• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.1
• /
• pp.49-54
• /
• 2016

The large scaled lead-acid battery is widely used for efficient operation of the photovoltaic system in many islands. However, lithium-ion battery is now being introduced to mitigate the fluctuation of wind power and to replace lead-acid battery. Therefore, hybrid ESS (Energy Storage system) that combines lithium-ion battery with lead-acid battery is being required because lithium-ion battery is costly in present stage. Under this circumstance, this paper presents the optimal algorithm to create composition rate of hybrid ESS by considering fixed and variable costs in order to maximize advantage of each battery. With minimization of total cost including fixed and variable costs, the optimal composition rate can be calculated based on the various scenarios such as load variation, life cycle and cost trend. From simulation results, it is confirmed that the proposed algorithms are an effective tool to produce a optimal composition rate.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.2 no.2
• /
• pp.129-132
• /
• 2001

Biometabolic assessment was made in early and late embryonic stage (just before hatching) of one poly, one bi and their hybrids (DP, YPe, DP ${\times} Ype, and YPe ${\times} DP respectively ) of Bombyx mori to observe the racial differences. Protein and nucleic acid (RNA and DNA) concentrations were recorded to be significantly higher in bivoltine breed (YPe) and also in the hybrid than the polyvoltine (DP) strain in both the stages of embryonic development. The single egg weight of polyvoltine race was lower as compared to that of bivoltine and the hybrid studied. Age specific changes in all the biomolecules were evident where protein and RNA concentrations were elevated sharply in prehatched larvae while in case of DNA it was observed to be just reverse. The differences in protein, RNA and DNA composition between breeds and hybrids reflect the racial variations in biometabolic demands responsible for differential growth and development of the breeds and hybrids.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.4
• /
• pp.443-450
• /
• 2014

This paper presents a 20-Gb/s optical receiver circuit fabricated with standard 65-nm CMOS technology. Our receiver circuits are designed with consideration for parasitic inductance and capacitance due to bonding wires connecting the photodetector and the circuit realized separately. Such parasitic inductance and capacitance usually disturb the high-speed performance but, with careful circuit design, we achieve optimized wide and flat response. The receiver circuit is composed of a transimpedance amplifier (TIA) with a DC-balancing buffer, a post amplifier (PA), and an output buffer. The TIA is designed in the shunt-feedback configuration with inductive peaking. The PA is composed of a 6-stage differential amplifier having interleaved active feedback. The receiver circuit is mounted on a FR4 PCB and wire-bonded to an equivalent circuit that emulates a photodetector. The measured transimpedance gain and 3-dB bandwidth of our optical receiver circuit is 84 $dB{\Omega}$ and 12 GHz, respectively. 20-Gb/s $2^{31}-1$ electrical pseudo-random bit sequence data are successfully received with the bit-error rate less than $10^{-12}$. The receiver circuit has chip area of $0.5mm{\times}0.44mm$ and it consumes excluding the output buffer 84 mW with 1.2-V supply voltage.

• Journal of Sensor Science and Technology
• /
• v.24 no.6
• /
• pp.359-363
• /
• 2015

This paper proposes an algorithm that reduces the conversion time of a single-slope A/D converter (SSADC) that has n-bit resolution, which typically is limited by conversion time taking up to $2^n$ clock cycles for an operation. To improve this situation, we have researched a novel hybrid-type A/D converter that consists of a pseudo-pipeline A/D converter and a conventional SSADC. The pseudo-pipeline A/D converter, using a single-stage of analog components, determines the most significant bits (MSBs) or upper bits and the conventional SSADC determines the remaining bits. Therefore, the modified SSADC, similar to the hybrid-type A/D converter, is able to significantly reduce the conversion time because the pseudo-pipeline A/D converter, which determines the MSBs (or upper bits), does not rely on a clock. The proposed A/D converter was designed using a $0.35-{\mu}m$ 2-poly 4-metal standard complementary metal oxide semiconductor (CMOS) technology process; additionally, its characteristics were simulated.

• Korean Journal of Remote Sensing
• /
• v.27 no.2
• /
• pp.203-211
• /
• 2011

Recently, information communication technologies such as smartphone or mobile app greatly affect various application fields including geo-spatial domain. And development scheme of mobile web app or hybrid app regards as the most important computing technology which is combined each advantage of mobile app and mobile web. Despite these trends, it is general case that satellite images are used for the background image for other contents services. With this motivation, hybrid app for geo-metadata as the base for dissemination and service is designed and implemented as the prototype, in this study. At the design stage, HTML5, which is the core technology on an international standardization process for hybrid app, is applied. In the implementation, PhoneGap and Sencha Touch as mobile SDK(Software Development Kit) supporting HTML5 on cross-platform in open sources are used. In prototype, some KOMPSAT-2 images covering small area and mandatory elements in geo-metafata standard are tested. As mobile industry applications and business service models based on satellite images on mobile platform are progressing and diversifying, it is expected that this approach and implemented prototype are considered as an important reference.

• Clinical and Experimental Reproductive Medicine
• /
• v.28 no.1
• /
• pp.55-63
• /
• 2001

Objectives: This study was carried out to evaluate the effects of embryonic stage, cryoprotectant, and freezing-thawing method on the rates of survival and development of the cryopreserved mouse early embryo and finally to establish the cryopreservation method of surplus embryos obtained during assisted reproductive technology (ART). Materials and Methods: Two to eight cell embryos were obtained from oviducts of mated $F_1$ hybrid female mice superovulated by pregnant mare's serum gonadotropin (PMSG) and human chorionic gonadotropin (hCG). Two-step 1,2-propanediol (PROH), dimethylsulfoxide (DMSO) and 4-step PROH DMSO were used as cryoprotectant and dehydration and rehydration method of embryos, and slow-cooling or rapid-cooling method was used as frozen program. The survival rates of embryos were measured after thawing and rehydration, and the developmental rates of embryos were compared and observed during culturing embryos for 24, 48, 72, 96 hrs. Results: As for the survival and development rates of embryos according to embryonic stage, the survival rate of 2 cell stage in PROH and DMSO was significantly higher than 4-8 cell (64.5% versus 62.1 %,79.7% versus 73.2%) (p<0.01, p<0.01), but the development rates of 4-8 cell embryos in PROH and DMSO were significantly higher than 2 cell embryos for whole culture period (p<0.01) and the development rates of 4-8 cell embryos in PROH were significantly higher than 2 cell embryos in DMSO (p<0.01). As for the survival and development rates of embryos according to cryoprotectant, the survival rate of 2 cell embryo in DMSO was significantly higher than that in PROH (74.4% versus 64.5%) (p<0.01), whereas the development rate of embryos was not differ till 24 hrs. The developmen1 rate from morular to hatching blastocyst, however, was significantly higher in PROH than in DMSO during 48 hr (p<0.01). The survival rate of 4-8 cell embryo was 62.1% in PROH and 73.2% in DMSO. The development rates of embryo in PROH were significantly higher for whole culture periods (p<0.01, 0.05). In respect to the effect of freezing and thawing program on the survival and development rates of embryos, method of slow cooling and rapid thawing was more effective than that of rapid cooling and rapid thawing. Conclusions: The survival rate of embryo in 2 cell stage was higher than in 4-8 cell stage, and PROH appears more effective cryoprotectant than DMSO because PROH showed better development rates of embryos in 2 and 4-8 cell stage. Moreover, slow cooling and rapid thawing method was considered as the best cryopreservation program.

• International Journal of High-Rise Buildings
• /
• v.4 no.1
• /
• pp.9-25
• /
• 2015

Field measurements of various structures have been conducted for many purposes. Measurement data obtained by field measurement is very useful to determine vibration characteristics including dynamic characteristics such as the damping ratio, natural frequency, and mode shape of a structure. In addition, results of field measurements and modal identification can be used for modal updating of FEM analysis, for checking the efficiency of damping devices and so on. This paper shows some examples of field measurements and modal identification for structural health monitoring. As the first example, changes of dynamic characteristics of a 15-story office building in four construction stages from the foundation stage to completion are described. The dynamic characteristics of each construction stage were modeled as accurately as possible by FEM, and the stiffness of the main structural frame was evaluated and the FEM results were compared with measurements performed on non-load-bearing elements. Simple FEM modal updating was also applied. As the next example, full-scale measurements were also carried out on a high-rise chimney, and the efficiency of the tuned mass damper was investigated by using two kinds of modal identification techniques. Good correspondence was shown with vibration characteristics obtained by the 2DOF-RD technique and the Frequency Domain Decomposition method. As the last example, the wind-induced response using RTK-GPS and the feasibility of hybrid use of FEM analysis and RTK-GPS for confirming the integrity of structures during strong typhoons were shown. The member stresses obtained by hybrid use of FEM analysis and RTK-GPS were close to the member stresses measured by strain gauges.

• Smart Structures and Systems
• /
• v.25 no.5
• /
• pp.605-617
• /
• 2020

The existence of damages in structures causes changes in the physical properties by reducing the modal parameters. In this paper, we develop a two-stages approach based on normalized Modal Strain Energy Damage Indicator (nMSEDI) for quick applications to predict the location of damage. A two-dimensional IsoGeometric Analysis (2D-IGA), Machine Learning Algorithm (MLA) and optimization techniques are combined to create a new tool. In the first stage, we introduce a modified damage identification technique based on frequencies using nMSEDI to locate the potential of damaged elements. In the second stage, after eliminating the healthy elements, the damage index values from nMSEDI are considered as input in the damage quantification algorithm. The hybrid of Teaching-Learning-Based Optimization (TLBO) with Artificial Neural Network (ANN) and Particle Swarm Optimization (PSO) are used along with nMSEDI. The objective of TLBO is to estimate the parameters of PSO-ANN to find a good training based on actual damage and estimated damage. The IGA model is updated using experimental results based on stiffness and mass matrix using the difference between calculated and measured frequencies as objective function. The feasibility and efficiency of nMSEDI-PSO-ANN after finding the best parameters by TLBO are demonstrated through the comparison with nMSEDI-IGA for different scenarios. The result of the analyses indicates that the proposed approach can be used to determine correctly the severity of damage in beam structures.

• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.14-18
• /
• 2016

본 연구에서는 하이브리드로켓 모터와 고체로켓 모터를 이용하여 목표 고도 1km인 2단 로켓 설계를 수행하였다. 비행 시나리오는 총 비행시간 51.59초, 1단부 로켓 연소시간은 3초이며 연소 종료 후 3초 뒤 단 분리를 수행하여 2단부 로켓 점화가 이루어져 총 3초간 연소가 진행된다. 1단부 모터는 하이브리드로켓으로써 5port의 HDPE를 연료 그레인으로 사용하였고 $LN_2O$를 산화제로 사용하였다. 2단부 모터는 고체로켓으로 KNSB(Sorbitol/$KNO_3$)추진제를 사용하였다. 단 분리는 영전자석을 이용하여 분리하며 2단부 모터의 점화는 광학 센서와 니크롬선 점화방식을 이용하여 점화하도록 설계하였다. 비행하는 동안 AVR를 이용해 압력, 가속도, GPS 등의 자료를 수집할 수 있도록 설계하였다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.5
• /
• pp.373-378
• /
• 2013

Information on the effective application method of arbuscular mycorrhizal fungi (AMF) inoculum is still inadequate. This work was performed to assess two AMF inoculation methods (dispersed and proximate) on root colonization of sorghum-sudangrass hybrid (Sorghum bicolor L.). In dispersed inoculation method, spores were inoculated in 2 kg pots of soil in which 5 day-old seedlings were transplanted and maintained for 50 days. In the proximate inoculation method, spores were first introduced in 500 mL pots where seeds were sown. After 10 days, the seedlings with the 500 mL soil were transferred to 2 kg pots without disturbing the contents. After 50 days of growth, root colonization and arbuscule abundance significantly increased (over 100%) in proximate method of inoculation. Moreover, sorghum-sudangrass hybrid had higher shoot growth (182.5 cm) and Glomalin related soil protein (GRSP) production in proximate method. Nutrient accumulation, particularly total nitrogen (82.61 mg $plant^{-1}$), was also found to be higher in proximate method of inoculation. Our results demonstrate that the proximate method of inoculation may improve the early stage mycorrhizal symbiosis and inoculum performance in Saemangeum reclaimed soil.