• Aerospace Engineering and Technology
• /
• v.10 no.1
• /
• pp.129-135
• /
• 2011

A study of efficient plume cooling by core water injection type was performed by computational fluid dynamics. A side injection type is well known, on the contrary, a core injection type is not well known. In order to figure out the characteristics of core injection type, several calculations were performed by computational fluid dynamics along various mass flow rates and locations of water injection. On the basis of analysis it was the adequate cooling condition that water mass flow rate to total mass flow rate was two times at least and location of water injections was L/De=1.2.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.320-325
• /
• 2015

Flow mark is a sort of surface defect on the composite that can arise during the filling stage of the injection molding process. The purpose of this study is to clarify a mechanism of the flow mark which appears on the surface of injection molded Polypropylene (PP) through the characterization of the surface structure. The materials used in this report are PP/rubber and PP/talc compounding, which are widely used in automobile part. The flow mark shows two different constitutions, such as a luster part and a cloud part on the surface of the injection molded PP. We have investigated the surface structure of PP/rubber and PP/talc composites by using scanning electron microscope (SEM), energy dispersive x-ray spectroscopy (EDAX) and optical microscopy (OM). As a result, the cloud part contains higher contents of the rubber and talc compare to the luster part.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.2
• /
• pp.114-126
• /
• 2013

In this paper, we present a set of methodologies to model the electromagnetic susceptibility (EMS) testing of I/O buffers for mobile system memory based on the bulk current injection (BCI) method. An efficient equivalent circuit model is developed for the current injection probe, line impedance stabilization network (LISN), printed circuit board (PCB), and package. The simulation results show good correlation with the measurements and thus, the work presented here will enable electromagnetic susceptibility analysis at the integrated circuit (IC) design stage.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.5
• /
• pp.58-65
• /
• 2004

A cylindrical constant volume combustion chamber was used to investigate the combustion characteristics of stratified methane-air mixture under several initial charge conditions in the author's previous reports. The results showed that the improvement of thermal efficiency and reduction of heat loss was realized simultaneously by using 2-stage injection method. This paper deals with the reason why the stratified combustion has showed better combustion rate through the measurement and analysis of chemiluminescence of C $H^{*}$ and $C_{2}$$^{*}$ radicals. An optic fiber bundle is used to measure the local emission of C $H^{*}$ and $C_{2}$$^{*}$ radicals to map the relationship between the excess air ratio and local radical intensity ratio in the combustion vessel at 5 mm apart form the geometric center. The results show that there exist a relationship between the intensity ratio and the air-fuel ratio. It is revealed that the improvement of combustion rate in a lean-stratified mixture is realized through the 2-stage injection method. method.

• Journal of Embryo Transfer
• /
• v.13 no.1
• /
• pp.11-19
• /
• 1998

This study was to determine the effect of ionomycin and 6-dimethylaminopurine (6-DMAP) and/or elcetrical stimulation on the oocyte activation and production of rabbit nuclear transplant embryos. The oocytes were collected from the oviduct of superovulated rabbits at 14 h post hCG injection and cultured in TCM-199 containing 10% FBS until 19 h post hCG injection. To determine the optimum concentration and exposure time of 6-DMAP, some oocytes were activated with 5 $\mu$M ionomycin for 5 min and then in 2.0 mM 6-DMAP for 0.5 to 3.0 h, or in 1.0 to 3.0 mM 6-DMAP for 2.0 h. Other control oocytes were stimulated electrically(3X, 1.25 kV/cm, 60 $\mu$sec) in 0.3 M mannitol solution supplemented with 100 $\mu$M CaCl$_2$ and MgCl$_2$. The nuclear donor embryos of 8-cell stage were synchronized to G$_1$ phase of 16-cell stage, and the recipient cytoplasms were obtained from removal of the first polar body and a portion of membrane bound cytoplasm of the oocytes collected at 15 h post hCG injection. A separated blastomere was injected into the perivitelline space of the enucleated oocytes. The oocytes injected with nucleus were cultured until 19 h post hCG and then electrofused and activated by electrical stimulation with or without ionomycin and 6-DMAP. These nuclear transplant embryos were cultured in TCM-199 containing 10% FBS in 39˚C, 5% CO2 incubator for 120 h. For the oncytes activated parthenogenetically with electrical stimulation with or with-out ionomycin and the various concentration of exposure time of 6-DMAP, the highest cleavage(92.3%) and development to blastocyst stage(41.0%) were resulted from the oocytes activated by ionomycin and 2.0 mM 6-DMAP for 2.0 h, which were found to be significantly(P<0.05) higher than the cleavage(45.2%) and developement to blastocyst stage(14.3%) from the oocytes activated with electrical stimulation. The significantly(P<0.05) more oocytes(71.4%) developed to 4 cell stage at 24 h post activation by ionomycin and 6-DMAP than those by electrical stimulation(18.9%). For the nuclear transplant embryos, the cleavage rate was similarly high in oocyte activation by electrical stimulation with(79.4%) or without ionomycin and 6-DMAP(70.5%). However, the embryo development to blastocyst stage was significantly(P<0.05) higher in oocyte activation by electrical stimulation with ionomycin and 6-DMAP(44.4%) than by electrical stimulation only(25.0%). The significantly(P<0.05) more nuclear transplant embryos(45.6%) developed to 4 cell stage at 18 h post activation by electrical stimulation with ionomycin and 6-DMAP than those by electrical stimulation only(10.6%). These results indicated that the supplemental oocyte activation by ionomycin and 6-DMAP with electrical stimulation enhanced and accelerated the preimplanted in vitro development of the rabbit nuclear transplant embryos.

• Journal of Korean Neurosurgical Society
• /
• v.38 no.4
• /
• pp.287-292
• /
• 2005

Objective : Kainic acid[KA] enhances the expression of nitric oxide synthase, increases nitric oxide[NO], and thus evokes epileptic convulsion, which results in neuronal damage in the rat brain. NO may stimulate cyclooxygenase type-2 [COX-2] activity, thus producing seizure and neuronal injury, but it has also been reported that KA-induced seizure and neurodegeneration are aggravated on decreasing the COX-2 level. This study was undertaken to investigate whether the suppression of NO using the NOS inhibitor, N-nitro-L-arginine methyl ester[L-NAME], suppresses or enhances the activity of COX-2. Methods : Silver impregnation and COX-2 immunohistochemical staining were used to localize related pathophysiological processes in the rat forebrain following KA-induced epileptic convulsion and L-NAME pretreatment. Post-injection survival of the rat was 1, 2, 3days and 2months, respectively. Results : After the systemic administration of KA in rats, neurodegeneration increased with time in the cornu ammonis [CA] 3, CA 1 and amygdala, as confirmed by silver impregnation. On pretreating L-NAME, KA-induced neuronal degeneration decreased. COX-2 enzyme activities increased after KA injection in the dentate gyrus, CA 3, CA 1, amygdala and pyriform cortex, as determined by COX-2 staining. L-NAME pretreatment prior to KA-injection, caused COX-2 activities to increase compared with KA- injection only group by 1day and 2days survival time point. Conclusion : These results suggest that L-NAME has a neuroprotective effect on KA-induced neuronal damage, especially during the early stage of neurodegeneration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.57-64
• /
• 2017

Today, due to the environmental regulations regarding air pollution in the EU, the use of EPS (Styrofoam) as the cushioning material in the packaging industry is decreasing. In effect, air cushioning based cushioning materials are rapidly expanding into the market and replacing EPS, due to their excellent buffering ability and environmental friendliness. This is a new selective filling type air filling material manufacturing technology that affords improvements in the amount of raw materials required, its processing and its aesthetic appearance compared to the conventional air filling cushioning materials. In this study, a multi-stage air cell filling valve molding technology is developed based on selective filling technology, which allows packages to be selectively filled in various forms by applying valve forming structure technology. This multi-stage air cell filling valve molding technology is a technique in which a plurality of injection ports are formed by laminating three layers of films, viz. a first injection film, a valve film, and a second injection film having valve ends. In the conventional technology, a separate external air injection path for injecting air into a plurality of connected air bags is needed. However, in the proposed system, an external air injection path is formed inside the air bag, Due to the lack of need for an injection furnace, the raw material and process are reduced and air is injected and then discharged, while the air bag is reduced in length to 63 ~ 66% of its normal value. The outer surface of the outer air injection path is integrated inside by maintaining the original length of the cross section, while the unnecessary folded air is injected into the interior of the air bag, This smart air filling type cushioning material manufacturing technology constitutes a big improvement over the existing technologies.

• Korean Journal of Animal Reproduction
• /
• v.20 no.2
• /
• pp.143-153
• /
• 1996

To improve the efficiency of nuclear transplantation in the rabbit, this study were evaluated the influence of celly cycle of donor nuclei on the in vitro developmental potential in the nuclear transplant embryos. The embryos of 16-cell stage were collected from the mated does at 48h post-hCG injection and they were synchronized to G1 phase of 32-cell stage. Synchronization of the cell cylce of blastomeres were induced, first, using an microtubules polymerization inhibitor, 0.5$\mu\textrm{g}$/ml colcemid for 10h to arrest blastomeres in metaphase, and secondly, using a DNA synthesis inhibitor, 0.1$\mu\textrm{g}$/ml aphidicolin for 1.5 to 2h to cleave to 32-cell stage and arrest them in G1 phase. The separated G1 phase blastomeres of 32-cell stage were injectied into enucleated recipient cytoplasms by micromanipulation. After culture until 20h post-hCG injection, the nuclear transplant oocytes were electrofused and activated by electrical stimulation. The nuclear transplant embryos were co-cultured for 120h. In vitro cultured embryos were monitored every 24h to assess for development rate. After in vitro cultue for 120h, the nuclear transplant embryos developed to blastocyst stage were stained with Hoechst 33342 dye for counting the number of blastomeres under a fluorescence microscopy. The cleavage rate of blastomeres from 16-cell stage stage rabbit embryos treated with colcemid for 10h or aphidicolin for 6h following colcemid for 10h were not significantly different. The electrofusion rate was similar by high in S and G1 phase donor nuclei as 80.6 and 79.1%, respectively. However, the nuclear transplant embryos using G1 phase donor nuclei were developed to blastocyst at high rate(60.3%) than those using S phase donor nuclei(26.0%). Moreover, the mean blastocyst stage were increased significantly(P<0.05) with the G1 phase donor nuclei(176.6 cells and 1.50 cycles), as compared with the S phase donor nuclei(136.6 cells and 1.42 cycles). These results show that the blastomeres of G1 phase were more successful as donor nuclei in the nuclear transplant procedure, compared with S phase.

• Journal of Embryo Transfer
• /
• v.31 no.3
• /
• pp.255-260
• /
• 2016

The aim of this study is to evaluate the effects of vitamin or mineral supplements on the conception rates of dairy heifers when replacing the last injection of GnRH with hCG in ovsynch protocol (experiment 1) and also to investigate whether the estrus synchronization treatment in the heifer stage affects the conception rates after $1^{st}$ parturition (experiment 2). In experiment 1, 50 heifers were randomly assigned into 3 groups: 20 heifers each in groups 1 and 2, and 10 in group 3. All three groups were treated with an intramuscular injection of GnRH on day 0 (day 0 = the day of program start), $PGF_{2{\alpha}}$ on day 7 and hCG on day 9, and were inseminated on day 10, 12~16h after hCG injection. In group 1 (vitamin group), the heifers were treated with an intramuscular injection of 5 ml of vitamin-ADE $500^{(R)}$, and group 2 (mineral group) was treated twice with an intramuscular injection of 30 ml of mineral supplement-LAPTOVET$^{(R)}$ on a one-week interval beginning on the day of hormone treatment (day 0 and day 7 respectively). Group 3 (control) was treated only with hormones. Pregnancy diagnosis was performed by ultrasonography through a rectal probe. First service conception rates (FSCR) and average services per conception (ASPC) were recorded for all subjects. Of the total 50 heifers, 6 (2 in group 1, 3 in group 2, and 1 in group 3) heifers were eliminated due to accidents during experiment 1. FSCRs were 58.8% (10/17), 66.7% (12/18) and 44.4% (4/9) in groups 1, 2 and 3, respectively. ASPCs were $1.53{\pm}0.72$, $1.27{\pm}0.59$ and $1.63{\pm}0.74$ in groups 1, 2 and 3, respectively. Although there were no significant difference between the groups, relatively good results (higher FSCR and lower ASPC) were obtained in both group 1 and 2. In experiment 2, 11 primiparous cows from group 2 of experiment 1 in heifer stage which had been treated both with the hormones for estrus synchronizing and mineral supplements (ES group), and 12 primiparous cows treated only with minerals (non-ES group) were compared to examine the effects of estrus synchronization program on conception rates after $1^{st}$ parturition. Following the examination, postpartum ASPCs were $1.55{\pm}0.82$ and $2.17{\pm}1.47$ in ES group and non-ES group, respectively. The postpartum average days open (ADO) were $116{\pm}56$ and $197{\pm}93$ in ES group and non-ES group, respectively. Although there were no significant difference between the two groups, desirable results (lower ASPC and shorter ADO) were found in ES group after $1^{st}$ parturiton. In conclusion, experiment 1 indicates that vitamin or mineral supplement with ovsynch protocol may have some positive effect on FSCR and ASPC of dairy heifers, and in experiment 2, ES program in heifer stage had a positive effect on ASPC and ADO following $1^{st}$ parturition.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.9
• /
• pp.745-752
• /
• 2006

DOS and NaCl aerosol particles were used to determine collection efficiencies of a 2-stage electrostatic wet scrubber with respect to particle size. The DOS and NaCl aerosols have geometric mean diameters of 0.1-3.0 urn, geometric standard deviations of $1.1{\sim}1.8$ and total number concentrations of $450{\sim}2,400\;particles/cm^3$. The tested operating variables for the electrostatic wet scrubber included air velocity and water injection rate. It was shown from the experimental results that particle collection efficiencies increased in the submicron particle size range when different polarities were applied on the water nozzle and corona wire, respectively. This increase in the collection efficiency is attributed to strong electrostatic attraction between the negative water droplets and positive submicron particles. The collection efficiencies also increased when water injection rate was increased or air velocity was decreased. Meanwhile, the pressure drop across the wet scrubber decreased by 90% compared with the existing mechanical wet scrubber. Finally, ammonia gas was used to determine gas removal efficiencies. It was observed that the gas removal efficiencies increased when the air velocity was decreased or the water injection rate was increased.