency interference between 1.7GHz band and an adjacent IMT-2000 band.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.535-540
• /
• 2004

In this paper, We proposed a rectangular slot antenna with CPW feeder. Slot antennas fed by CPW are attractive due to the simple fabrication simplicity and ease of integration with active devices. This antenna consists of two parts, inner patch and outer patch to realize wide-band antenna by multi-frequency. Also, We fabricated a proposed rectangular slot antenna, confirm characteristics of multi-frequency by tuning antenna parameters, inner antenna's location and size. The experimental results show that each resonant frequency of a fabricated antenna is measured at almost 1, 9GHz, 2.8GHz, 3, 5GHz, 4, 9GHz. In radiation patterns each resonant frequency, radiation pattern 4-th resonant frequency is the same ad that of TM11 in patch antenna. Therefore, the experimental and theoretical results shows that a proposal rectangular slot antenna have triple resonant frequencies.