• Journal of Biosystems Engineering
• /
• 제33권4호
• /
• pp.260-268
• /
• 2008

Optical diffuse reflectance sensing has potential for rapid and reliable on-site estimation of soil properties. For good results, proper calibration to measured soil properties is required. One issue is whether it is necessary to develop calibrations using samples from the specific area or areas (e.g., field, soil series) in which the sensor will be applied, or whether a general "factory" calibration is sufficient. A further question is if specific calibration is required, how many sample points are needed. In this study, these issues were addressed using data from 42 paddy fields representing 14 distinct soil series accounting for 74% of the total Korean paddy field area. Partial least squares (PLS) regression was used to develop calibrations between soil properties and reflectance spectra. Model evaluation was based on coefficient of determination ($R^2$) root mean square error of prediction (RMSEP), and RPD, the ratio of standard deviation to RMSEP. When sample data from a soil series were included in the calibration stage (full information calibration), RPD values of prediction models were increased by 0.03 to 3.32, compared with results from calibration models not including data from the test soil series (calibration without site-specific information). Higher $R^2$ values were also obtained in most cases. Including some samples from the test soil series (hybrid calibration) generally increased RPD rapidly up to a certain number of sample points. A large portion of the potential improvement could be obtained by adding about 8 to 22 points, depending on the soil properties to be estimated, where the numbers were 10 to 18 for pH, 18-22 for EC, and 8 to 22 for total C. These results provide guidance on sampling and calibration requirements for NIR soil property estimation.

• Structural Engineering and Mechanics
• /
• 제66권2호
• /
• pp.217-227
• /
• 2018

In the last decades, valuable results have been reported regarding conventional passive, active, semi-active, and hybrid structural control systems on two-dimensional and a few three-dimensional shear buildings. In this research, using a three-dimensional finite element model of high-rise concrete structures, designed by performance based plastic design method, it was attempted to construct a relatively close to reality model of concrete structures equipped with Tuned Mass Damper (TMD) by considering the effect of soil-structure interaction (SSI), torsion effect, hysteresis behavior and cracking effect of concrete. In contrast to previous studies which have focused mainly on linearly designed structures, in this study, using performance-based plastic design (PBPD) design approach, nonlinear behavior of the structures was considered from the beginning of the design stage. Inelastic time history analysis on a detailed model of twenty-story concrete structure was performed under a far-field ground motion record set. The seismic responses of the structure by considering SSI effect are studied by eight main objective functions that are related to the performance of the structure, containing: lateral displacement, acceleration, inter-story drift, plastic energy dissipation, shear force, number of plastic hinges, local plastic energy and rotation of plastic hinges. The tuning problem of TMD based on tuned mass spectra is set by considering five of the eight previously described functions. Results reveal that the structural damage distribution range is retracted and inter-story drift distribution in height of the structure is more uniform. It is strongly suggested to consider the effect of SSI in structural design and analysis.

• 한국전자파학회논문지
• /
• 제22권4호
• /
• pp.440-446
• /
• 2011

본 논문에서는 레이더 시스템에 적용이 가능한 50 W 출력을 가지는 X-대역 pulsed SSPA(Solid State Power Amplifier)를 설계 및 제작하였다. SSPA를 펄스 모드로 동작시키는 방법으로 펄스 변조 방법과 전원 스위칭 방법을 혼용한 방법을 제안하였다. SSPA는 구동 증폭기, 고출력 증폭기, 펄스 변조기로 구성되며, 충분한 이득과 출력 크기를 얻기 위해 25 W GaAs FET 4개를 병렬 구조로 구성하였다. 측정 결과 1.12 GHz 대역폭에서 출력 50 W, 이득 44.2 dB의 성능을 가졌다. 또한, pulse droop은 1 dB 이하로 설계 목표를 만족하였으며, 12.45 ns 이하의 상승/하강 시간을 가졌다. 제작된 X-대역 pulsed SSPA 크기는 $150{\times}105{\times}30\;mm^3$로 매우 작은 크기를 가졌다.

• 한국통신학회논문지
• /
• 제33권6B호
• /
• pp.456-468
• /
• 2008

본 논문에서는 혼합형 2단 AWG 기반의 WDM-PON을 하드웨어적으로 구현하기 위한 초기 단계로서 입출력 모듈을 설계하고 로직 시뮬레이션을 통해 동작을 검증한다. 혼합형 2단 AWG 기반의 WDM-PON은 32개의 파장을 통하여 128개의 ONU에게 서비스를 제공한다. 이때, 하향 전송에서 각 ONU는 각기 할당된 별도의 파장을 이용하는 반면 상향 전송의 경우 4개의 ONU가 단일의 파장을 공유하는 형태이다. 설계한 WDM-PON MAC 칩은 sub-MAC을 기반으로 하며, 각 sub-MAC마다 제어부, 수신부 그리고 네 개의 송신부로 구성된다. 따라서 본 논문에서는 sub-MAC을 구성하는 송 수신부의 기능, 사용되는 핀, 제어 신호 및 타이밍을 정의하고 이를 기반으로 각 기능 모듈을 설계한다. 설계한 WDM-PON MAC 칩은 각 입출력 모듈이 1Gbps의 송수신률을 가지는 것을 목표로 하였으며 이 동작을 위하여 125MHz 구동 클럭에 맞도록 설계된다. WDM-PON MAC 칩의 설계과정은 FSM(Finite State Machine)을 이용한 설계 흐름을 따랐으며 설계한 sub-MAC의 입출력 기능의 검증 및 성능 평가를 위하여 ModelSIM에서 각 기능별로 시나리오를 작성하고 이를 기반으로 로직 시뮬레이션을 수행한다.

• 폴리머
• /
• 제32권6호
• /
• pp.573-579
• /
• 2008

두 단계 에멀젼 중합을 통해 PBA/PS 코어-셸 고분자 나노입자 및 실리카가 함유된 유기-무기 하이브리드 재료를 합성하였다. 실리카 나노입자는 코어-셸 고분자 에멀젼과 혼합되어 $Na_2CO_3$가 녹아있는 증류수/메탄올의 혼합용매에 침전되었다. 건조 후 압축성형으로 제조된 시편의 물성평가를 통해 탄성계수는 코어-셸 나노입자의 크기가 작을수록, 분자량이 클수록, 실리카가 많이 첨가될수록 증가함을 확인하였다. 또한 PBA/PS 코어-셸 고분자는 실리카가 13.0 wt% 첨가되었음에도 불구하고 25$^\circ$C, 13.8 MPa, 5분의 조건에서 우수한 압력가소성 특징을 나타내었으며 6배 이상 증가된 탄성계수가 얻어졌다.

• 인간식물환경학회지
• /
• 제23권5호
• /
• pp.545-554
• /
• 2020

Background and objective: Moth orchids in the vegetative stage are suitable for a multi-layer growing environment in a closed-type plant factory which can be a good alternative that can reduce production costs by reducing cultivation time and energy cost per plant. This study was conducted to find out the optimal rhizospheric environment for different irrigation methods without a potting medium and rhizospheric ventilation for the vegetative growth of young Phalaenopsis hybrid 'Blanc Rouge' (P. KV600 × P. Kang 1) and Phalaenopsis Queen Beer 'Mantefon' in a closed-type plant factory system. Methods: The one-month-old clonal micropropagules with bare roots rapped with a sponges were fixed on the holes of styrofoam plates above growth beds, and were watered using the ebb-and-flow (EBB) and aeroponic (AER) methods with Ichihashi solution (0.5 strength) once a day at 06:00 (P) or 18:00 (S), and both (PS). Rhizospheric ventilation (V) was also applied to change the temperature, relative humidity, and CO₂ concentration of the beds. Plants potted into sphagnum moss and watered once a week were used as the control group. Results: After 12 months of treatment, the growth characteristics of the EBB groups were the best among the treatment groups without a medium, but no effect of irrigation timing was observed. V reduced the temperature, relative humidity and CO₂ concentration of the beds. Whereas, EBB+V (ebb-and-flow with ventilation) improved plant growth and reduced the occurrence of disorders and withering. Especially, EBB+V showed a similar performance to the control group. Conclusion: The results indicated that the optimal irrigation method without a potting medium for producing middle-aged potted moth orchids was the EBB system with forced rhizospheric ventilation. Therefore, further studies on the optimal ventilation method and moisture control of the crown need to be carried out to develop the irrigation system without a potting medium for vertical farming in closed-type plant factories.

• Journal of Periodontal and Implant Science
• /
• 제53권1호
• /
• pp.38-53
• /
• 2023

Purpose: The current Classification of Periodontal and Peri-Implant Diseases and Conditions, published and disseminated in 2018, involves some difficulties and causes diagnostic conflicts due to its criteria, especially for inexperienced clinicians. The aim of this study was to design a decision system based on machine learning algorithms by using clinical measurements and radiographic images in order to determine and facilitate the staging and grading of periodontitis. Methods: In the first part of this study, machine learning models were created using the Python programming language based on clinical data from 144 individuals who presented to the Department of Periodontology, Faculty of Dentistry, Süleyman Demirel University. In the second part, panoramic radiographic images were processed and classification was carried out with deep learning algorithms. Results: Using clinical data, the accuracy of staging with the tree algorithm reached 97.2%, while the random forest and k-nearest neighbor algorithms reached 98.6% accuracy. The best staging accuracy for processing panoramic radiographic images was provided by a hybrid network model algorithm combining the proposed ResNet50 architecture and the support vector machine algorithm. For this, the images were preprocessed, and high success was obtained, with a classification accuracy of 88.2% for staging. However, in general, it was observed that the radiographic images provided a low level of success, in terms of accuracy, for modeling the grading of periodontitis. Conclusions: The machine learning-based decision system presented herein can facilitate periodontal diagnoses despite its current limitations. Further studies are planned to optimize the algorithm and improve the results.

• 한국항해항만학회지
• /
• 제28권3호
• /
• pp.213-219
• /
• 2004

본 논문에서는 1,452∼l,492 MHz L-Band 대역의 위성 DAB 수신기를 위한 저잡음증폭기를 입ㆍ출력 반사계수와 전압정재파비를 개선하기 위하여 평형증폭기 형태로 설계 및 제작하였다. 저 잡음증폭기는 GaAs FET소자인 ATF-10136을 사용한 저 잡음증폭단과 MMIC 소자인 VNA-25을 사용한 이득증폭단을 하이브리드 방식으로 구성하였으며, 최적의 바이어스를 인가하기 위하여 능동 바이어스 회로를 사용하였다. 적용된 능동 바이어스 회로는 소자의 펀치오프전압($V_P$)과 포화드래인 전류($I_{DSS}$)의 변화에 따라 주어진 바이어스 조건을 만족시키기 위해 소스 저항과 드래인 저항의 조절이 필요없다. 즉, 능동 바이어스 회로는 요구된 드래인 전류와 전압을 공급하기 위해 게이트-소스 전압($V_{gs}$)을 자동적으로 조절한다. 저잡음증폭기는 바이어스 회로와 RF 회로를 FR-4기판 위에 제작하였고, 알류미늄 기구물에 장착하였다. 제작된 저잡음증폭기는 이득 32 dB, 이득평탄도 0.2 dB, 0,95 dB 이하의 잡음지수, 입ㆍ출력 전압정재파비는 각각 1.28, 1.43이고, $P_{1dB}$ 는 13 dBm으로 측정되었다.

• Clinical and Experimental Reproductive Medicine
• /
• 제26권1호
• /
• pp.9-20
• /
• 1999

The genetic defects in human gametes and embryos can cause adverse effects on overall reproductive events. Biopsy of embryos for preimplantation genetic diagnosis (PGD) offers a new possibility of having children free of the genetic disease. In addition, advanced embryo culture method may enhance the effectiveness of embryo biopsy for the practical application of PGD. This experimental study was undertaken to evaluate the effects of coculture on the development in vitro of biopsied mouse embryos as a preclinical model for PGD of human embryos. Embryos were obtained after in vitro fertilization (IVF) from F1 hybrid mice (C57BLfemale/CBAmale). Using micromanipulation, 1, 2, 3 or 4 blastomeres of 8-cell stage embryos were aspirated through a hole made in the zona pellucida by zona drilling (ZD) with acidic Tyrode's solution (ATS). After biopsy of blastomeres, embryos were cultured in vitro for 110 hours in Ham's F-10 supplemented with 0.4% BSA or cocultured on the monolayer of Vero cells in the same medium. The frequence of blastocyst formation were recorded, and the embryos beyond blastocyst stage were stained with 10% Giemsa to count the total number of nuclei in each embryo. There was no significant difference in the blastocyst formation between the zona intact control group and the zona drilling (ZD) only, or biopsied groups. The hatching rate of all the treatment groups except 4/8 group was significantly higher than that of control group. In all the treatment groups, there was a significant reduction in the mean cell number of embryos beyond blastocyst stage ($50.2{\pm}14.0$ in control group vs. $41.2{\pm}7.9$ in ZD, $39.3{\pm}8.8$ in 7/8, $29.7{\pm}6.4$ in 6/8, $25.1{\pm}5.7$ in 5/8, and $22.1{\pm}4.3$ in 4/8 groups, p<0.05). When the same treatments were followed by coculture with Vero cells, a similar pattern was seen in the blastocyst formation and the hatching rate. However, in all the treatment groups, there was a significant increase in the mean cell number of embryos beyond blastocyst stage with coculture, compared with the parallel groups without coculture. In the cleavage rate of biopsied blastomeres cultured for 110 hours after IVF, there was no significant difference between coculture and non-coculture groups (87.2% vs. 78.7%). However, the mean cell number of embryos developed from the biopsied blastomeres was significantly higher in coculture group ($11.5{\pm}4.7\;vs.\;5.9{\pm}1.9$, p<0.05). In conclusion, biopsy of mouse embryos after ZD with ATS is a safe and highly efficient method for PGD, and coculture with Vero cells showed a positive effect on the development in vitro of biopsied mouse embryos and blastomeres as a preclinical model for PGD of human embryos.

• 복식
• /
• 제51권2호
• /
• pp.149-167
• /
• 2001

Today, every culture has taken on the compromise form by means of the cultural difference, variety, and pluralism according to the internationalization and the advance so that it has been developed toward the half-blooded and multilayered the aspect. In accordance with this current of the times, this thesis observed the feminism found in the multiculturism of the end of the 20th century, the third world, and technology with the side of the tendency of modern fashion, considered the hybride phenomenon which is pulling down the wall between culture and genre due to the social diversification. and predicted the fashion trend do 21st century serf on it. Multiculturism is the movement that began to arise in the academic world of America and the literary world form the close of 1980's in accepting the variety of culture and regarding the culture with the more balanced and wide view and just as it is, it means the attitude of accepting one or more cultures of variely and the position of taking interest in the culture of minority race not the culture of a governing race. It is the fashion of feminism adapts dualism like unisex, androgynous look, etc of bisexual lendency in the 1980's, it shows new style with crossover of liberal sense because there is not the difference of sex in fashion. The eco-feminism pursues the natural sexuality not being instrumental and dismantling and expressed it in the Gender expression of an integrated human being. The trend of ethnic fashion in the close of 20th century is that the element of hippie is working so strongly. By adding embroidery of Oriental style, accessories of Indian style, feathers, beads, a hempen hood to the ethnic costumes of Asia and Latin, is shows the figure of ethnic hippie. As the cycler fashion is the future clothes through technology of computer, it uses a cool glass material bringing up the image of a spacesuit in order to expresses cyber image through artificial color combination of sheen colors, Though this techno-color fashion has established the fresh stimulation and the innovative aspect with ultramodern materials and image of futurism, it transmits a hope of estranged people and the natural elements. Hybride means a cross and mixture of animal and plant in Korean and is also called fusion. The phenomenon of hybrid predicts to comes the period of a cross and variation because something completely new comes into the world by contamination, mixture and compromise through meeting something different each other and it has on advantage of developing something existing to one more stage. It is prospected that in the society of 21st century, the borderline of traditional gender will be disappeared, variety and individuality will determine the individual behavior, and the masculine value will be substituted by feminine value. In the society giving priority to feminine value, a fashion stuck closely to women is what must reflect lives of woman under the proposition of woman's beauty, being on original function. So, it is considered that a fashion with added convenience and practicality having the function which is easy to put on, comfortable to act, able to express solves so much, and able to show various appearances according to T.P.O will get into the spotlight.