• Fire Science and Engineering
• /
• v.32 no.4
• /
• pp.110-121
• /
• 2018

The present article is concerned with a study on the daily training protocol for field crews wearing chemical protection clothing for firefighting and the analysis of activity. To improve coping ability of & secure safety for firefighting crews initially incorporated in the fields of chemical accident & chemical terror, 10 steps in total of daily training protocol have been designed. The designed protocol is largely composed of the extensive activity protocol for daily adaptation of firefighting chemical protection clothing (steps 1, 2, 6, 7 & 9), the precision operation protocol utilizing hands (steps 3, 4 & 5), and the protocol requiring strong physical burdens (steps 8 & 10). According to the measurement results for activity as a result of the protocol, the average maximum heart rate upon wearing the firefighting chemical protection clothing was shown to increase by step 1 20.32%, step 2 18.69%, step 3 25.23%, step 4 34.77%, step 5 27.44%, step 6 30.24%, step 7 25.33%, step 8 22.25%, step 9 22.80% and step 10 20.85% compared with the time of not wearing them. The average maximum breathing rate was shown to increase by step 3 1.92%, step 4 4.11%, step 5 1.24%, step 6 3.95%, step 7 0.93%, step 8 10.23%, step 9 3.36% and step 10 15.10%, except for steps 1 & 2.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.1
• /
• pp.87-95
• /
• 2012

In this study, the following conclusions were obtained from an investigation of the effect of the simulation time step on the simulation results of the two-dimensional, vertically averaged sediment transport model SED2D and an analysis of the deposited sediment distribution in suspended sediments of reservoirs according to grain size. The simulation time step has a significant effect on the deposited sediment distribution in a reservoir. In particular, if the simulation time step is set to be excessively large, physically invalid results are obtained. Additionally, in order to determine an appropriate simulation time step for SED2D, the selection of a simulation time step that will allow the analysis of the suspended sediment concentration profile at the main points of the simulation domain is necessary. The deposited sediment distribution in a reservoir according to grain size, including suspended sediments of clay, silt, and sand, was successfully simulated. Such information will prove valuable in application to the establishment of efficient management and reduction measures of reservoir sediment deposits.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.13
• /
• pp.283-302
• /
• 2000

The firms aim to acquire services and costs advantage from logistics outsourcing strategy. But it is very important to select optimum service provider. A checklist of the criteria for the evaluation of service providers follows : service quality, low cost, logistics information system, service network, financial stability, investments in plant and equipment, management attitude and lookout for the future strategic fit, cultural and psychological barriers etc. Also, a 8-step implement of logistics outsourcing strategy will be of help for maximizing benefits of logistics outsourcing. It follows : 1-step : logistics environment analysis, 2-step : check service provider availability, 3-step : logistics outsourcing determinant analysis, 4-step : select of optimum service provider, 5-step : contract with optimum service provider, 6-step : identify of remaining barriers, 7-step : performance of logistics outsourcing, 8-step : evaluation.

• Journal of Applied Reliability
• /
• v.16 no.2
• /
• pp.125-133
• /
• 2016

Purpose: The purpose of this study is to evaluate durability of platform safety step system in railway. Method: We performed finite element analysis & durability analysis of platform safety step system with VPD (Virtual Product Development) techniques and examined the durability standard & qualification life through the rig test during no failure test time in reliability qualification test. We continued to test 1 million cycles in KRS (Korea Railway Standard) for system's robust design performance. Result: FEM analysis results are 14.9MPa & 14.7MPa of pin-joint, pivot and durability analysis result is above 1 million cycles. we calculated theoretically no failure test time 855,000 cycles and through the 1 million cycles durability rig test in KRS standard we confirmed product quality. Conclusion: This platform safety step system was designed very safe in terms of a mechanical strength & durability.

• Archives of design research
• /
• v.17 no.4
• /
• pp.141-148
• /
• 2004

The purpose of this study is to define the emotion that expressed in step animation and to quantify the intuitional expression of emotion that related step for using extract, measure, analysis the stimulate element about step. The survey of relation with 27 word of emotional expressions and 36 moving pictures of step sample is used for method of this test. The emotional mental structure is transferred to 2 dimensional planes as applying the results of analysis of integrated data using Quantification Method 3, which the integrated data is composed two axial - confidential axial and stabling axial. Analysis of distribution of 2 dimensional diagram shows that the second of the plane and the third of the plane have much data. However, the first of the plane and the forth of the plane have a little data. Through this kind of analysis of graph, it is difficult to express a different emotion between unstable the timidity mind and stable feel the timidity mind using only step analysis. Six difference types about physical elements affecting to emotion are selected and analyzed such as the paces of step, the rate of step, the movement angle of pelvis, the swing range of arm, angle of backbone and the lean angle of body. The result is that the rate of stop and the lean angle of body are the major element that effects to emotional stimulate of stop. This thesis argues about methods transforming subjective expression to objective and quantitative expression with the state of delicate emotion of character apply to step animation naturally. Those data to apply to multi-contents in future are the main target in this study.

• The Journal of the Korean dental association
• /
• v.57 no.8
• /
• pp.437-447
• /
• 2019

Purpose: In recent years, efforts to improve the dental curriculum in South Korea have focused on a shift to outcome-based dental education based on core competencies in dentistry. So far, the field has seen various studies on the development of competencies, performance evaluation, and the importance of outcome-based education, but few studies have documented the development of such an education model. Therefore, this study develops an OBE curriculum for dentistry education and describes the development procedures and then finally this study intends to share our experience to other dental schools. Methods: This study introduces the development procedure and details of an outcome-based education model for dental education and presents the five stages of an outcome-based education model. In this study, 3 educational experts and 2 dental professor composed the TFT and developed the research method according to the ADDIE model. Step 1 is to conduct quantitative / qualitative research analysis through some survey and interview, Step 2 is to do a survey to revise competency, Step 3 is to develop a materials through consensus and participation of our professors of the dental school, Step 4 is to do some workshops, Step 5 is to prepare and conduct a outcome evaluation. Results: Step 1 is a required process for developing an educational model: the Job Analysis & Need Analysis stage. Step 2 is the Development of Outcome and Competency stage, which involves revising the competencies that are the basis of the curriculum. Step 3 is developing competency descriptions, competency levels, and evaluation criteria?the Development of Outcomes and Evaluation Standards. Step 4 is the Development of Milestones for Curriculum and Instructional Strategy, which examines the curriculum's problems and analyzes the improvements of each course. Step 5 is the Evaluating Outcomes stage, conducted based on the competencies specified by the target dental school. Conclustion: The model presented here can serve as a foundation for outcome-based education in other dental schools.

• Journal of the Korean Institute of Gas
• /
• v.18 no.4
• /
• pp.76-85
• /
• 2014

To establish the necessary safety technology in high-pressure toxic gas facilities, especially for the corrosion, which is the main causes of toxic gas accident, this study adopts and investigates the API-581 procedures developed by the American Petroleum Institute (API). And the applicability of the 8-step analytical procedures of consequence analysis in API-581 is discussed, and a method for consequence analysis in high-pressure toxic gas facilities is suggested. Based on the discussion and results, the analytical procedure is simplified as the 6 steps in total for the effective application to high-pressure toxic gas facilities: Step 1 (determination of representative material), Step 5 (determination of release type), Step 6 (determination of phase of fluid), and Step 8 (estimation of damage range) are not applied: Step 3 (estimation of total amount of release) is applied only for the inventory group concept; Step 4 (estimation of release rate) only for the gas release rate; and all of Step 2 (selection of release hole size) and Step 7 (evaluation of post-release response) are applied. In the proposed method, the generally applicable method of CCPS is adopted as alternative method for Steps 5 and 8.

• Physical Therapy Rehabilitation Science
• /
• v.11 no.2
• /
• pp.215-223
• /
• 2022

Objective: This study was to resolve the limitations of the experimental environment and to solve the shortcomings of the method of measuring human gait characteristics using optical measuring instruments. Design: A cross-sectional study. Methods: Fifteen healthy adults without a history of orthopedic surgery on the lower extremities for the past 6 months were participated. They were analyzed gait variables using the smart guide and the 3D image analysis at the same time, and their results were compared. Visual-3D was used to calculate the analysis variables. Results: The reliability and validity of the data according to the two measuring instruments were found to be very high; gait speed(0.85), cycle time(0.99), stride time of both feet(0.98, 0.97) stride legnth of both feet(0.86, 0.88) stride per minute of both feet(0.99, 0.96), foot speed of both feet(0.90, 0.91), step time of both feet(0.77, 0.71), step per minute(0.72, 0.74), stance time of both feet(0.96, 0.97), swing time of both feet(0.93, 0.79), double step time(0.81), initial double step time(0.84) and terminal step time(0.76). Conclusions: In the case of the smart insole, which measures human gait variables using the pressure sensor and inertial sensor inserted in the insole, the reliability and validity of the measured data were found to be very high. It can be used as a device to replace 3D image analysis when measuring pathological gait.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.4
• /
• pp.419-424
• /
• 2000

In this study we have investigated the determination of proper time step in molecular dynamics simulation.Since the molecular dynamics is mathematically related to nonlinear dynamics, the analysis of eigenvalues isused to explain the relationship between the time step and dynamics. The tracings of H2 and CO2 molecular dynamics simulation agrees very well with the analytical solutions. For H2, the time step less than 1.823 fs pro-vides stable dynamics. ForCO2, 3.808 fs might be the maximum time step for proper molecular dynamics. Al-though this results were derived for most simple cases of hydrogen and carbon dioxide, we could quantitatively explain why improperly large time step destroyed the molecular dynamics. From this study we could set the guide line of the proper time step for stable dynamics simulation in molecular modeling software.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.621-635
• /
• 2023

The assessment of structural condition is a crucial process for evaluating its usability and determining the diagnostic cycle. The currently employed manpower-based methods suffer from issues related to safety, efficiency, and objectivity. To address these concerns, research based on deep learning using images is being conducted. However, acquiring structural damage data is challenging, making it difficult to construct a substantial amount of training data, thus limiting the effectiveness of deep learning-based condition assessment. In this study, we propose a foundation model-based 2-step structural damage analysis to overcome the lack of training data in image-based structural condition assessments. We subdivided the elements of structural condition assessment into instantiation and quantification. In the quantification step, we applied a foundation model for image segmentation. Our method demonstrated a 10%-point increase in mean intersection over union compared to conventional image segmentation techniques, with a notable 40%-point improvement in the case of rebar exposure. We anticipate that our proposed approach will enhance performance in domains where acquiring training data is challenging.